GE IC693MDL655H Series 90-30 32-Point 24 V DC Input Module
GESERIES 90-30 INPUT
Four isolated eight-point groups
GE IC693MDL655H Series 90-30 32-Point 24 V DC Input Module
Thirty-two positive or negative logic inputs with fast response.
Product facts
Product Information
IC693MDL655H is a Series 90-30 discrete input module with thirty-two 24 V DC points. The channels are divided into four isolated groups of eight and each group accepts positive-logic or negative-logic field circuits through its own reference path.
Field wiring for IC693MDL655H uses two 24-pin connectors rather than a removable terminal strip. The connector arrangement divides the four input groups into defined cable interfaces, allowing prewired assemblies or custom harnesses to carry signals between the module and cabinet terminals.
The input circuits in IC693MDL655H respond within 2 ms, while point availability depends on ambient temperature and field-supply voltage. The derating boundary is applied by group, so cabinet temperature and the number of simultaneously energized inputs must be considered together.
Reference values
Technical Data
Brand
GE
Model
IC693MDL655H
Product Name
Series 90-30 32-Point 24 V DC Input Module
Country
Not specified
Series
Series 90-30
Input Count
32
Grouping
Four isolated groups of eight
Rated Voltage
24 V DC
Input Range
0 to 30 V DC
Logic Type
Positive or negative logic
Typical On Current
7 mA at 24 V DC
On-State Voltage
11.5 to 30 V DC
Off-State Voltage
0 to 5 V DC
Response Time
2 ms maximum, on and off
Field-to-Logic Isolation
1500 V
Group-to-Group Isolation
250 V
Backplane Load
195 mA maximum at 5 V DC
Field-Side Load
224 mA typical at 24 V DC with all points on
Product behavior
Product Functions
IC693MDL655H combines four isolated input banks into one 32-point controller image.
GROUP ISOLATION
Keep four field references separate
Each eight-point bank has its own electrical reference, allowing different field groups without tying their commons together.
FAST INPUT
Follow ordinary machine transitions quickly
The 2 ms maximum response reduces input delay compared with slower filtered modules while remaining a level-sensing input.
CABLE INTERFACE
Move dense wiring through two connectors
The 24-pin interfaces carry the grouped signals to external terminal assemblies without a large front terminal block.
System context
Performance Characteristics
IC693MDL655H loading changes with voltage, temperature and the number of active points in each group.
CURRENT
Add channel and indicator demand
Every energized input draws field current and contributes to internal load together with its status indication.
DERATING
Limit active points at high temperature
Above the derating boundary, the permitted number of simultaneously on inputs per group decreases, especially at the higher field-supply voltage.
CABINET
Treat temperature as a local condition
The module’s actual ambient depends on enclosure airflow and neighboring heat sources, not only the room temperature.
Practical checks
Product Questions
What must be checked before loading all IC693MDL655H points?
For IC693MDL655H, compare cabinet temperature and field-supply voltage with the permitted active inputs per group.
What should be documented for an IC693MDL655H enquiry?
Provide IC693MDL655H, connector or cable requirement, field voltage, active-point estimate, quantity and destination.
Why can IC693MDL655H respond differently from a slower input module?
IC693MDL655H has a 2 ms maximum response, so it can pass transitions that a longer filtered input would suppress.
Why do eight IC693MDL655H inputs fail together?
IC693MDL655H uses four isolated eight-point groups, so inspect that group’s supply, reference and connector pins first.
Which polarity applies to IC693MDL655H?
IC693MDL655H supports positive or negative logic, but every group must be wired consistently with its own field reference.
How is an IC693MDL655H cable fault narrowed down?
Compare the IC693MDL655H group, 24-pin connector, cable pinout, remote terminal and channel LED in that order.
The company reference spans brands such as GE, Allen-Bradley, Siemens, ABB, Schneider Electric, Honeywell and Emerson across control and I/O products. For IC693MDL655H, the suffix, cable requirement, quantity and destination remain distinct fields even when a multi-brand request is consolidated.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found