GE IC693APU301P Series 90-30 Motion Mate Axis Positioning Module
GEMOTION MATE APM
Programmable single-axis positioning
GE IC693APU301P Series 90-30 Motion Mate Axis Positioning Module
Integrated motion control with Standard and Follower modes.
Product facts
Product Overview
IC693APU301P is a programmable one-axis Motion Mate Axis Positioning Module for the Series 90-30 PLC. It combines axis motion processing with PLC logic data exchange so sequencing and motion commands operate inside one controller system.
In Standard mode, IC693APU301P executes configured positioning moves and related motion programs. In Follower mode, it provides electronic gearing for continuous master-and-slave operation, using the configured relationship between feedback and commanded axis motion.
The front of IC693APU301P provides a communication connector and two high-density connectors for axis, encoder and machine I/O wiring. The module stores multiple motion programs, reports status to the PLC reference tables and operates from a CPU, expansion or remote baseplate within the documented system limits.
Reference values
Technical Specifications
Brand
GE
Model
IC693APU301P
Product Name
Series 90-30 Motion Mate Axis Positioning Module
Country
Not specified
Series
Series 90-30
Controlled Axes
One
Operating Modes
Standard and Follower
Follower Function
Electronic gearing
Program Storage
Up to 10 motion programs
PLC Interface
Series 90-30 backplane data exchange
Front Connections
Communication plus two high-density I/O connectors
Machine Inputs
Home, limits and configurable discrete functions
Feedback Path
Encoder input
Application Software
VersaPro or Logic Developer-PLC
System Limit
Up to three APM modules per baseplate
Backplane Load
800 mA at 5 V DC
Product behavior
Product Functions
IC693APU301P executes axis-specific motion while the Series 90-30 CPU manages machine sequence and shared logic.
TRAJECTORY
Generate the commanded move
The module processes configured position, velocity and acceleration information without making the PLC solve each motion increment.
FEEDBACK
Close the position relationship
Encoder information and machine inputs let the APM compare commanded motion with axis state and report status to the controller.
PROGRAMS
Store reusable motion sequences
Multiple motion programs can be selected by PLC logic, allowing distinct moves to share the same installed axis hardware.
System context
Configuration and Programming
IC693APU301P configuration defines mode, axis scaling, I/O meaning and the data exchanged with the PLC.
MODE
Choose Standard or Follower behavior
Standard mode focuses on programmed moves; Follower mode establishes an electronic gearing relationship to a master signal.
AXIS DATA
Match counts to machine travel
Encoder resolution, mechanical ratio and engineering units determine how feedback counts represent physical position.
PLC HANDSHAKE
Coordinate commands and status
The CPU writes command data and reads completion, error and axis-state information through the configured reference tables.
Practical checks
Frequently Asked Questions
Why can IC693APU301P stop at the wrong physical position?
IC693APU301P position depends on encoder scaling, home reference, mechanical ratio and accumulated counts; compare all four with the machine datum.
What should be saved before editing IC693APU301P scaling?
Save the IC693APU301P motion programs, encoder counts, mechanical ratio, engineering units, limits and current PLC handshake mapping.
Which connectors belong in an IC693APU301P wiring check?
Inspect the IC693APU301P communication connector and both high-density axis/I/O connectors, including cable pinout and shield continuity.
Why does IC693APU301P report motion but the axis does not move?
For IC693APU301P, check drive enable, axis wiring, machine interlocks, command state and fault/status words before changing motion parameters.
What information is needed for an IC693APU301P enquiry?
Provide IC693APU301P, axis type, encoder interface, required cable assemblies, installed CPU, quantity and destination.
How can follower error on IC693APU301P be investigated?
For IC693APU301P, verify the selected Follower mode, master feedback path, gearing ratio, encoder polarity and drive response.
Moore Automation handles industrial automation products including PLC, HMI, DCS, servo and motion hardware, sensors and related control components. For IC693APU301P, the exact module, cable requirements, installed controller family, quantity and destination are organized without assuming a substitute motion architecture.
Automation range
PLC, HMI and DCS products
Motion products
Servo and positioning hardware
Related components
Sensors and control accessories
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found