Common sensing circuit
Both model strings use the 330102 armored 3/8-24 UNF base and a 1 m integral lead feeding a standard ClickLoc connection.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330102-10-45-10-02-05 / 330102-00-36-10-02-05 3300 XL 8 mm 3/8-24 UNF Armored Proximity Probes |
| Item NO. | 2943241 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 330102-10-45-10-02-05 and 330102-00-36-10-02-05 are armored 3/8-24 UNF proximity probes for the 3300 XL 8 mm transducer system. Each probe senses target position at the machine, passes the coil response through its integral cable and ClickLoc connection, and operates with the matching extension cable and Proximitor Sensor that provide the monitor-level voltage.
The mechanical reach is not shared: 330102-10-45-10-02-05 combines a 1.0 in unthreaded section with a 4.5 in case, while 330102-00-36-10-02-05 combines 0.0 in with a 3.6 in case. Both retain a 1.0 m total length, standard ClickLoc cable without a protector, armored lead construction and the -05 multiple-approval selection.
Within the complete 8 mm system, 330102-10-45-10-02-05 and 330102-00-36-10-02-05 share a nominal 7.87 V/mm scale factor, a 2.0 mm linear range and a 1.27 mm recommended gap. Those electrical facts do not remove the need to preserve each full mechanical code when the mounting depth is recorded.
| Attribute | 330102-10-45-10-02-05 | 330102-00-36-10-02-05 |
|---|---|---|
| Brand | Bently Nevada | |
| Product name | 3300 XL 8 mm armored proximity probe | |
| Probe base | 330102, 3/8-24 UNF with armor | |
| Unthreaded length | 1.0 in | 0.0 in |
| Overall case length | 4.5 in | 3.6 in |
| Total length | 1.0 m | |
| Connector | Miniature coaxial ClickLoc, standard cable | |
| Connector protector | Not included in option 02 | |
| Agency option | 05, multiple approvals | |
| System linear range | 2.0 mm, approximately 0.25 to 2.3 mm | |
| Recommended gap | 1.27 mm | |
| System scale factor | 7.87 V/mm | |
| Probe cable | 75 Ω triaxial, FEP insulated | |
| Field wiring limit | 305 m | |
The two probes connect to the same type of 8 mm electrical chain, but their installed geometry is not interchangeable.
Both model strings use the 330102 armored 3/8-24 UNF base and a 1 m integral lead feeding a standard ClickLoc connection.
The 10-45 geometry places 1.0 in ahead of the threaded region and extends the full case to 4.5 in.
The 00-36 geometry has no specified unthreaded section and uses a 3.6 in case, changing the physical mounting envelope.
The probe lead, extension cable and Proximitor calibration must be selected as one measurement chain.
The 10 total-length field describes each probe and its integral cable; it does not identify the length of the extension cable.
The corresponding 8 mm Proximitor Sensor excites the probe and converts the returned response to the 7.87 V/mm output.
Setting the target near 1.27 mm places either probe inside the 0.25–2.3 mm published linear range before monitor scaling is checked.
330102-10-45-10-02-05 and 330102-00-36-10-02-05 both use the 1.27 mm recommended gap, but their different case geometries must first be mounted at the correct physical depth.
The final 05 orders multiple approvals on 330102-10-45-10-02-05 and 330102-00-36-10-02-05; each supplied label remains the authority for the markings present.
330102-10-45-10-02-05 has a 1.0 in unthreaded length and 4.5 in case; 330102-00-36-10-02-05 has 0.0 in unthreaded length and a 3.6 in case.
For 330102-10-45-10-02-05 and 330102-00-36-10-02-05, confirm that the probe lead plus extension cable matches the Proximitor Sensor system-length selection.
No. The 02 field on both 330102-10-45-10-02-05 and 330102-00-36-10-02-05 supplies the standard ClickLoc without a protector.
Yes. Both 330102-10-45-10-02-05 and 330102-00-36-10-02-05 use the armored 330102 base with a 3/8-24 UNF-2A case thread.
Moore Automation Limited keeps paired-model enquiries on separate line items even when the products share a series. Full suffixes, quantities and requested documents remain attached to their respective rows, while one account contact coordinates quotation and delivery communication.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found