Front card path
The single-width processing-module pair is installed in front position 01.
Product Introduction
The Meggitt Vibro-Meter ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 is a VM600Mk2/VM600 19-inch, 1U slimline rack for machinery-protection and condition-monitoring systems. Its primary job is to house one single-width processing-module card pair, the associated input/output card and an optional relay card inside a permanent cabinet or panel installation.
At the front of ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00, the processing module occupies card position 01; the rear provides the associated input/output position 01 and the optional relay position 00. The integrated backplane carries the proprietary Open Collector bus and the electrical connections between the installed cards and the RPS1U power supply.
Power for ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 enters the integrated DC-input RPS1U version through the D2 configuration and is distributed as +5 VDC and ±12 VDC. The rear power-supply check relay reports supply status, while the rack DIP switch sets rear-card slot coding from 0 to 12 so the installed card position matches the configured VM600 system.
Technical Information
| Technical item |
|
|---|---|
| Brand | Meggitt Vibro-Meter |
| Product type | VM600Mk2/VM600 slimline rack |
| Product family | VM600Mk2 / VM600 |
| Part number | ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 |
| Rack format | 19-inch slimline rack |
| Rack height | 1U |
| Construction | Zinc-plated painted sheet steel |
| Front position 01 | One single-width processing-module card pair |
| Rear position 01 | Associated input/output module card |
| Rear position 00 | Optional relay module card |
| Backplane | Proprietary VM600 Open Collector bus |
| Integrated power supply | RPS1U |
| Power version | Integrated DC-input version, D2 |
| DC input range | 18 to 58 VDC |
| DC input current | 3.0 A at 24 VDC |
| Output voltages | +5 VDC and ±12 VDC |
| Power check relay | Maximum 60 VDC or 30 VRMS / 1 A |
| Slot coding | DIP-switch configurable |
| Slot coding range | 0 to 12 |
| Mounting | 19-inch cabinet or panel |
| Operating temperature | 0 to 65°C |
| Storage temperature | −40 to 85°C |
| Operating humidity | 0 to 90%, non-condensing |
| Indoor use | Indoor use only |
| Approximate weight | 2.5 kg with RPS1U and installed cards |
System Integration: Rack Slots and Backplane
ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 is the physical rack that joins the processing, input/output and optional relay cards.
→
Rear card path
The associated input/output card uses rear position 01 and the optional relay card uses rear position 00.
→
Shared bus
The integrated backplane provides the Open Collector bus and electrical interconnections between the cards.
Operating Characteristics: Power and Slot Coding
ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 combines an integrated DC-input power supply with configurable rear-card slot coding.
DC supply
The D2 version accepts 18–58 VDC and distributes +5 VDC and ±12 VDC from the RPS1U supply.
-
Supply indication
The rear power-supply check relay changes state within its 60 VDC or 30 VRMS, 1 A switching limit. -
Position code
The rack DIP switch provides slot-number coding from 0 to 12 for the installed rear module.
Frequently Asked Questions
What is ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00?
ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 is a VM600Mk2/VM600 19-inch 1U slimline rack, not a controller or measurement card. It houses the processing pair, associated I/O card and optional relay card.
Which cards fit the front and rear positions of ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00?
In the rack path for ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00, the front position 01 accepts one single-width processing-module card pair. Rear position 01 is for the associated input/output card, and rear position 00 is for an optional relay card.
What does the backplane in ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 carry?
To trace ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00, the integrated backplane carries the VM600 Open Collector bus and the electrical connections between the RPS1U power supply and the installed modules.
What supply does the D2 version of ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 require?
ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 does not choose the external protocol. The D2 version is the integrated DC-input variant. Its RPS1U accepts 18–58 VDC and provides +5 VDC and ±12 VDC to the rack and installed cards; H00 means no mains cable is supplied.
How is the rear card position set on ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00?
When documenting ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00, the rack DIP switch sets the rear-card slot number from 0 to 12. The selected value must match the slot number assigned to the installed module in the VM600 configuration.
Where can ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 be installed?
ABE056 VM600SYSMK2 / B0 / C56S / D2 / H00 is intended for permanent mounting in a 19-inch cabinet or panel and is limited to indoor use within its stated temperature and humidity ranges.
Company Profile
Company Profile
MOORE AUTOMATION
https://www.mvme.cn/
Moore Automation supplies industrial automation parts for control, monitoring and interface systems. The enquiry keeps the requested model, quantity and destination together so the same part reference is visible through the response.
The company profile is built around clear model information and direct contact details. Customers can provide the complete identifier and the site destination in one request.
No related record found