Armored lead near the case
The metal armor surrounds the integral cable outside the threaded case. It protects that cable section but is not the signal conductor.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330909-00-16-10-02-00 3300 XL NSv 3/8-24 UNF Armored Proximity Probe |
| Item NO. | 2943239 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 330909-00-16-10-02-00 is an armored 3/8-24 UNF proximity probe for the 3300 XL NSv transducer system. The probe detects target distance at the machine, its armored integral lead protects the cable run near the case, and the NSv Proximitor Sensor supplies the oscillator circuit and converts the returned probe response into a gap-proportional voltage.
In 330909-00-16-10-02-00, the first two mechanical fields define a 0.0 in unthreaded section and a 1.6 in case. The 10 field sets a 1.0 m total length, while option 02 supplies standard cable and a miniature coaxial ClickLoc without a protector; the armor ends before the connector and does not change the connector function.
The 330909-00-16-10-02-00 probe belongs to the NSv system with a 1.5 mm linear range, 1.0 mm recommended gap and 7.87 V/mm nominal scale factor. Its final 00 field is the no-approval ordering option, which is separate from the mechanical thread, armor and cable selections.
| Attribute | 330909-00-16-10-02-00 |
|---|---|
| Brand | Bently Nevada |
| Product name | 3300 XL NSv armored proximity probe |
| Probe base | 330909, with armor |
| Case thread | 3/8-24 UNF-2A |
| Unthreaded length | 0.0 in |
| Overall case length | 1.6 in |
| Total length | 1.0 m |
| Cable | 75 Ω integral cable with armor |
| Connector | Miniature coaxial ClickLoc, standard cable |
| Connector protector | Not included |
| System linear range | 1.5 mm |
| Recommended gap | 1.0 mm |
| System scale factor | 7.87 V/mm |
| Field wiring limit | 305 m from Proximitor Sensor to monitor |
| Agency option | 00, no approvals |
The armored section strengthens the integral lead, but the electrical path still follows the same probe–extension–Proximitor sequence.
The metal armor surrounds the integral cable outside the threaded case. It protects that cable section but is not the signal conductor.
The center and outer conductors carry the probe circuit to the ClickLoc interface. The armor remains mechanically separate from the connector contact roles.
Option 02 ends in the standard ClickLoc without a fitted protector, so environmental treatment of the mating point must be identified separately.
The recommended gap is a starting point that places the target within the system’s calibrated region.
Shaft motion changes the distance to the probe face and therefore changes the coil’s interaction with the conductive target.
The NSv Proximitor Sensor turns that electrical change into the published 7.87 V/mm output relationship over the linear range.
The Proximitor output travels through three-conductor shielded field wiring to the monitor; this run can extend to 305 m under the stated wiring conditions.
No. The armor on 330909-00-16-10-02-00 is mechanical protection; the probe circuit uses the coaxial conductors and the field wiring shield is handled at the Proximitor-to-monitor connection.
No. The 02 connector field of 330909-00-16-10-02-00 supplies the standard ClickLoc without a connector protector.
330909-00-16-10-02-00 must be paired with the corresponding NSv extension cable and NSv Proximitor Sensor for the intended complete system length.
The 330909 base in 330909-00-16-10-02-00 identifies the 3/8-24 UNF NSv probe with armor around the integral cable.
The final 00 on 330909-00-16-10-02-00 is the no-approval option, so any required hazardous-area marking must not be assumed from the probe family alone.
The 16 field on 330909-00-16-10-02-00 specifies a 1.6 in overall case length; the separate leading 00 field specifies 0.0 in unthreaded length.
Moore Automation Limited supplies industrial control and monitoring components across established automation brands. Enquiries are organized by exact manufacturer code, and the account contact coordinates quotation information, requested documentation and shipment updates without merging nearby model variants.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found