PT and CT feedback
Generator voltage and current enter isolation transformers before the resulting low-level signals pass to the controllers.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | GE IS200ESYSH1A ESYS EX2100e System I/O TMR Module |
| Item NO. | 2940239 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | GE |
| Brand | GE |
| Creation Time | 2026-11-17 |
GE IS200ESYSH1A is the H1 ESYS system I/O interface module for a triple-modular-redundant EX2100e excitation control. It concentrates the external exciter interfaces—generator PT and CT feedback, control contacts, customer analog I/O, general-purpose relays and trip outputs—on one module.
Signals entering GE IS200ESYSH1A are separated by function. Isolation transformers receive the generator voltage and current feedback, pluggable screw terminal boards carry customer I/O, and HSLA daughterboards transfer status and commands over high-speed serial links to control sections M1, M2 and C.
The output side of GE IS200ESYSH1A includes four 12-bit analog outputs, four general-purpose Form C relays and two trip relay outputs. The trip path uses 2-of-3 hardware voting, while seven auxiliary contacts and the 52G input are wetted by the module’s 55 V dc contact supply.
| Specification | IS200ESYSH1A |
|---|---|
| Brand | GE |
| Functional acronym | ESYS |
| Product type | EX2100e system I/O interface module |
| Hardware group | H1 |
| Redundancy | TMR |
| Control sections | M1, M2 and C |
| PT inputs | Two three-phase generator voltage inputs |
| CT inputs | Two inputs, 1 A or 5 A |
| Customer analog inputs | Two, selectable 4–20 mA or ±10 V |
| Analog outputs | Four, 12-bit |
| General-purpose outputs | Four Form C relays |
| Trip outputs | Two, 2-of-3 hardware voting |
| Auxiliary inputs | Seven plus dedicated 52G |
| Contact wetting supply | 55 V dc |
| Control interface | HSLA / HSSL |
GE IS200ESYSH1A converts cabinet terminal connections into isolated measurement and control data for the EX2100e controllers.
Generator voltage and current enter isolation transformers before the resulting low-level signals pass to the controllers.
Two customer inputs are jumper-selected for ±10 V or 4–20 mA and sampled by the control system.
Seven auxiliary contacts, 52G status, general-purpose relays and trip relays share the ESYS external I/O boundary.
GE IS200ESYSH1A uses its H1 population to serve three independently controlled sections.
Status and commands are exchanged with M1, M2 and C through the mounted HSLA high-speed serial-link interfaces.
Critical PT and CT feedback can be routed to the three control sections from the same isolated measurement front end.
Two trip relays use 2-of-3 hardware voting so the external lockout command depends on the redundant control decision.
GE IS200ESYSH1A is the TMR ESYS group serving M1, M2 and C. H2 is dual and H3 is simplex, so the suffix defines the redundancy structure.
GE IS200ESYSH1A accepts CT inputs for either 1 A or 5 A secondaries. Verify the connected CT rating and the applicable input configuration before interpreting the current feedback.
GE IS200ESYSH1A transfers status and commands through its HSLA daughterboards and HSSL paths to M1, M2 and C. Trace the affected control section’s serial-link path instead of assuming the shared terminal signal is missing.
GE IS200ESYSH1A drives its two trip relays through 2-of-3 hardware voting. A single section’s request does not by itself satisfy that external trip-output decision.
GE IS200ESYSH1A provides two jumper-selectable analog inputs for 4–20 mA or ±10 V operation; each input configuration must match its wired signal.
GE IS200ESYSH1A wets the seven auxiliary inputs and the dedicated 52G path with its 55 V dc contact supply. Check that wetting path and terminal continuity before treating the dry contact closure as a valid module input.
https://www.mvme.cn
Moore Automation begins support by confirming the manufacturer, complete model, revision, quantity and destination. Questions and attachments stay connected to the same enquiry so the product identity remains clear during commercial communication.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found