Welcome to Moore Automation Limited
|
Copy and share this link on social network or send it to your friends
Copy| Product Name | Siemens 6ED1052-1CC08-0BA2 | LOGO! 24 V DC Transistor Base Module |
| Item NO. | 2927537 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | SIEMENS |
| Brand | SIEMENS |
| Creation Time | 2026-10-27 |
Siemens · Industrial Automation
Fast 24 V DC control with eight inputs and four transistor outputs.
Siemens 6ED1052-1CC08-0BA2 is the LOGO! 24CE base module for 24 V DC systems. Its eight digital inputs include four positions that can be assigned as 0 to 10 V analog inputs, while four transistor outputs switch DC loads without relay contacts.
The signal path through Siemens 6ED1052-1CC08-0BA2 depends on input assignment. A mixed-use input wired for analog measurement needs the documented M reference and an analog function in the program; a transistor output needs the correct 24 V load supply, polarity and return.
As a LOGO! 8.4 device, Siemens 6ED1052-1CC08-0BA2 combines its local display with Ethernet, data and web-related functions supported by the configured project. The exact article remains important because relay-output LOGO! modules do not reproduce the same DC switching behavior.
| Brand | Siemens |
|---|---|
| Model | 6ED1052-1CC08-0BA2 |
| Product Name | LOGO! 24CE |
| Country | Germany |
| Generation | LOGO! 8.4 |
| Supply | 24 V DC; permitted 20.4 to 28.8 V DC |
| Digital Inputs | 8; four can serve as 0–10 V AI |
| Transistor Outputs | 4 |
| Program Capacity | 400 function blocks |
| Ethernet | Integrated |
| Local Display / Keys | Yes |
|---|---|
| Programming | LOGO! Soft Comfort V8.4 or later |
| No-Load / Full-Load Current | 25 to 50 mA no-load; up to 1.2 A at full output load |
| Power Loss | 0.6 to 1.2 W |
| High-Speed Inputs | I3 to I6; up to 5 kHz |
| Analog Input Characteristics | I1, I2, I7, I8; 0 to 10 V; 80 kΩ; ±1.5% full scale |
| Transistor Output Behavior | 0.3 A per channel; short-circuit and overload protected |
| Module Width | 4 spacing units |
| Dimensions (W × H × D) | 71.5 × 90 × 60 mm |
| Approximate Weight | 195 g |
Siemens 6ED1052-1CC08-0BA2 acquires binary or selected analog values, executes the LOGO! program and drives four DC transistor outputs. The base module combines discrete control, configurable voltage inputs and protected transistor outputs, so the project must define the role of each terminal before commissioning.
Configure the intended Siemens 6ED1052-1CC08-0BA2 input as digital or 0 to 10 V analog before scaling it in the program. Assign every configurable input to one documented function and use scaling and limits that match the connected sensor instead of treating an analog value as a generic percentage.
Timers, counters, logic blocks and network values in Siemens 6ED1052-1CC08-0BA2 determine the output command rather than direct input-to-output wiring. Build the control sequence so input validation, permissives and output commands can be observed independently during a stopped-machine test.
The four Siemens 6ED1052-1CC08-0BA2 transistor channels switch correctly only with the documented polarity, load supply and return. When a load does not operate, trace the commanded output through its field supply, common return and protection path before changing program logic.
Siemens 6ED1052-1CC08-0BA2 response is shaped by input mode, program cycle and the electrical behavior of its transistor load path. Performance checks should test timing, analog stability and switching behavior in the actual program path without turning the module table into a second specification list.
Route low-level analog wiring for Siemens 6ED1052-1CC08-0BA2 away from switching conductors and use one stable reference potential. Apply known input transitions and compare online timing with the programmed filter or counting function so short pulses are not misdiagnosed as wiring faults.
Check the Siemens 6ED1052-1CC08-0BA2 program cycle and block timing when a fast input event does not produce the expected output duration. For analog channels, use a known reference signal and compare raw value, scaled value and process display while checking shielding and the common reference.
Evaluate steady current and switching frequency for each Siemens 6ED1052-1CC08-0BA2 transistor load; do not apply relay contact assumptions. Cycle each transistor load at the intended operating rate and observe temperature, supply dip and protection response under the real load rather than an unloaded indicator test.
Confirm the selected analog-capable input, M reference and scaling block for Siemens 6ED1052-1CC08-0BA2, then measure the voltage at the terminal.
Check the Siemens 6ED1052-1CC08-0BA2 load supply, polarity, return and field fuse; the logic command does not complete an open external circuit.
Not by output count alone. Siemens 6ED1052-1CC08-0BA2 has 24 V DC transistor outputs, so voltage, polarity and load behavior must match the application.
Inspect analog reference, shielding, routing and programmed hysteresis for Siemens 6ED1052-1CC08-0BA2 before increasing software filtering.
Compare the pulse width with Siemens 6ED1052-1CC08-0BA2 input behavior and program cycle, then use the suitable counting or edge logic where documented.
Save the exact Siemens 6ED1052-1CC08-0BA2 article, project, IP settings, input modes, analog scaling, output loads and expansion order.
Moore Automation keeps complete article references, requested quantities and available technical files in one industrial automation enquiry route.
This organization supports clear follow-up without representing manufacturer authorization, guaranteed stock, fixed delivery or guaranteed technical resolution.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found