GE IC695CHS016-EA RX3i 16-Slot Universal Backplane
GERX3i BACKPLANE
Dual-bus rack foundation
GE IC695CHS016-EA RX3i 16-Slot Universal Backplane
Sixteen slots for RX3i and compatible serial-bus modules.
Product facts
Product Information
IC695CHS016-EA is a sixteen-slot PACSystems RX3i universal backplane. Its dual-purpose construction carries the high-speed PCI-based bus used by IC695 modules and the serial bus used by compatible IC693 and IC694 modules in the same rack.
The left side of IC695CHS016-EA accepts the RX3i power supply, while the numbered module positions carry the CPU, communication, motion and I/O hardware permitted by each module type. An isolated 24 V DC terminal strip, grounding bar and backplane grounding point provide defined cabinet connections.
Removable slot covers on IC695CHS016-EA protect unused high-speed connectors, and the serial expansion connector at the rack edge provides the path to supported expansion backplanes. Module location rules remain important because not every serial-bus device can occupy every physical position.
Reference values
Technical Data
Brand
GE
Model
IC695CHS016-EA
Product Name
RX3i 16-Slot Universal Backplane
Country
Not specified
Series
PACSystems RX3i
Module Slots
16
Backplane Buses
PCI-based high-speed bus and serial bus
Power-Supply Position
Dedicated left-side connector
Supported Module Families
IC695 plus compatible IC693 and IC694
Expansion Interface
Serial expansion connector
Field Terminal
Isolated 24 V DC input strip
Grounding
Integral grounding bar and backplane ground point
Unused-Slot Protection
Removable high-speed connector covers
Width
604.291 mm nominal
Depth Envelope
140.97 mm maximum / 142.26 mm minimum mounting allowance
Mounting Height
21.615 mm nominal rack profile
Product behavior
Product Functions
IC695CHS016-EA distributes power, bus communication and mechanical alignment across one sixteen-slot RX3i rack.
POWER PATH
Carry supply rails across the rack
The dedicated power-supply connector feeds the backplane rails used by installed CPUs, interfaces and I/O modules.
DUAL BUS
Serve two module architectures
High-speed IC695 devices use the PCI-based path, while compatible serial-bus modules communicate through the parallel rack structure.
MECHANICAL DATUM
Hold modules on a common alignment
Slot guides, retaining points and numbered positions establish repeatable connector engagement and project mapping.
System context
Installation Highlights
IC695CHS016-EA installation depends on a flat mounting surface, deliberate grounding and correct slot use.
MOUNTING
Preserve the rack envelope
Cabinet layout must leave the full backplane width, module depth and service clearance available without twisting the rack.
GROUNDING
Bond the bar and backplane point
Short low-impedance conductors connect the integral grounding features to the cabinet ground system before signal shields are landed.
SLOT RULES
Match each module to a permitted position
The project and physical rack must agree on CPU, power-supply, high-speed and serial-bus slot restrictions.
Practical checks
Product Questions
Can unused IC695CHS016-EA connectors be left uncovered?
Unused high-speed positions on IC695CHS016-EA should retain their removable covers to protect connector pins and limit contamination.
Why does one IC695CHS016-EA slot reject a module that fits elsewhere?
IC695CHS016-EA carries two bus types, and some modules have position restrictions; compare the module family with the permitted slot map.
Which dimensions matter before installing IC695CHS016-EA?
Confirm the IC695CHS016-EA width, depth envelope, power-supply projection, module service clearance and cable bend space.
How is grounding verified on IC695CHS016-EA?
For IC695CHS016-EA, inspect the integral ground bar and backplane grounding point, then measure bonding continuity to the cabinet ground.
Why can an IC695CHS016-EA project show a slot mismatch?
An IC695CHS016-EA mismatch occurs when the downloaded rack map and physical module order differ, even if every module is powered.
What should be inspected when several IC695CHS016-EA modules lose power?
Check the IC695CHS016-EA power-supply seating, rack rails, backplane connectors and total load before troubleshooting the modules individually.
Moore Automation works with industrial automation categories reflected in the company reference, including PLC, HMI, DCS, remote I/O, industrial computers, gateways and related control products. An IC695CHS016-EA enquiry records the complete suffix, quantity, destination and associated rack requirements under one named contact.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found