Additional I/O
20F11ND022AA0NNNNN can add analog and digital I/O through supported PowerFlex 750-Series option cards.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Allen-Bradley 20F11ND022AA0NNNNN PowerFlex 753 AC Drive |
| Item NO. | 2909802 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | AB |
| Brand | ALLEN-BRADLEY |
| Creation Time | 2026-09-20 |
480 V DRIVE · 22 A NORMAL DUTY
A discontinued Frame 2 drive for 480 V-class machine control.
Allen-Bradley 20F11ND022AA0NNNNN is an air-cooled PowerFlex 753 AC drive with embedded I/O. It is the 480 V AC three-phase, Frame 2 configuration and provides a 22 A output rating for the PowerFlex 753 drive system.
The 20F11ND022AA0NNNNN ratings are 15 HP at normal duty and 10 HP at heavy duty. Its base hardware combines an AC input with DC terminals, an IP20/IP00 open enclosure, EMC filtering with the CM jumper removed, a dynamic-brake transistor and a blank HIM position.
Allen-Bradley 20F11ND022AA0NNNNN was discontinued on June 30, 2024. Its direct replacement is 20F11ND022JA0NNNNN.
| Technical Item | 20F11ND022AA0NNNNN |
|---|---|
| Brand | Allen-Bradley |
| Product Type | PowerFlex 753 AC drive |
| Brand Country | United States |
| Input Voltage | 480 V AC, three phase |
| Normal-Duty Output | 22 A / 15 HP |
| Heavy-Duty Output | 14 A / 10 HP |
| Frame | 2 |
| Enclosure | IP20 / IP00 open type |
| Cooling | Forced air |
| Input / DC Bus | AC input with DC terminals |
| Dynamic Brake Transistor | Included |
| EMC Configuration | Filtered; common-mode jumper removed |
| Human Interface Module | Not included |
| Lifecycle | Discontinued 30 June 2024 |
| Direct Replacement | 20F11ND022JA0NNNNN |
20F11ND022AA0NNNNN can add analog and digital I/O through supported PowerFlex 750-Series option cards.
The drive uses a slot-based architecture for compatible hardware-control options.
Unlike the built-in Ethernet arrangement of the PowerFlex 755, network communication is added to a PowerFlex 753 through a supported communication module.
20F11ND022AA0NNNNN has no safety option identified in its NNNNN option positions, while the PowerFlex 753 architecture supports designated safety option cards.
Use 22 A / 15 HP only for a normal-duty load profile. If the process needs the heavy-duty overload curve, size from 14 A / 10 HP.
This is a PowerFlex 753. The 753 and 755 families differ in control architecture and option strategy, so the family prefix must not be treated as interchangeable.
No HIM is included in this configuration. Confirm the separate HIM or software method needed for commissioning and maintenance.
It includes a dynamic-brake transistor. The resistor and its thermal protection must still be selected for the application.
Rockwell Automation lists 20F11ND022JA0NNNNN as the direct replacement. Verify firmware, parameters and fitted options before installation.
Do not assume that. Compare firmware revisions, option modules, scaling and safety-related behavior, then commission under controlled conditions.
Obsolete Parts Support
Moore Automation supports exact legacy sourcing while recording the current replacement reference for future planning.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found