BR supply boundary
The BR position permits 380–480 V AC or 513–620 V DC input and must not be confused with the lower- or higher-voltage catalog codes.
Allen-Bradley1336 PLUS II AC Drives
Allen-Bradley 1336F-BRF10-AA-EN 1336 PLUS II adjustable-frequency AC drive
Product Overview
Allen-Bradley 1336F-BRF10-AA-EN is a 1336 PLUS II adjustable-frequency AC drive rated 0.75 kW (1 hp). Its complete catalog code identifies a BR 380–480 V AC or 513–620 V DC supply class, F10 power rating, AA IP20/NEMA 1 enclosure, and English-language configuration. The AA enclosure is intended for protected indoor installation rather than washdown or outdoor exposure.
In 1336F-BRF10-AA-EN, the input stage creates the internal DC bus and the inverter produces variable-frequency, variable-voltage motor output. Run commands, speed reference, status, and option communications use the control section, while the high-current motor terminals remain dedicated to the three-phase output path. The command source and speed-reference source must both agree with the active parameter configuration.
Replacement and commissioning of 1336F-BRF10-AA-EN depend on retaining every catalog position. BR prevents confusion with 230 V or 575 V hardware, F10 fixes the 1 hp rating, AA defines the finger-safe panel enclosure boundary rather than a sealed enclosure, and EN identifies the language group without changing the electrical rating. Any option or modification code on the nameplate must also remain attached.
Technical Specifications
| Technical Item | 1336F-BRF10-AA-EN |
|---|---|
| Brand | Allen-Bradley |
| Product Type | Adjustable-frequency AC drive |
| Brand Country | United States |
| Product Family | 1336 PLUS II |
| Bulletin Code | 1336F |
| Voltage Code | BR |
| AC Voltage Class | 380–480 V AC |
| DC Input Class | 513–620 V DC |
| Rating Code | F10 |
| Nominal Rating | 0.75 kW (1 hp) |
| Enclosure Code | AA |
| Enclosure Type | IP20 / NEMA Type 1 |
| Language Code | EN |
| Language Group | English |
| Power Function | Variable-frequency, variable-voltage motor control |
| Motor Output | Dedicated three-phase inverter output terminals |
| Control Path | Separate command, reference, and status terminals |
| Catalog Requirement | All code positions retained for exact identification |
Operating Characteristics
1336F-BRF10-AA-EN combines the 380–480 V AC supply class with the F10 0.75 kW (1 hp) output rating in the 1336 PLUS II architecture.
F10 power boundary
F10 identifies the 0.75 kW (1 hp) rating; motor current, overload, protection, and conductor sizing must follow that rating and the nameplate.
Inverter output behavior
The drive varies output frequency and voltage to control the connected AC motor, while commands and references remain on the low-level control side.
Configuration and Programming
Terminal and control map
Correct configuration of 1336F-BRF10-AA-EN begins with the complete catalog identity, motor nameplate data, command source, speed reference, acceleration/deceleration values, and protective limits.
Command-source assignment
Run, stop, direction, and other commands must be assigned to the installed terminal or communication option rather than inferred from the family name.
Reference scaling
The selected analog, digital, preset, or communication reference must be scaled to the motor and process speed range before operation.
Parameter and nameplate match
Motor voltage, frequency, current, and base speed values must agree with the connected motor, while the AA enclosure remains inside its IP20/NEMA 1 environmental boundary.
Frequently Asked Questions
Does BRF10 mean a 10 hp drive within the 1336F-BRF10-AA-EN model group?
For 1336F-BRF10-AA-EN, consider the following. No. In this catalog structure, F10 is the 0.75 kW (1 hp) rating code. The BR portion identifies the 380–480 V AC or 513–620 V DC supply class; reading the digits without the catalog-code table can produce the wrong power selection.
Can 1336F-BRF10-AA-EN be installed in a washdown area as supplied?
When 1336F-BRF10-AA-EN is involved, no. AA is IP20/NEMA Type 1, intended for a protected indoor panel environment. It is not a sealed washdown enclosure, so any harsher environment requires a suitable external enclosure designed for that location.
What should be checked when the keypad is active but the motor does not run for equipment identified as 1336F-BRF10-AA-EN?
Confirm the command source, active stop or interlock inputs, speed-reference source, drive-enable state, fault status, and motor-terminal wiring. An energized display proves control power is present, not that a valid run command and reference have reached the inverter. This guidance covers 1336F-BRF10-AA-EN.
For 1336F-BRF10-AA-EN, why must the motor nameplate be entered before tuning or operation?
On 1336F-BRF10-AA-EN, the drive uses motor voltage, frequency, current, and base-speed information to apply limits and scaling. Incorrect values can cause unsuitable current limiting, speed display, or protection even when the BR and F10 hardware codes are correct.
Can control wires be routed with the inverter output leads in relation to 1336F-BRF10-AA-EN?
They should be separated. Motor-output conductors carry switched high-frequency current that can couple noise into analog references, encoder signals, and digital control wiring; use the specified grounding, shielding, and routing practice. The stated boundary applies to 1336F-BRF10-AA-EN.
With 1336F-BRF10-AA-EN under review, which parts of the full model must appear on an RFQ?
Use 1336F-BRF10-AA-EN exactly, plus any separate option or modification codes shown on the nameplate. Omitting BR, F10, AA, or EN loses the voltage, power, enclosure, or language identity needed to match the installed drive.
Quality & Warranty
Original-product supply with recorded coverage
Moore Automation supplies 100% original products and connects one-year warranty coverage to the order record, preserving product identification for subsequent customer communication.
Original productsSupplied items are presented as 100% original.
Identification recordProduct identity remains attached to the order.
One-year warrantyCoverage is linked to the supplied order record.
Customer follow-upSubsequent communication uses the recorded order details.
Recommended Products
WAGO750-479
SICKCLV620-0120
MoxaEDS-308-MM-SC
GEIS200EMIOH1AFB
Rockwell Automation1771-IXE
SICKDT35-B15851
OmronCJ1W-CLK23
BeckhoffEL074010061111A0000
Siemens6ES7532-5HD00-0AB0
HoneywellFC-TSDI-1624
SICKCLV618-D2410
HoneywellCC-100E
ABB3BSE005023R1
WAGO750-606
Mitsubishi ElectricFR-D740-022-EC
ABB1SAP282000R0001
WAGO750-438
Mitsubishi ElectricFX3U-64MR/ES
OmronCS1W-CTS21
Siemens6SN1114-0AA01-0AA0
WAGO750-459
Rockwell Automation1771-IAD
Mitsubishi ElectricMR-J3-200B-RJ004
GEIC694MDL754-CD
ABB1SAP224200R0001
YaskawaSGDB-10VDY1
BeckhoffEL1258
HoneywellFC-SDi-1624
Schneider Electric140AII33000C
OmronCJ2M-CPU12
OmronC200H-PS221
Schneider ElectricTSXAEY810
Siemens6ES7400-1TA01-0AA0
Schneider ElectricBMXXBE2005
Siemens6FC9302-2BK-01
Schneider ElectricTSXCDY120
Siemens6ES5490-8MB11
Schneider ElectricLXM05AD10M2S002
Siemens6GK7243-1EX01-0XE0
Schneider ElectricBMXAMM0600
Siemens6ES7132-6HD01-0BB1
Schneider ElectricBMXDAI1602
Siemens6AV7241-5BB34-0EA0
Schneider ElectricBMXAMI0410
Siemens6ES5241-1AB12
Schneider ElectricTSXDEZ32D2
Siemens6GK60082AS100UT0-ZA01
Schneider ElectricBMXDDI6402K
Siemens6GK5414-3FC00-2AA2
Schneider Electric140CPU67260
Siemens6SL3225-0SE17-5UA3
Schneider Electric140CRP31200
Siemens6ES7134-4JB00-0AB0
Schneider Electric140CPU67160
ABBAI561
Siemens6ES7138-4CB10-0AB0
HoneywellCC-PAIH51
Mitsubishi ElectricQ02HCPU
Schneider ElectricTSXDEY16A2
GEIC695ACC403-BA
Contact Us
Send the complete model, quantity and destination for a precise quotation.
ContactLeonia
Emailsales@mvme.cn
WhatsApp+86 180 3017 5807
No related record found