Target sensing
The 8 mm tip of Bently Nevada 330106-05-30-10-02-IN converts the conductive target gap into a changing probe response.
Bently Nevada · Machinery Monitoring HardwareMoore Automation · Technical Record
Bently Nevada · 3300 XL 8 mm Reverse Mount Proximity Probe
Bently Nevada 330106-05-30-10-02-IN
| 3300 XL 8 mm Reverse Mount Proximity Probe
M10 × 1 REVERSE MOUNT · 1.0 M STANDARD CLICKLOC · IN RECORD
Complete model · 330106-05-30-10-02-IN
01
Model Overview
Bently Nevada 330106-05-30-10-02-IN is a 3300 XL 8 mm reverse-mount proximity probe with an M10 × 1 threaded execution. The supplied identifier preserves the 05, 30, 10, 02 and IN fields without silently converting the final regional record.
In the 3300 XL 8 mm chain, Bently Nevada 330106-05-30-10-02-IN faces the machine target from the reverse-mount side and carries the gap-dependent response through its 1.0 m standard ClickLoc cable to the matched extension and Proximitor Sensor.
The 8 mm probe, selected case and unthreaded fields on Bently Nevada 330106-05-30-10-02-IN define the mechanical reach. The 02 connector field identifies the miniature ClickLoc path, while IN remains visible as the supplied exact suffix.
02
Technical Specifications
The complete 330106-05-30-10-02-IN model record is kept in the technical data so its configuration fields can be checked without removing the exact identifier.
- Brand
- Bently Nevada
- Complete model
- 330106-05-30-10-02-IN
- Product type
- 3300 XL 8 mm reverse mount probe
- System family
- 3300 XL 8 mm Transducer System
- Base probe
- 330106
- Thread
- M10 × 1
- Mount execution
- Reverse mount
- Unthreaded field
- 05 retained from supplied string
- Case field
- 30 retained from supplied string
- Total length
- 10 = 1.0 m
- Connector/cable
- 02 = miniature ClickLoc, standard cable
- Final suffix
- IN retained exactly
- Probe diameter
- 8 mm
- Linear range
- 2.0 mm (80 mils)
- Scale factor
- 7.87 V/mm (200 mV/mil)
- Cable
- 75 Ω FEP triaxial
- Bend radius
- 25.4 mm minimum
- Temperature
- −52 to +177 °C standard probe family
- Target reference
- AISI 4140 steel
- System matching
- Probe, extension and Proximitor Sensor matched by length
03
Product Functions
Bently Nevada 330106-05-30-10-02-IN performs the probe stage of an 8 mm eddy-current measurement chain from the reverse-mount position.
Cable transfer
The 1.0 m standard cable carries the response through the miniature ClickLoc connector without becoming the monitor output itself.
Proximitor conditioning
The matched Proximitor Sensor excites Bently Nevada 330106-05-30-10-02-IN and supplies the conditioned voltage to the monitor.
04
Installation Highlights
The reverse-mount geometry of Bently Nevada 330106-05-30-10-02-IN sets the mounting direction, target clearance and cable route for the 3300 XL 8 mm system.
Reverse mounting
The M10 × 1 case is installed from the reverse-mount side so the 8 mm tip reaches the conductive target through the prepared machine geometry.
Cable bend
Keep the standard triaxial cable above its 25.4 mm minimum bend radius when routing Bently Nevada 330106-05-30-10-02-IN.
Suffix record
The IN ending remains attached to Bently Nevada 330106-05-30-10-02-IN because the supplied regional/approval record is not interchangeable with an assumed 00 or 05 field.
05
Common Questions
Why can a reverse-mounted Bently Nevada 330106-05-30-10-02-IN probe read unstable?
Check that the reverse-mount shoulder, M10 × 1 thread and target clearance are all seated as intended for Bently Nevada 330106-05-30-10-02-IN. A mounting direction error changes the probe-to-target geometry before the signal reaches the Proximitor Sensor.
What cable issue can interrupt Bently Nevada 330106-05-30-10-02-IN?
Bently Nevada 330106-05-30-10-02-IN uses a 1.0 m standard ClickLoc cable. Inspect the miniature connector and keep the triaxial cable above its 25.4 mm minimum bend radius so the signal path is not stressed at the reverse-mount exit.
Why does the IN ending matter on Bently Nevada 330106-05-30-10-02-IN?
IN is part of the exact Bently Nevada 330106-05-30-10-02-IN record. Keep it visible rather than inferring another approval or regional field, because the complete suffix is used to identify the supplied probe execution.
How can a customer separate a probe fault from a monitor fault on Bently Nevada 330106-05-30-10-02-IN?
Check the target gap at Bently Nevada 330106-05-30-10-02-IN, then verify the 1.0 m cable, extension and Proximitor Sensor in sequence. The probe provides a gap-dependent response; the monitor receives a conditioned signal only after the rest of the chain is healthy.
What does the 10 field change on Bently Nevada 330106-05-30-10-02-IN?
The 10 field on Bently Nevada 330106-05-30-10-02-IN selects the 1.0 m total cable length. Confirm the extension and Proximitor Sensor are calibrated for that complete electrical length.
What installation clearance is important for Bently Nevada 330106-05-30-10-02-IN?
Leave the reverse-mount side, threaded body and cable exit clear for Bently Nevada 330106-05-30-10-02-IN. The 8 mm tip must face the conductive target without the housing or cable being forced into the moving machine envelope.
06
Reverse Mount Record
Moore Automation
Moore Automation supports industrial automation, monitoring and instrumentation enquiries with complete model records and coordinated supply information.
The requested 330106-05-30-10-02-IN record can stay linked to quantities, drawings and shipment details during the enquiry.
The complete 330106-05-30-10-02-IN string stays visible in the enquiry.
Moore Automation handles automation, monitoring and instrumentation records.
Quantities, drawings and shipment details remain tied to the model record.
07
No related record found