V33 flexible phase input
2097-V33PR1-LM accepts 120/240 V AC in single- or three-phase form and produces 0.5 kW continuous output.
Allen-BradleyKinetix 350 Servo Drives
Allen-Bradley 2097-V33PR1-LM / 2097-V34PR3-LM Kinetix 350 multi-phase EtherNet/IP servo drives
Product Overview
Allen-Bradley 2097-V33PR1-LM / 2097-V34PR3-LM are Kinetix 350 EtherNet/IP servo drives whose catalog numbers define different mains-voltage classes. V33PR1 uses 120/240 V AC, single- or three-phase input and supplies 0.5 kW, while V34PR3 uses 480 V AC three-phase input and supplies 1.0 kW. Neither catalog number includes the V32 integrated AC line filter, so filtering remains an installation selection.
Power entering 2097-V33PR1-LM / 2097-V34PR3-LM is rectified to the model-specific DC bus before the inverter produces the motor output. Both units provide 2.0 A rms continuous and 6.0 A rms peak current, but their shunt thresholds, input current, line protection, and compatible supply wiring follow the V33 or V34 voltage code. This is why a common current value cannot be used as a replacement rule.
For control integration, 2097-V33PR1-LM / 2097-V34PR3-LM exchange commands and status over EtherNet/IP while motor feedback and safe torque-off use dedicated interfaces. Because the output-current class is the same, the full model number is essential to prevent a 120/240 V drive from being mistaken for a 480 V drive. The configured axis must still match the motor and installed supply hardware.
Technical Specifications
| Technical Item | 2097-V33PR1-LM / 2097-V34PR3-LM |
|---|---|
| Brand | Allen-Bradley |
| Product Type | Single-axis EtherNet/IP servo drive |
| Brand Country | United States |
| Product Family | Kinetix 350 |
| V33 AC Input | 120/240 V rms, single- or three-phase |
| V34 AC Input | 480 V rms, three-phase |
| AC Input Frequency | 48–62 Hz |
| Continuous Power Output | 2097-V33PR1-LM: 0.50 kW; 2097-V34PR3-LM: 1.00 kW |
| Continuous Output Current | 2.0 A rms for both models |
| Peak Output Current | 6.0 A rms for both models |
| Nominal AC Input Current | V33 at 240 V: 3.0 A; V34 at 480 V: 2.7 A |
| Integrated AC Line Filter | No |
| Control Power Backup | 20–26 V DC; 500 mA nominal |
| Shunt Switching | V33: 390/375 V DC; V34: 780/750 V DC |
| Controller Interface | EtherNet/IP |
| Safety Interface | Safe torque-off |
| Weight | 1.3 kg / 1.5 kg |
| Maximum Power Loss | 28 W / 39 W |
Operating Characteristics
The common 2.0 A continuous-current rating on 2097-V33PR1-LM / 2097-V34PR3-LM sits behind two different supply and DC-bus designs.
V34 high-voltage input
2097-V34PR3-LM accepts 480 V AC three-phase input and produces 1.0 kW while retaining the same 2.0 A rms continuous-current class.
Different bus thresholds
The V33 shunt switches at 390/375 V DC, whereas the V34 stage switches at 780/750 V DC; the two supply classes are not interchangeable.
Communication and Connectivity
Connection layout
2097-V33PR1-LM / 2097-V34PR3-LM use common control-interface roles even though their incoming power circuits are different.
Network identity
The controller project communicates over EtherNet/IP and must retain the full catalog number so the installed voltage class remains visible.
Feedback return
Motor position data enters the dedicated feedback connector and is processed locally by the drive control loop.
Safety separation
Safe torque-off wiring acts on the drive output stage independently of normal EtherNet/IP commands and the main AC contactor sequence.
Frequently Asked Questions
Why is matching the 2 A output rating not enough to substitute these models across the 2097-V33PR1-LM / 2097-V34PR3-LM model group?
Both drives deliver 2.0 A rms continuously, but 2097-V33PR1-LM is a 120/240 V single- or three-phase unit and 2097-V34PR3-LM is a 480 V three-phase unit. Their rectifier, DC-bus, shunt, protection, and supply wiring requirements differ. This requirement covers 2097-V33PR1-LM / 2097-V34PR3-LM.
For users of 2097-V33PR1-LM / 2097-V34PR3-LM, what continuous power should be used for motor sizing?
For equipment identified as 2097-V33PR1-LM / 2097-V34PR3-LM, use 0.5 kW for 2097-V33PR1-LM and 1.0 kW for 2097-V34PR3-LM. The identical current value does not create an identical power rating because the available voltage at the motor output differs.
Can the V34 drive be energized from a 240 V single-phase source when the catalog group is 2097-V33PR1-LM / 2097-V34PR3-LM?
No. V34 identifies the 480 V rms three-phase input class. A 240 V single-phase installation requires an appropriate V31, V32, or V33 catalog selection rather than a wiring adaptation to V34. The models covered are 2097-V33PR1-LM / 2097-V34PR3-LM.
Regarding 2097-V33PR1-LM / 2097-V34PR3-LM, why do the two models use different shunt thresholds?
Regarding 2097-V33PR1-LM / 2097-V34PR3-LM, their DC buses correspond to different line-voltage classes. V33 switches at 390/375 V DC, while V34 switches at 780/750 V DC, so regenerative components and fault expectations must follow the installed model.
What does an active EtherNet/IP connection prove during troubleshooting for 2097-V33PR1-LM / 2097-V34PR3-LM?
It proves that the controller-data path is operating. It does not prove that motor power, motor feedback, STO, or the supply phase arrangement is correct; each of those circuits must be checked independently. This distinction applies to 2097-V33PR1-LM / 2097-V34PR3-LM.
Within 2097-V33PR1-LM / 2097-V34PR3-LM, which model details should be photographed before ordering a replacement?
Within 2097-V33PR1-LM / 2097-V34PR3-LM, capture the complete catalog number, voltage and phase supply, motor catalog number, and existing line-filter/protection arrangement. The V33 or V34 code is particularly important because both pages can otherwise appear to describe a 2 A Kinetix 350 drive.
Why Choose Moore Automation
Clear supply commitments for industrial spare parts
Moore Automation combines 100% original products, fast delivery, one-year warranty coverage and responsive order communication for industrial automation spare-parts enquiries.
Original productsSupplied products are presented as 100% original.
Fast deliveryOrders are prepared for prompt dispatch coordination.
One-year warrantyCoverage remains linked to the supplied order.
Responsive contactOne contact follows the enquiry and shipment updates.
Recommended Products
GEDS200TBQBG1ACB
HoneywellFC-PAR7810LHT
WAGO750-634
SEW-EURODRIVEMC07A0015-5A3-4-00
ABBPM600084
HoneywellFC-82EN
LenzeEVS9321-ES/EP
OmronCP1L-M40DT-D
BeckhoffEL3202
Siemens6ES7133-1BL01-0XB0
HoneywellFC-TSAO-0220m
Siemens6ES7648-6CA04-4YX0
Rockwell Automation1756-CNBR/A
GEDS200TCEBG1ACE
LenzeEVS9327-ESV004
Rockwell Automation20B-VECTB-C0
GEDS200PLIBG2ACA
LenzeEVS9330-ES/EP
Rockwell Automation1756-IA16
Mitsubishi ElectricQJ71PB92V
GEIC694MDL240C
ABBDI40EX
YaskawaSGDM-15DN
BeckhoffBK2020
HoneywellTC-PMFO01
Schneider ElectricTSXDSZ32T2
OmronCJ1W-PTS51
Siemens6ES7134-6JD00-0CA1
WAGO750-P1-G1-S1-HI-A20-RE
Rockwell Automation1771-ID16
HoneywellCC-TAOX11
Rockwell Automation1746-OW16
OmronCJ1W-MD263
Honeywell51308376-175
OmronNX-SOD400
HoneywellTC-PBFO01
OmronC500-LK009
HoneywellCC-TDIL11
OmronCV500-BSC41
HoneywellCC-PD0B01
OmronCJ1W-ID262
HoneywellTK-3E
OmronCJ2M-CPU11
HoneywellCC-TAIM01
OmronCJ1W-MD233
HoneywellCC-PAIN01
OmronCJ1W-B7A14
Honeywell51404305-225
OmronCP1L-L20DR-D
Honeywell51307715-176
OmronNX-TC3406
HoneywellFC-111P37K
OmronCJ1W-SRM21
HoneywellFC-301PK55T4Z20H3TXCXXXS
OmronNJD-2066C
ABBAI563
Siemens6EP1334-2BA20
HoneywellCC-TAIN01
Mitsubishi ElectricFX2N-16EYT
Schneider ElectricTM3DQ16R
Contact Us
Send the complete model, quantity and destination for a precise quotation.
ContactLeonia
Emailsales@mvme.cn
WhatsApp+86 180 3017 5807
No related record found