How many field channels does Woodward 5466-332 actually provide?

Woodward 5466-332 provides 24 analog 4–20 mA inputs and 8 analog 4–20 mA outputs. Check both the module channel map and the FTM labels before assigning a field wire.

Where are the two cables from Woodward 5466-332 terminated?

The module uses two high-density analog/discrete cables to two 24/8 Analog FTMs. Do not route both cables to one FTM without matching the chassis and application wiring plan.

What should be checked if several Woodward 5466-332 channels read incorrectly?

Check the common reference, FTM termination and the channel’s 200 ohm input path first. A problem across several channels can involve the shared FTM or cable rather than one field transmitter.

Can a 4–20 mA transducer use loop power from Woodward 5466-332?

Each analog input can power its own 4–20 mA transducer, but the loop-power limit is 0.32 A per 12 inputs on the same FTM. Sum the connected loop loads before enabling additional transmitters.

How should channels 23 and 24 of Woodward 5466-332 be treated?

Channels 23 and 24 use the 5 ms input filter while channels 01–22 use the 10 ms filter. Keep that difference in the signal-response review instead of assuming every input has the same filter.

Can Woodward 5466-332 be placed in a high-noise cabinet without checking the signal path?

No. The manual notes that analog readback accuracy can be affected by high electrical noise. Check grounding, cable routing and the FTM connection before changing the module.