Document the station
Record remote-base number, cable route, supply revision, input source, module list and any RUN/fault contact wiring.
Series Three Remote I/O Power
GE Fanuc IC630PWR320 / IC630PWR324 Series Three Remote Power Supplies
High-capacity remote Series Three power supplies for 115/230 Vac or 24 Vdc source systems.
IC630PWR320High-capacity remote I/O power supply
IC630PWR324High-capacity remote I/O power supply
Product Description
IC630PWR320 and IC630PWR324 are high-capacity Series Three power supplies intended for remote I/O base operation. IC630PWR320 accepts 115/230 Vac; IC630PWR324 is the 24 Vdc input version. Both provide the same listed +5 V and +12 V load-unit capacity to the remote base.
The remote supply adds control and indication functions required away from the CPU base. The ac version provides RUN terminals and normally-open fault-relay contacts that can be incorporated into external indication or alarm circuits. Those terminals must be treated as part of the field wiring record, not as ordinary backplane points.
A remote-base replacement requires more than matching voltage. Preserve base address and I/O cable routing, supply revision, mode/control wiring, alarm-contact use and all module load units. Validate the remote communications path and every mapped I/O point after power is restored.
Technical Specifications
| Specification | IC630PWR320 | IC630PWR324 |
|---|---|---|
| Brand | GE Fanuc | |
| Product Type | High-capacity remote I/O power supply | |
| Country | United States | |
| System Family | Series Three PLC | |
| Input Source | 115/230 Vac, 50/60 Hz | 24 Vdc |
| Rack Role | Remote Series Three I/O base | |
| +5 V Capacity | 300 load units (1 unit = 10 mA) | |
| +12 V Capacity | 200 load units (1 unit = 10 mA) | |
| Remote Control | RUN terminals with normally-open operating contacts | Remote-base control according to 24 Vdc supply hardware |
| Fault Indication | Normally-open fault-relay contacts for external alarm use | Remote supply status/fault function; preserve installed wiring |
| Integration | Remote base, I/O expander/CPU cable path and assigned I/O references | |
| Installation Record | Input wiring, alpha revision, RUN/fault contacts, base address, cable path and module inventory | |
Remote I/O Monitoring and Control
Both supplies deliver 300 units at +5 V and 200 units at +12 V to a remote Series Three base.
IC630PWR320 is selected for 115/230 Vac sites; IC630PWR324 provides the corresponding 24 Vdc input option.
On the ac remote supply, RUN and fault-relay contacts can signal controller state to external alarm or interlock circuits.
Remote power health must be checked together with the I/O communication cable, base addressing and mapped field points because a healthy dc rail alone does not prove remote I/O operation.
Remote Base Installation
Remove all energy
Isolate the supply input and every field circuit that can backfeed terminals in the remote base.
Install and reconnect
Match ac selection for IC630PWR320 or dc polarity for IC630PWR324, then restore I/O cable and alarm/control conductors exactly.
Prove the station
Confirm supply status, fault-contact behavior, remote communications and every mapped input/output point before returning the process to automatic control.
Product FAQ
What is the input difference between IC630PWR320 and IC630PWR324?
IC630PWR320 uses 115/230 Vac at 50/60 Hz; IC630PWR324 is the 24 Vdc remote supply.
Are IC630PWR320 and IC630PWR324 local CPU-base supplies?
They are identified as high-capacity remote I/O power supplies. Use IC630PWR310 or IC630PWR314 for the corresponding local high-capacity role.
What do the IC630PWR320 RUN contacts indicate?
The normally-open contacts are active in the documented RUN, RUN 1 or TEST modes and open when the operating condition is lost or an error is detected.
What must be preserved when replacing IC630PWR320 or IC630PWR324?
Preserve input wiring, base address, cable path, module load, supply revision and all RUN/fault contact connections.
How is a remote station accepted after installing IC630PWR320 or IC630PWR324?
Check power and fault behavior, verify the remote communication path, then test every assigned input and output with the process safely controlled.
Moore Automation
Industrial Automation Business Range
Moore Automation supplies PLC and DCS hardware, I/O modules, drives, operator interfaces, communication equipment and power components used across industrial control applications.
The company's published service commitments are 100% original products, fast delivery, a one-year warranty and a 12-hour online response.
Recommended Products
Siemens E88420-F5166-L5
Siemens 6FC5111-0CA04-0AA0
Siemens 6ES7405-0DA00-0AA0
Siemens 6ES7315-6FF00-0AB0
Siemens 3NP4075-0FF01
Siemens 6FX8002-2DC10-1CA0
Siemens 6DD1681-0AF4
Siemens 6EV3055-0BC
Siemens S1721L874
Siemens G85139-E1721-A867
Siemens G85139-E1721-A864
Siemens V23465-H3600-M111
Siemens 6NH9810-2T
Siemens 6GT2301-0AB00
Siemens 6EC3100-0A
Siemens 6DC1002-8DC
Siemens 6EC3870-0A
Siemens 6EC2400-0A
Siemens 6EC3434-0C
Siemens 6EC2480-0A
Siemens 6DC2021-8AC
Siemens 6EC3434-0B
Siemens 6EC3490-0A
Siemens 6DC3006-1AC
Siemens 6EC3820-0B
Siemens 6FX1126-1BB00
Siemens 6GK7443-5DX04-0XE0
Siemens S7-1200
Siemens 6ES5727-1CB50
Siemens 6ES5375-0LB11
Siemens 6FM1600-1BC00
Siemens 6FM1680-2FA00
Siemens 6ES5314-3UR11
Siemens 0005-24
Siemens 6DS1403-8CB
Siemens 6AB6151-7KA70
Siemens 3RB1066-1KG0
Siemens C73207-A311-A4-1
Siemens 474.9002.0
Siemens 6ES5721-0CB00
Siemens 7NG4030-4AA11-1NN0
Siemens 6ES5431-4UA
Siemens M08142-B1191-A100-Z
Siemens A5E00196733
Siemens M72120-T8500-D300
Siemens 470-8MB12
Siemens 7NG1206-4BD42-2RB2
Siemens 464-8MD11
Siemens 3UF5031-3AN00-1
Siemens 7NG1101-4AC42-1UD1
Siemens 71295
Siemens M2070872
Siemens 7AA13
Siemens 3RT1054-1AP36
Siemens M74003-A
Siemens 6ED1052-1FB00-0BA6
Siemens 3TF44
Siemens 6ES5451-8MA11
Siemens 3TF40
Siemens 3UA54
No related record found