HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN are Bosch Rexroth IndraDrive M HMS01 single-axis inverters. Each unit receives 254–750 V DC from the shared IndraDrive DC bus and converts it into a controlled three-phase motor output; neither model contains the mains rectifier used by an HCS converter.
At 4 kHz, HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN provide different current boundaries: the W0110 unit has 110 A maximum and 68.5 A continuous output, while the W0070 unit has 70.7 A maximum and 42.4 A continuous output. Both use the same switching-frequency range, but their current and power-loss values follow their respective frame sizes.
For cabinet installation, HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN are both 440 mm high and 262 mm deep. The W0110 frame is 125 mm wide with 165 m³/h forced airflow, whereas the W0070 frame is 100 mm wide with 80 m³/h airflow; both need 80 mm above and 100 mm below for cooling and cable routing.
HMS01.1N-W0110 mounting geometry and minimum cable-clearance envelope.
02
Technical Specifications
Attribute
HMS01.1N-W0110-A-07-NNNN
HMS01.1N-W0070-A-07-NNNN
Brand
Bosch Rexroth
Bosch Rexroth
Product type
Single-axis inverter
Single-axis inverter
DC-bus input
254…750 V DC
254…750 V DC
Maximum output current at 4 kHz
110.0 A
70.7 A
Continuous output current at 4 kHz
68.5 A
42.4 A
Continuous output current at 8 kHz
43.5 A
24.1 A
Control-voltage input
24 V ±20%
24 V ±20%
Mass
11.06 kg
7.94 kg
Housing height
440 mm
440 mm
Housing width
125 mm
100 mm
Housing depth
262 mm
262 mm
Forced-air volume
165 m³/h
80 m³/h
Top / bottom clearance
80 / 100 mm
80 / 100 mm
03
How two inverters share one DC-bus architecture
Both devices start at L+ and L- and end at a three-phase motor output, but each power stage is sized for a different current class.
01
Common upstream source
HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN receive their power from an IndraDrive DC bus in the 254–750 V range. The upstream supply unit or feeding converter forms that bus; the HMS devices begin at the DC connection rather than at an AC mains input.
02
Independent motor stages
Each of HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN contains its own inverter bridge and motor connection. Commands and feedback control the corresponding axis, so the two current classes do not describe a combined two-axis output.
03
Shared control-voltage principle
Both HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN use a separate 24 V control input for their electronics. The control supply remains distinct from the high-voltage DC bus feeding the motor-output stage.
04
Frame size follows current and airflow demand
The larger current class changes width, fan volume, mass and loss figures while preserving height and depth.
W0110 heat-removal path
The W0110 member of HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN uses the wider frame to carry its larger power section, heat sink and forced-air path. Motor conductors and cooling air therefore belong to the W0110 envelope even though the DC-bus and control-supply roles match the W0070 device.
W0070 heat-removal path
The W0070 member of HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN performs the same DC-to-motor conversion in a narrower frame with its own fan requirement. Its smaller enclosure does not authorize use of the W0110 conductor, loss or ventilation data.
Clearance serves air and cable movement
Both HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN reserve space above and below for forced-air movement and cable exit. Those clear areas are functional parts of the installation envelope, while the different frame widths determine side-to-side cabinet occupation.
1. For HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN, can either inverter be connected directly to the AC mains?
No. Both are IndraDrive M inverters that receive 254–750 V DC from the system DC bus; the AC mains rectifier belongs upstream on HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN.
2. How should the 110 A and 70 A designations be compared on HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN?
For HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN, compare current at the same switching frequency: at 4 kHz the W0110 is 110.0 A maximum / 68.5 A continuous, while the W0070 is 70.7 A maximum / 42.4 A continuous.
3. HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN: Do the two devices occupy the same cabinet width?
With HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN, no. W0110 is 125 mm wide and W0070 is 100 mm wide, although both are 440 mm high and 262 mm deep.
4. Why are their fan-volume values different for HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN?
The W0110 power stage has the larger current and loss envelope and uses 165 m³/h, while W0070 uses 80 m³/h for HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN.
5. Regarding HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN, what clearance remains common to both frames?
On HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN, both require 80 mm above and 100 mm below for the defined forced-air and cable-routing space.
6. Does the separate 24 V input carry motor power with HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN?
In HMS01.1N-W0110-A-07-NNNN and HMS01.1N-W0070-A-07-NNNN, no. The 24 V input feeds control electronics; motor power is taken from the 254–750 V DC bus and converted by each inverter.
For a paired HMS enquiry, Moore Automation lists the W0110 and W0070 codes on separate rows. Each row can carry its type-plate photo, frame width and 4 kHz current values, preventing the larger current class from being attached to the smaller housing.
The upstream DC-bus source is recorded as system information rather than being assumed from either inverter code. This keeps the power-supply unit and the two axis inverters distinct.
One evidence row per modelFrame width paired with current classDC-bus source noted separatelyType plates kept in model order
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found