Allen-Bradley - Stratix 5200
Allen-Bradley 1783-CMS6B Stratix 5200 Managed Ethernet Switch
DIN-rail managed industrial switch with four 100 Mb copper ports and two 100/1000 Mb SFP slots.
Product Profile
Allen-Bradley 1783-CMS6B is a Stratix 5200 managed Ethernet switch with four 100 Mb copper ports and two 100/1000 Mb SFP slots. The base-firmware model is intended for a star network and is specified without routing, Power over Ethernet, or integrated Device Level Ring capability.
For an industrial cabinet, 1783-CMS6B is a DIN-rail switch with an IP30 environment rating and a -40 to 60 °C operating-temperature range. Its 12 to 48 V DC input is listed at 1.6 A, so the cabinet supply and protective arrangement must be reviewed before commissioning.
Port mapping is important during commissioning. The Stratix 5200 manual identifies switch labels 1 through 6; its configuration-file notation maps ports 1 and 2 as Gi1/1 and Gi1/2, while ports 3 through 6 are Fa1/3 through Fa1/6. This avoids treating every physical connector as the same speed class.
Technical Specifications
| Specification | 1783-CMS6B |
|---|---|
| Brand | Allen-Bradley |
| Country of origin | United States of America |
| Product family | Stratix 5200 |
| Switch type | Managed switch; base firmware |
| Copper ports | Four 100 Mb copper ports |
| Fiber uplinks | Two 100/1000 Mb SFP slots |
| Network arrangement | Star |
| Routing | No |
| Power over Ethernet | No |
| Integrated DLR | No |
| Mounting | DIN rail |
| Environmental rating | IP30 |
| Operating temperature | -40 to 60 °C (-40 to 140 °F) |
| Input power | 12 to 48 V DC, 1.6 A |
| Alarm relay rating | 30 V DC at 1 A or 60 V DC at 0.5 A |
DIN-rail installation procedure
Installation steps
DIN-rail installation procedure
First, mount 1783-CMS6B vertically on a DIN rail within the end-user supplied enclosure. The device is an open-type switch, so its installation position, enclosure and cable entry must be set before network or power connections are made.
Next, connect the 12 to 48 V DC supply, identify each copper and SFP connection from the front port labels, then verify the cabinet temperature stays within the published -40 to 60 °C range. Use the adjacent official engineering drawing to reserve the device footprint and confirm the DIN mating face.
- Mount vertically on DIN rail
- Wire the 12 to 48 V DC supply
- Identify copper and SFP ports before commissioning
Port roles and network boundaries
Key features
Port roles and network boundaries
The four copper interfaces are 100 Mb ports; the two SFP positions are the 100/1000 Mb uplink-capable interfaces. This split should be checked before a network design assumes six equivalent Gigabit copper connections.
1783-CMS6B uses base firmware for a managed star-network switch. The official selection data lists no routing, no PoE and no integrated DLR, so designs requiring those functions need a different hardware and firmware selection rather than an assumption based on the Stratix family name.
- 4 x 100 Mb copper ports
- 2 x 100/1000 Mb SFP slots
- No routing, PoE or integrated DLR
Frequently Asked Questions
For 1783-CMS6B, a cabinet drawing calls for six copper Gigabit devices; how does 1783-CMS6B change that port plan?
The copper plan must be revised: 1783-CMS6B has four 100 Mb copper ports, while its two 100/1000 Mb positions are SFP slots rather than additional copper ports.
A maintenance team comparing 1783-CMS6B needs to know: which ports should be reserved when 1783-CMS6B needs fiber uplinks?
The two 100/1000 Mb SFP slots on 1783-CMS6B are the documented fiber-capable positions; the other four interfaces are listed as 100 Mb copper ports.
Before commissioning 1783-CMS6B, can 1783-CMS6B be selected when the machine network needs routing, PoE, or integrated DLR?
No. The official selection data identifies 1783-CMS6B as a base-firmware, star-network switch without routing, Power over Ethernet, or integrated DLR.
In a retrofit that specifies 1783-CMS6B, what cabinet condition should be checked before powering 1783-CMS6B in a hot location?
The cabinet review must keep 1783-CMS6B within its published -40 to 60 °C operating range and provide its specified 12 to 48 V DC, 1.6 A input.
During selection of 1783-CMS6B, how should 1783-CMS6B be positioned in the control enclosure?
Install 1783-CMS6B vertically on a DIN rail inside the end-user supplied enclosure; it is an open-type device rather than a freestanding enclosure-rated switch.
With 1783-CMS6B under review, which alarm-contact limit applies when 1783-CMS6B is wired into a monitoring circuit?
For 1783-CMS6B, the published alarm relay rating is 30 V DC at 1 A or 60 V DC at 0.5 A; the monitoring circuit must stay within the applicable rating.
Moore Automation
Moore Automation
Network-installation enquiry review
For an industrial network enquiry, Moore Automation can start with the exact switch model, intended copper and SFP connections, power supply and cabinet environment. This keeps the discussion tied to the installed network role.
- Original products
- Fast delivery
- 1-year warranty
- 12-hour online response
Related Product List
- Siemens 3TK2810-0GA02
- Siemens 3RT2037-1AD00
- Siemens 3VA1132-5EE36-0AA0
- Siemens 3RT2036-1NB34
- Siemens 3RT2028-1AB04
- Siemens 3TK2850-2AL20
- Siemens 3NJ4103-3BF01
- Siemens 3RU2136-4HB0
- Omron CJ1W-TC102
- Omron CP1L-M60DR-D
- Omron CP1L-EM40DT-D
- Omron OM2000N
- Omron CJ1W-PTS52
- Omron CP1L-M60DT1-D
- Omron CJ1W-TC001
- Omron CJ1W-CT021
- Mitsubishi Electric AJ71AP21
- Mitsubishi Electric FX3U-32MR/ES-A
- Mitsubishi Electric FR-A240E-1.5K-EC
- Mitsubishi Electric FR-A024-0.4K
- Mitsubishi Electric FR-A540-2.2K
- Mitsubishi Electric FX2N-64MR-ES/UL
- Mitsubishi Electric MR-J10A1-M
- Mitsubishi Electric FX3G-40MR/ES
- Yaskawa SGD7S-120A00A008
- Yaskawa SGDA-08APP
- Yaskawa SGDA-04AP
- Yaskawa CIMR-V7CC44P0
- Yaskawa SGDV-1R6AE1A
- Yaskawa CIMR-J7ACB0P1
- Yaskawa CIMR-V7AZ40P70
- Yaskawa SGDA-02BPY105
- Danfoss 131B0026
- Danfoss FC939970-B
- Danfoss 131B0561
- Danfoss 131B3736
- Danfoss FC200577C
- Danfoss FC-301P1K5T4E20H1
- Danfoss FC600S
- Allen-Bradley 150-F43NBDD
- Allen-Bradley 150-F201NBDB
- Allen-Bradley 150-F361NBR
- Allen-Bradley 150-F60NBRD
- Allen-Bradley 150-F108NBDD
- Allen-Bradley 150-F201NBDD
- Allen-Bradley 150-F361NBRB
- GE IS200ECTBG1A
- GE DS200SDCIG1AFB
- GE DS200DCFBG1BLC
- GE IS200EACFG2ABB
- GE DS200FSAAG2A
- GE IS200TBCIH1BCE
- GE DS200TCTGG1AFF
- B&R X20CP1483
- B&R X20CP1686X
- B&R X20CP3585
- B&R AB7000-C
- B&R 5AP1130.185C-000
- B&R 3CP340.60-2
- B&R BWU3274
No related record found