GE IC200GBI001-FG VersaMax Genius Network Interface Unit
GEVERSAMAX GENIUS
Distributed I/O station interface
GE IC200GBI001-FG VersaMax Genius Network Interface Unit
A Genius-bus head module for VersaMax modular I/O.
Product facts
Product Description
IC200GBI001-FG is a VersaMax Genius Network Interface Unit that connects a modular VersaMax I/O station to a Genius I/O bus. It mounts at the station head on conductive DIN rail and communicates cyclic input, output and diagnostic data with the controlling Genius host.
Rotary switches on IC200GBI001-FG set the station bus address and Genius baud rate without a separate programming tool. Redundant bus connectors allow the trunk to pass through the station, while LEDs distinguish module power, local I/O enablement, forced points, address error and bus activity.
A station headed by IC200GBI001-FG can contain up to sixty-four I/O modules, with up to eight modules per rack segment. The NIU supports 128 bytes of input data and 128 bytes of output data per bus scan, covering discrete and analog information inside the same Genius device.
Reference values
Product Specifications
Brand
GE
Model
IC200GBI001-FG
Product Name
VersaMax Genius Network Interface Unit
Country
Not specified
Series
VersaMax
Network
Genius I/O bus
Station Address
0 to 31 by rotary switch
Supported Baud Rates
153.6 kbit/s extended or standard; 76.8 or 38.4 kbit/s
Modules per Rack
Up to 8
Modules per Station
Up to 64
Input Data per Scan
128 bytes
Output Data per Scan
128 bytes
Discrete Capacity
Up to 1024 inputs and 1024 outputs
DIN Rail
35 mm × 7.5 mm conductive rail
Power Draw
250 mA at 5 V DC; 10 mA at 3.3 V DC
Indicators
Power, OK, fault, I/O enable, force, address and bus status
Product behavior
System Integration
IC200GBI001-FG makes the complete VersaMax station appear as one Genius bus device.
STATION HEAD
Own the local module inventory
The NIU scans the attached rack segments, assigns their data to the station map and reports module-level conditions to the bus host.
BUS DEVICE
Exchange one cyclic station image
Discrete and analog values are packed into the configured input and output data exchanged on each Genius bus scan.
PASS-THROUGH
Continue the Genius trunk
The paired bus connectors let the network enter and leave the station without a break, preserving the trunk topology.
System context
Configuration and Programming
IC200GBI001-FG configuration begins with physical address and rate settings, then continues in the controlling Genius host.
ROTARY SETTINGS
Define address and baud rate locally
The front switches establish the serial bus address and speed, so their physical positions must match the network plan.
I/O MAP
Assign station data in the host
The controlling PLC or computer reserves the station input and output length and interprets the local module order.
FORCE STATE
Keep forced points visible
The force indication warns that a local or controller command is overriding normal data flow and must be resolved before commissioning.
Practical checks
Common Questions
What must accompany an IC200GBI001-FG enquiry?
Provide the full IC200GBI001-FG model, station module list, Genius address, baud rate, quantity and connector or power-supply requirements.
How can a baud-rate mismatch on IC200GBI001-FG be isolated?
Verify the IC200GBI001-FG baud switch and compare it with every device on the Genius trunk before changing cabling or termination.
Which records help diagnose intermittent IC200GBI001-FG bus faults?
For IC200GBI001-FG, record address and rate switches, bus LEDs, cable continuity, termination, trunk length and host diagnostics.
What should be checked when IC200GBI001-FG local I/O is disabled?
Check IC200GBI001-FG power, OK and I/O ENBL indicators, rack connectors, module order and the host command that enables station outputs.
Why can IC200GBI001-FG communicate but report missing modules?
IC200GBI001-FG can remain online while the physical VersaMax module order differs from the configured station map; inspect the first reported slot.
Why does IC200GBI001-FG show an address error?
For IC200GBI001-FG, compare both rotary address switches with the configured Genius address and confirm no other device uses the same value.
Moore Automation uses a named contact and one organized enquiry record to coordinate model checking, quotation details and follow-up. For IC200GBI001-FG, the station head, quantity, destination and related VersaMax items remain separately identified instead of being merged with similar part numbers.
Single contact path
Sales communication stays clear
Exact-model review
Similar items remain separate
Commercial follow-up
Quotation and shipment details
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found