GE IC695ETM001-LBAA RX3i Ethernet Interface Module
GERX3i ETHERNET
Dedicated controller network interface
GE IC695ETM001-LBAA RX3i Ethernet Interface Module
Switched Ethernet connectivity for PACSystems services.
Product facts
Product Information
IC695ETM001-LBAA is an RX3i Ethernet interface module that gives a PACSystems controller a dedicated network path for programming, peer data exchange and TCP/IP services. It installs in a universal backplane I/O slot and operates as an option module under the CPU configuration.
The switched copper ports on IC695ETM001-LBAA support automatic speed, duplex and crossover negotiation. The internal switch permits line-style connections without assigning a separate controller identity to each physical port, while link and activity indicators show the state of the individual cable paths.
At the application layer, IC695ETM001-LBAA carries Ethernet Global Data, SRTP client/server traffic and TCP/IP communication together with Station Manager diagnostics. These services remain independently configured even though they share the same physical interface and network identity.
Reference values
Technical Data
Brand
GE
Model
IC695ETM001-LBAA
Product Name
RX3i Ethernet Interface Module
Country
Not specified
Series
PACSystems RX3i
Module Role
Dedicated Ethernet option module
Copper Ports
Switched RJ45 Ethernet interfaces
Port Negotiation
Automatic speed, duplex and crossover
Controller Services
SRTP and programming communication
Cyclic Data
Ethernet Global Data
Diagnostics
Station Manager over Ethernet
Network Layer
TCP/IP
Installation
RX3i universal backplane I/O slot
Insertion
Hot insertion supported in compatible systems
Status Indication
Module, link and activity LEDs
Product behavior
Communication and Connectivity
IC695ETM001-LBAA separates physical port behavior from the network services carried through the interface.
SWITCHED PORTS
Extend one interface across multiple cables
The onboard switch forwards frames between the copper connections while the module keeps one configured network identity.
DATA SERVICES
Carry several traffic types concurrently
Programming, SRTP, EGD and user TCP/IP sessions share the interface but keep separate service parameters and diagnostics.
NEGOTIATION
Adapt each physical link
Speed, duplex and crossover detection occur per port, so one failed link does not by itself define the condition of the other connection.
System context
Diagnostics and Protection
IC695ETM001-LBAA diagnosis follows the path from cable link through IP reachability to the requested service.
PHYSICAL
Start with link and activity
Port indicators establish whether the copper path and peer negotiation are active before protocol settings are examined.
NETWORK
Confirm the configured identity
IP address, subnet and routing determine reachability; duplicate addresses or a wrong mask can interrupt all higher services.
SERVICE
Inspect the failing protocol independently
Station Manager and controller diagnostics distinguish EGD exchange, SRTP sessions and TCP/IP application traffic instead of treating every communication fault as the same event.
Practical checks
Product Questions
Can IC695ETM001-LBAA ports be treated as two independent controller interfaces?
No. The IC695ETM001-LBAA ports are part of one switched interface and do not create two unrelated controller identities.
What should be recorded before moving an IC695ETM001-LBAA cable?
Record both IC695ETM001-LBAA port destinations, switch topology, VLAN context, negotiated speed and the services using each path.
Which records help diagnose intermittent IC695ETM001-LBAA traffic?
For IC695ETM001-LBAA, capture port counters, link events, Station Manager logs, switch logs, EGD status and controller fault timestamps.
Why does IC695ETM001-LBAA have link but no controller connection?
For IC695ETM001-LBAA, verify IP address, subnet, routing and the requested service after confirming the physical link.
How is an address conflict isolated on IC695ETM001-LBAA?
Disconnect one path at a time, compare ARP and Station Manager information, and confirm the configured IC695ETM001-LBAA MAC/IP pair is unique.
Why can EGD fail while SRTP still works on IC695ETM001-LBAA?
IC695ETM001-LBAA configures EGD exchanges separately from SRTP sessions, so check exchange IDs, producer/consumer mapping and timing rather than only link status.
Moore Automation records the requested carrier information, destination, packing notes and tracking details as separate parts of shipment communication. For IC695ETM001-LBAA, connector protection and a visible model label can be included in the packing record before dispatch.
Secure packing notes
Connector protection recorded
Carrier information
Destination and service aligned
Tracking communication
Available milestones shared
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found