GE Fanuc IC610CBL105 Series One I/O Interface Cable
The documented 10 ft (3 m) Series One I/O interface cable.
Product Overview
GE Fanuc IC610CBL105 is a 10 ft (3 m), 24-pin Series One I/O interface cable that carries field connections between a compatible I/O module and its external termination point.
IC610CBL105 is a defined system cable rather than a generic field lead. Connector orientation, cable routing and mechanical condition affect reliable I/O communication.
The GE catalog table lists IC610CBL105 as the 10-foot (3-metre) I/O interface cable.
IC610CBL107 is separately listed for the high-speed counter and must not be confused with CBL105.
Technical Specifications
| Brand | GE Fanuc |
|---|---|
| Model | IC610CBL105 |
| Product Type | I/O Interface Cable |
| Country | United States |
| Length | 10 ft / 3 m |
| Platform | Series One |
| Role | Rack/interface connection |
| Inspection | Connector, strain relief and cable jacket |
| Installation | Power removed |
| Connector | 24-pin |
| Cable construction | I/O interface cable |
| Field-side practice | Provide a service loop for module removal |
Product Application
IC610CBL105 terminates compatible Series One I/O through a 24-pin connector and extends the connection by 10 ft (3 m).
The cable provides a removable interface between module electronics and field termination, so connector keying, strain relief and conductor identification remain part of the installation.
Because IC610CBL105 is a cataloged interface assembly, its connector shell, pin positions and strain relief are part of the signal path and cannot be replaced by matching length alone.
Connector and Cable Installation
The 24-pin plug must be fully keyed and seated with power removed. Field conductors should be identified and arranged so a service loop permits module removal without stressing the cable.
Low-level and DC signal wiring should remain separated from AC power conductors and noise-producing equipment along the cable route.
The plug should enter squarely without forcing; after securing the cable, continuity of the complete I/O path is verified through the connected module rather than by appearance alone.
IC610CBL105 FAQ
How long is IC610CBL105?
The manufacturer catalog lists 10 ft (3 m).
Is it the high-speed-counter cable for IC610CBL105?
No. IC610CBL107 is separately identified for the high-speed counter.
Can a generic cable be substituted for IC610CBL105?
Not without engineering verification of connector, pinout, shielding and system requirements.
What damage should be checked for IC610CBL105?
Inspect bent pins, loose shells, damaged strain relief, crushed jacket and contamination.
How is the replacement verified for IC610CBL105?
After safe reconnection, check rack communication and every affected I/O point.
What routing condition matters most for IC610CBL105?
Keep the interface cable free of tension and sharp bends and separate it from high-noise power wiring while preserving connector orientation.
Pre-shipment identification
Catalog numbers and requested quantities are checked against the sales order before dispatch documentation is prepared.
No related record found