Probe at the target
The 11 mm sensing tip establishes the machine-side electromagnetic field and changes its response as the target moves.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330704-000-060-10-01-00 3300 XL 11 mm M14 × 1 Armored Proximity Probe |
| Item NO. | 2943240 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 330704-000-060-10-01-00 is an M14 × 1 armored proximity probe in the 3300 XL 11 mm proximity transducer system. It forms the machine-side sensing element: the probe observes a conductive target, the integral lead connects into the 11 mm extension-cable path, and the matched Proximitor Sensor converts the probe response into a voltage for the monitor.
The metric mechanics of 330704-000-060-10-01-00 provide 0 mm unthreaded length and a 60 mm case. Its 10 field gives a 1.0 m total probe length, and connector option 01 combines standard cable with a miniature coaxial ClickLoc and connector protector; the armored cable and the removable protector therefore serve different mechanical boundaries.
As part of the complete 11 mm system, 330704-000-060-10-01-00 works across the published 4.0 mm linear range with a 2.5 mm recommended gap and 3.94 V/mm nominal scale factor. The final 00 field specifies no agency approvals and must not be replaced by a family-level approval assumption.
| Attribute | 330704-000-060-10-01-00 |
|---|---|
| Brand | Bently Nevada |
| Product name | 3300 XL 11 mm armored proximity probe |
| Probe base | 330704, M14 × 1 with armor |
| Unthreaded length | 0 mm |
| Overall case length | 60 mm |
| Total length | 1.0 m |
| Connector cable | Standard cable |
| Connector | Miniature coaxial ClickLoc |
| Connector protector | Included with option 01 |
| System linear range | 4.0 mm, approximately 0.5 to 4.5 mm |
| Recommended gap | 2.5 mm |
| System scale factor | 3.94 V/mm (100 mV/mil) |
| Field wiring limit | 305 m |
| Agency option | 00, no approvals |
The wider linear range is a system property created by the matched probe, extension cable and Proximitor Sensor.
The 11 mm sensing tip establishes the machine-side electromagnetic field and changes its response as the target moves.
The 1 m integral lead is only part of the calibrated system. The selected extension cable completes the length expected by the Proximitor Sensor.
The Proximitor Sensor produces the gap-proportional output; shielded field wiring then carries that voltage to the monitoring input.
The probe’s option fields define two separate forms of protection around the cable and connection.
Armor supports the cable route leaving the probe case and terminates before the miniature coaxial interface.
Option 01 adds the connector protector around the ClickLoc mating area; it does not replace correct coupling of the connector.
The 60 mm threaded case remains the dimension used to position the probe while the cable and connector continue beyond it.
The 330704 base identifies 330704-000-060-10-01-00 as the M14 × 1 11 mm probe with armor.
No. The 1 m field in 330704-000-060-10-01-00 is combined with the correct 11 mm extension cable and Proximitor Sensor to form the calibrated system length.
On 330704-000-060-10-01-00, 000 is a 0 mm unthreaded length and 060 is a 60 mm overall case length.
The matched 11 mm system used with 330704-000-060-10-01-00 has a 2.5 mm recommended gap inside its approximately 0.5–4.5 mm linear range.
Yes. Connector option 01 on 330704-000-060-10-01-00 supplies standard cable, a ClickLoc connector and a connector protector.
The final 00 on 330704-000-060-10-01-00 denotes no agency approvals, so the exact label must be checked against the installation requirement.
Moore Automation Limited supports enquiries for PLC, DCS, drive and machinery-monitoring components. The enquiry team records the exact model, the requested quantity and any documentation need before commercial processing, keeping technical identity separate from pricing and delivery information.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found