YokogawaProSafe-RS FIO

Yokogawa SDV541-S5C/B4S10 16-Channel 24 V DC Safety Digital Output Module

Name: Yokogawa SDV541-S5C/B4S10 16-Channel 24 V DC Safety Digital Output Module
Brand: YOKOGAWA
SKU: 2932022
Price: 1 USD
Availability: InStock

Product identity16 DO

Product identity

Product Details

Yokogawa SDV541-S5C/B4S10 is a 16-channel 24 V DC digital output module with module isolation for ProSafe-RS FIO. Its current-source outputs are specified for 0.2 A per line and 3.2 A total under the standard rating, with field wiring diagnostics integrated into the module.

The S5C code in Yokogawa SDV541-S5C/B4S10 identifies the standard type, pressure-clamp or MIL-cable connection without explosion protection, and the high-density -20 to +70 °C installation option. High-density operation introduces channel and current derating that must be applied to the cabinet load plan.

Option /B4S10 on Yokogawa SDV541-S5C/B4S10 supplies the STB4S-10 pressure-clamp terminal block for digital outputs with surge absorber. Module output limits, external 24 V DC supply, terminal-block option and connected load resistance therefore form one circuit specification.

Yokogawa manual crop showing SDV541 external dimensions for pressure-clamp and cable-adapter forms

Technical record

Specifications Overview

Specification	SDV541-S5C/B4S10
Brand	Yokogawa
Product Name	16-Channel 24 V DC Safety Digital Output Module
Country	Japan
System family	ProSafe-RS / FIO
Output channels	16, module isolation
Output voltage	24 V DC
Output format	Current source
Maximum load current	0.2 A per output; 3.2 A total
Minimum load current	35 mA
Load resistance	120 to 685 Ω
Output response time	30 ms maximum
External power supply	24 V DC +20 % / -10 %; 3.4 A capacity
Current consumption	300 mA at 5 V DC; 150 mA at 24 V DC maximum
Weight	Approx. 0.29 kg with pressure clamp/MIL cable
Connection option	/B4S10: STB4S-10 surge-absorbing output terminal block

Sixteen current-source channels

Output Load Management

The SDV541 output rating is applied to the complete field circuit, including load resistance, inrush behavior and external supply capacity.

Per-channel current

The nominal maximum is 0.2 A per channel, while the minimum load is 35 mA. Connected devices are checked across their operating and fault states.

Total load budget

All active channels share the 3.2 A total output limit and the external supply rating. Simultaneous demand is calculated rather than estimated from average load.

Voltage drop path

Cable, adapter and terminal resistance reduce field voltage at the load. Long runs are evaluated with the connected current and the lower supply tolerance.

Suffix C derating

High-Density Thermal Limits

The high-density C option allows the specified temperature range only when channel count and current follow Yokogawa limits.

0.2 A operation

At 0.2 A per channel, all sixteen outputs cannot be loaded at the highest ambient. The allowed active-channel count decreases as temperature rises.

0.15 A operation

Reducing each channel to 0.15 A permits all sixteen outputs through the high-density temperature range stated for the module.

Surge terminal block

The /B4S10 STB4S-10 terminal block includes surge absorption, but it does not remove load-current, heat or external-supply calculations.

Practical checks

Product Q&A

Why do some Yokogawa SDV541-S5C/B4S10 channels need derating at high temperature?

Yokogawa SDV541-S5C/B4S10 carries the high-density C suffix. At 0.2 A per channel, the allowed active-channel count falls with ambient temperature; use the documented channel/current table in the cabinet calculation.

What should be checked when a Yokogawa SDV541-S5C/B4S10 output turns on but the load does not pick up?

Measure the Yokogawa SDV541-S5C/B4S10 field supply and load voltage under current, then include cable and terminal resistance. Confirm the load remains within 120 to 685 Ω and above the 35 mA minimum.

Does /B4S10 increase the current rating of Yokogawa SDV541-S5C/B4S10?

No. /B4S10 adds the STB4S-10 surge-absorbing pressure-clamp terminal block to Yokogawa SDV541-S5C/B4S10; the module load, total current and thermal limits remain in force.

How should inductive loads be handled on Yokogawa SDV541-S5C/B4S10?

For Yokogawa SDV541-S5C/B4S10, verify coil current, release behavior, inrush and the approved surge-suppression arrangement. Do not treat the terminal-block surge absorber as a substitute for the load design.

Why can output diagnostics change when Yokogawa SDV541-S5C/B4S10 is used with a relay board?

Certain relay-board arrangements require specific Yokogawa SDV541-S5C/B4S10 style/firmware levels and may require disconnection or pulse diagnostics to be disabled. Check the selected board and revision before enabling diagnostics.

What should be measured before exchanging Yokogawa SDV541-S5C/B4S10?

Record Yokogawa SDV541-S5C/B4S10 channel states, diagnostic messages, external 24 V DC, load currents, terminal-block identity and ambient condition so a field-load problem is not mistaken for a module failure.

Moore Automation

About Moore Automation

Moore Automation

https://www.mvme.cn

Moore Automation supplies industrial automation components across control, safety, drive and measurement systems. Enquiries are recorded with full suffixes and connection options so a module request remains tied to its terminal hardware.

Commercial coordination can include stock evidence, documentation requests, packing details and shipment follow-up, giving the customer a consistent record for both the module and its accessories.

Full suffix preservationTerminal-option matchingStock evidence handlingOrder-document continuity

Mixed-brand selection

Recommended Models

Allen-Bradley 1794-IF2XOF2I

B&R X20CP0484

Yaskawa SGDH-30DE-OY

WAGO 280-572

Beckhoff AX5103-0000

Foxboro FBM241C

Bosch Rexroth HMS01.1N-W0150-A-07-NNNN

HIMA F7131

Lenze EVS9321-EP

Emerson 1C31116G03

Vibro-Meter MPC4 200-510-071-113

Yokogawa ANR10D

ProSoft PLX31-EIP-MBS4

TRICONEX 8312

Motorola MVME162-512A1

SICK GL10-IR/32/40a/98a

Phoenix Contact QUINT-PS-100-240AC/12DC/10

SEW-EURODRIVE MDX61B0005-5A3-4-0T

Triconex 3723X

Danfoss 131B0026

ICS Triplex T8290C

Woodward 9907-018

Moxa EDS-2005-EL

Pepperl+Fuchs UB120-12GM-E5-V1

Festo MPPES31410420

FANUC A06B-0780-B100#3000

GE Fanuc IC670GBI102

ifm PN3004

Knick P4840P

Rockwell Drives 80190-220-01-R

Siemens 6ES7195-7KF00-0XA0

ABB 3HAC043072-003

GE IC693APU301R

Schneider Electric TSXDEY16A2

Rockwell Automation 1756-L83EP

Omron C200H-OD219

Bently Nevada 330101-04-36-05-02-05

Honeywell CC-GAIX11

Mitsubishi Electric FR-A840-00470-2-60

Allen-Bradley 1794-TB3T

B&R X20CP0482

Yaskawa JUSP-NS115

WAGO 753-666/000-003

Beckhoff EL3602-0010

Foxboro FBM203C

Bosch Rexroth HMS01.1N-W0054-A-07-NNNN

HIMA F3330

Lenze EVS9323-ES-E

Emerson KJ1501X1-BC2

Vibro-Meter IOC4T 200-560-000-111

Yokogawa ANB10D-425-CU2N

ProSoft PLX31-PND-MBS4

TRICONEX 3006

Motorola MVME162-723

SICK CLV622-1000S51

Phoenix Contact QUINT-PS-230AC

SEW-EURODRIVE MDX61B0220-503-4-00

Triconex 4701X

Danfoss 131B0514

ICS Triplex T8431C

Direct enquiry

Enquiry Details

CompanyMoore Automation

Sales ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Product Name	Yokogawa SDV541-S5C/B4S10 16-Channel 24 V DC Safety Digital Output Module
Item NO.	2932022
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	YOKOGAWA
Brand	YOKOGAWA
Creation Time	2026-11-12

Yokogawa SDV541-S5C/B4S10 16-Channel 24 V DC Safety Digital Output Module Item NO.: 2932022

Yokogawa SDV541-S5C/B4S10 16-Channel 24 V DC Safety Digital Output Module

Product Details

Specifications Overview

Output Load Management

Per-channel current

Total load budget

Voltage drop path

High-Density Thermal Limits

0.2 A operation

0.15 A operation

Surge terminal block

Product Q&A

About Moore Automation

Moore Automation

Recommended Models

Enquiry Details

You May Also Like

Recently Viewed