Name: Bently Nevada 84661-96 Standard Armored Interconnect Cable
Brand: Bently Nevada
SKU: 2931714
Price: 1 USD
Availability: InStock

Product Introduction

Bently Nevada 84661-96 is a 96 ft standard armored interconnect cable with two shielded 22 AWG conductors. A moisture-resistant two-socket female connector at one end mates with the sensor-side connection, while terminal lugs at the other end provide the monitor-side termination.

The 96 ft suffix of Bently Nevada 84661-96 identifies the assembled cable length and represents the maximum standard length in this cable family. The two conductors carry the sensor circuit between the connector and terminal lugs, and the overall shield provides a defined screen around that signal path.

Stainless-steel armor forms the outer mechanical layer of Bently Nevada 84661-96 without changing the internal conductor and shield arrangement. Connector, conductors, shield, terminal lugs and armor are supplied as one completed interconnect assembly rather than as separate field components.

Official standard armored interconnect cable construction and termination drawing

Specification Details

Specification	84661-96
Brand	Bently Nevada
Product Name	Standard Armored Interconnect Cable
Country	Not specified
Length	96 ft
Published length range	3–96 ft
Conductors	2 × 22 AWG
Shield	Overall shield
Armor	Stainless-steel armor
Sensor end	Moisture-resistant two-socket female connector
Monitor end	Terminal lugs
Application	Velomitor interconnect
Selection warning	Not a three-conductor accelerometer cable

Connectivity

The two ends of Bently Nevada 84661-96 convert a sensor-side plug connection into individual monitor-side terminal connections across a 96 ft shielded path.

Two-socket sensor end

The moisture-resistant female connector presents two sockets for the sensor circuit. Its keyed connector body establishes the sensor-side connection without exposing individual conductors.

Terminal-lug monitor end

At the opposite end, the two conductors and shield terminate as labeled lugs. These lugs provide the discrete connection points used at the monitor or signal-conditioning terminal block.

Continuous cable assembly

The 96 ft cable, connector, lugs and armor are one part-numbered assembly. The length suffix describes the finished path between its two termination styles.

Diagnostics and Protection

The shield and stainless-steel armor of Bently Nevada 84661-96 protect different aspects of the cable while continuity and insulation checks reveal different fault types.

Shielded signal path

The overall shield surrounds the two conductors and provides the cable screen. Its termination remains separate from the two signal conductors at the lug end.

Mechanical armor

Stainless-steel armor protects the cable against external mechanical contact and supports the long run. It does not replace the internal electrical shield or change the two-conductor circuit.

Circuit verification

End-to-end continuity distinguishes an open conductor from an intact path, while insulation testing checks separation between conductors, shield and armor. The two tests address different failure modes in the same assembly.

Product Questions

How should the 96 ft record be verified at receiving when working with Bently Nevada 84661-96?

Measure or confirm the labeled assembled length and ensure the suffix has not been shortened to the base cable number. This boundary applies to Bently Nevada 84661-96.

Bently Nevada 84661-96 troubleshooting: why can a three-conductor cable not be substituted?

On Bently Nevada 84661-96, the conductor count, connector and destination circuit differ from the two-conductor velocity-sensor assembly.

Bently Nevada 84661-96: What armor damage requires rejection?

Bently Nevada 84661-96 requires this check: Crushed coils, sharp kinks, pulled fittings or exposed shield should be investigated before continuity testing.

How should the moisture-resistant connector be handled on Bently Nevada 84661-96?

For Bently Nevada 84661-96, keep sockets clean and dry, inspect the seal and mate without twisting the cable body.

When Bently Nevada 84661-96 is involved, what checks prevent reversed terminal wiring?

The correct approach for Bently Nevada 84661-96: Trace conductors end-to-end and verify each lug against the channel drawing before energizing.

For Bently Nevada 84661-96, how should a 96 ft route be commissioned?

With Bently Nevada 84661-96, verify continuity, insulation, shield termination, separation from power wiring and a stable signal baseline before closing the tray.

Warehouse & Logistics

Moore Automation

https://www.mvme.cn/

Moore Automation uses labeled storage and organized material handling for industrial automation components of different sizes, ages and manufacturers.

Protective packing is selected around the physical item, with identification kept visible so receiving teams can compare the delivered component with the order record.

Labeled warehouse storage

Component-safe handling

Protective packing selection

Receiving identification

Product Name	Bently Nevada 84661-96 Standard Armored Interconnect Cable
Item NO.	2931714
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-11-11

Bently Nevada 84661-96 Standard Armored Interconnect Cable Item NO.: 2931714

Bently Nevada 84661-96 Standard Armored Interconnect Cable

Product Introduction

Specification Details