GE IC3600TCBA1 SCR Comparator Card
SCR comparator card for legacy GE Mark I and Mark II control equipment.
1Product Description
IC3600TCBA1 is an SCR comparator card in the GE Mark I and Mark II control family. The card is identified as an SCR comparator board and is intended for the comparator function within the associated legacy control arrangement.
As a printed circuit card, it is a board-level replacement item rather than a self-contained controller. Correct replacement depends on the full board identification, the installed rack position and the existing edge or plug connections.
Use the board only in the matching Mark I or Mark II control arrangement. Record the surrounding card positions and cable or terminal locations before removal so that the comparator card is returned to the same control location.
2Technical Specifications
| Technical Item | IC3600TCBA1 |
|---|---|
| Brand | GE |
| Product type | SCR comparator card |
| Country / region | United States |
| Control family | Mark I and Mark II |
| Board designation | SCR-COMP-CARD |
| Component form | Printed circuit card |
| Primary role | SCR comparator function |
| Installation context | Legacy control-card rack |
| Replacement identification | Complete board part number |
| Connection check | Existing rack and connector positions |
3Control Function
SCR comparator role
The card provides the SCR comparator function identified for the Mark I and Mark II control family. It belongs to the board-level control arrangement, where its position and connected interfaces form part of the required configuration.
When tracing a control issue, identify the comparator-card location first and separate it from adjacent control cards. This avoids assigning a rack or connection fault to the wrong board during service work.
4Compatibility & Interoperability
Mark I and Mark II card-rack use
Use the card with the matching GE Mark I or Mark II legacy control system. The part designation identifies an SCR comparator card, not a general-purpose replacement for a different board family.
Before fitting a spare, compare the complete board number, rack position and every connected interface with the removed card. Preserve the established locations so that the replacement remains compatible with the installed control arrangement.
5Product FAQ
How do I identify the correct rack location for IC3600TCBA1?
Record the removed card’s rack position and every connected interface before replacement; the complete board number alone does not record its installed position.
What is the safest way to prepare a spare for IC3600TCBA1?
Confirm the complete card number, Mark I or Mark II control family, board location and the interface arrangement at the machine.
Can IC3600TCBA1 be used in a non-Mark I or Mark II rack?
No general substitution should be assumed. The card is identified for the Mark I and Mark II control family and must match the installed system.
Why should I photograph connections before removing IC3600TCBA1?
A board-level control card can be reinstalled incorrectly if the rack or connected interfaces are not recorded before service work.
What should be checked if the replacement IC3600TCBA1 does not restore operation?
Recheck the complete part number, rack position and every recorded connection before treating the replacement card as the cause.
How can I avoid confusing IC3600TCBA1 with an adjacent control card?
Use the SCR comparator designation and the complete board number, not the general appearance of a legacy printed circuit card.
6Moore Automation
Legacy Control Card Support
Moore Automation supports industrial automation parts for planned maintenance and replacement work. Send the complete part number and quantity with an enquiry.
- Original products
- Fast delivery
- 1-year warranty
- 12-hour online response
No related record found