Welcome to Moore Automation Limited
|
Copy and share this link on social network or send it to your friends
Copy| Product Name | Siemens 6ED1052-1HB08-0BA2 | LOGO! 24 V AC/DC Relay Base Module |
| Item NO. | 2927536 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | SIEMENS |
| Brand | SIEMENS |
| Creation Time | 2026-10-27 |
Siemens · Industrial Automation
Eight digital inputs and four relay outputs in the LOGO! 8.4 platform.
Siemens 6ED1052-1HB08-0BA2 is the LOGO! 24RCE base module for 24 V AC/DC control power. It provides eight digital inputs, four relay outputs, a local display and keys, and the Ethernet connection used by the LOGO! 8.4 engineering and communication functions.
In a machine circuit, Siemens 6ED1052-1HB08-0BA2 reads the eight 24 V field states into the user program and switches externally supplied loads through its four relay contacts. Because the contact side is separate from the input supply, the load voltage, protection and return path must be documented independently.
Expansion and network operation extend Siemens 6ED1052-1HB08-0BA2 beyond its base I/O. The exact expansion order, IP settings, program version and local-display pages belong to the device record and should be retained together during commissioning or replacement.
| Brand | Siemens |
|---|---|
| Model | 6ED1052-1HB08-0BA2 |
| Product Name | LOGO! 24RCE |
| Country | Germany |
| Generation | LOGO! 8.4 |
| Supply | 24 V AC/DC; 20.4 to 26.4 V AC or 20.4 to 28.8 V DC |
| Digital Inputs | 8 |
| Relay Outputs | 4 |
| Program Capacity | 400 function blocks |
| Ethernet | Integrated |
| Local Display / Keys | Yes |
|---|---|
| Programming | LOGO! Soft Comfort V8.4 or later |
| Power Consumption | 60 to 185 mA AC; 25 to 100 mA DC |
| Power Loss | 1.4 to 4.4 W AC; 0.6 to 2.4 W DC |
| RTC Backup / Accuracy | Typically 20 days; ±2 s/day |
| Relay Contact Rating | Up to 10 A per relay; 240 V AC/DC rated |
| Maximum Surge Current | 30 A |
| Module Width | 4 spacing units |
| Dimensions (W × H × D) | 71.5 × 90 × 60 mm |
| Approximate Weight | 240 g |
Siemens 6ED1052-1HB08-0BA2 links 24 V field wiring, relay loads, Ethernet and optional LOGO! expansion modules through one configured base module. Treat the controller, its mixed digital or analog inputs, transistor load supply and Ethernet project as four linked layers during integration.
Assign every Siemens 6ED1052-1HB08-0BA2 terminal to a named field device and keep the relay load supply separate in the drawing. Create a terminal map that identifies which configurable inputs are used as digital, analog or high-speed points, then keep the same assignment in the project tags.
Place supported modules in the documented order and verify their power demand before coupling them to Siemens 6ED1052-1HB08-0BA2. Add expansion modules in their physical left-to-right order and reserve the resulting addresses before copying program blocks from another LOGO! station.
Set the Siemens 6ED1052-1HB08-0BA2 address and communication role before linking other LOGO! or supervisory devices. Prove the communication route by checking the configured IP partner and online device identity before relying on remote status or downloads.
Operate Siemens 6ED1052-1HB08-0BA2 by comparing field state, displayed program state and physical relay-load response at each step. Monitoring should follow the signal from terminal to logic result and finally to the powered load, rather than stopping at the front-panel symbol.
Use the front display and online status to confirm that Siemens 6ED1052-1HB08-0BA2 sees the intended 24 V input. For a questionable input, compare measured voltage, the input indication and the live program value; disagreement between two of these narrows the fault layer.
Monitor timers, counters and interlocks in Siemens 6ED1052-1HB08-0BA2 before forcing an output; the absent output may be a valid program result. Use online block status to locate the permissive, latch or timer that prevents an output, then confirm that the logic belongs to the intended physical channel.
Command the Siemens 6ED1052-1HB08-0BA2 relay and measure the externally supplied load circuit under actual operating conditions. For an active output, measure the field supply and load return under operation and record whether overload protection or wiring, rather than the command bit, interrupted current.
Check whether Siemens 6ED1052-1HB08-0BA2 is supplied and referenced for the selected AC or DC circuit, then measure the input against the documented common.
Verify link state, IP address, subnet and project interface for Siemens 6ED1052-1HB08-0BA2, then rule out an address conflict before changing hardware.
The Siemens 6ED1052-1HB08-0BA2 relay contacts are separately supplied, but the selected load voltage and current must stay within the contact specification and external protection.
Confirm that the project targets Siemens 6ED1052-1HB08-0BA2 and LOGO! 8.4, and verify expansion configuration, network settings and parameter blocks.
Compare the Siemens 6ED1052-1HB08-0BA2 output bit, relay indication, contact voltage and load current at the same time; this separates logic, contact and field-load causes.
Provide the exact Siemens 6ED1052-1HB08-0BA2 article, quantity, program generation, expansion list, supply type, load schedule and destination.
Moore Automation provides a direct enquiry route for industrial automation article review, available documents and order communication.
The service keeps the requested article and quantity together without promising manufacturer authorization, stock or a fixed completion date.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found