Name: Bently Nevada 16710-28 3-Conductor Armored Accelerometer Cable
Brand: Bently Nevada
SKU: 2931754
Price: 1 USD
Availability: InStock

Product Information

Bently Nevada 16710-28 is a 28 ft armored interconnect cable for the Bently Nevada 330400 and 330425 accelerometer family. It provides the complete electrical path between the accelerometer connector and individual terminal connections at the monitoring end.

Inside Bently Nevada 16710-28, three shielded 22 AWG conductors run through a stainless-steel armored assembly. A three-socket plug at the sensor end mates with the accelerometer three-pin Mil-C-5015 receptacle, while terminal lugs expose the three conductors and shield at the opposite end.

The `28` suffix of Bently Nevada 16710-28 identifies the assembled 28 ft cable length within the 3-99 ft ordering range. Connector, conductors, shield, terminal lugs and armor are supplied as one cable assembly whose two ends serve different connection formats.

Bently Nevada 16710-28 cable connection interface with 330400 and 330425 accelerometer three-pin receptacle dimensional drawing

Product Specifications

Specification	16710-28
Brand	Bently Nevada
Product Name	3-Conductor Armored Accelerometer Cable
Country	Not specified
Length	28 ft
Published length range	3–99 ft
Conductors	3 × 22 AWG
Shield	Overall shield
Armor	Stainless-steel armor
Sensor end	Three-socket plug
Monitor end	Terminal lugs
Related sensor family	330400 / 330425 accelerometers
Selection warning	Not a two-conductor Velomitor cable

Communication

The connector and terminal ends of Bently Nevada 16710-28 carry the accelerometer circuit between two different physical interfaces without changing the three-conductor arrangement.

Three-socket sensor plug

The sensor end presents a three-socket plug that mates with the three-pin Mil-C-5015 receptacle on the 330400 or 330425 accelerometer. Connector keying keeps the three circuit positions aligned.

Shielded conductor path

Three 22 AWG conductors run together inside an overall shield from the plug to the terminal end. The shield surrounds the conductor group as a separate electrical layer.

Terminal-lug interface

At the monitoring end, individual lugs expose the conductor and shield connections for terminal-block wiring. This end converts the multi-pin plug arrangement into discrete connection points.

Compatibility

The physical interfaces of Bently Nevada 16710-28 are defined by the 330400/330425 three-pin receptacle at one end and terminal-lug wiring at the other.

Accelerometer connection

The three-socket plug corresponds to the three-pin Mil-C-5015 receptacle shown on the 330400 and 330425 accelerometer body. The connector relationship is mechanical and electrical, not a generic two-pin sensor connection.

Cable-family distinction

The 16710 family uses three 22 AWG conductors, unlike the two-conductor 84661 cable. Similar stainless-steel armor therefore does not make the two cable families interchangeable.

Length-specific assembly

The 28 ft suffix describes the finished connector-to-lug assembly. Other 16710 lengths retain the same end formats but represent different complete part numbers.

Questions & Answers

Bently Nevada 16710-28: How should 28 ft be verified at receiving?

Bently Nevada 16710-28 requires this check: Check the complete label and assembled cable record before routing; do not accept a base 16710 identity without the length suffix.

Why are three conductors required on Bently Nevada 16710-28?

For Bently Nevada 16710-28, the accelerometer circuit and connector use the documented three-conductor arrangement and cannot be replaced by a two-conductor Velomitor cable.

When Bently Nevada 16710-28 is involved, what should be checked on the three-socket plug?

The correct approach for Bently Nevada 16710-28: Inspect keying, socket grip, cleanliness and strain relief before mating to the 330400/330425 family sensor.

For Bently Nevada 16710-28, how is sensor-family compatibility confirmed?

With Bently Nevada 16710-28, match the cable drawing and connector to the installed 330400 or 330425 accelerometer record before shutdown.

What routing reduces electrical noise when working with Bently Nevada 16710-28?

Separate the armored cable from drive and motor circuits, follow the shield-grounding drawing and avoid large excess coils. This boundary applies to Bently Nevada 16710-28.

Bently Nevada 16710-28 troubleshooting: what lug defects require correction?

On Bently Nevada 16710-28, loose crimps, unreadable identifiers, corrosion or failed continuity must be repaired or the cable replaced before energizing.

International Delivery

Moore Automation

https://www.mvme.cn/

Moore Automation coordinates outbound industrial component orders for customers in different regions while retaining the product identity used during enquiry.

Packing references, destination details and carrier information remain linked to the item record, giving the receiving team a clear comparison point on arrival.

Export-order coordination

Destination record review

Carrier information

Arrival record support

Product Name	Bently Nevada 16710-28 3-Conductor Armored Accelerometer Cable
Item NO.	2931754
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-11-11

Bently Nevada 16710-28 3-Conductor Armored Accelerometer Cable Item NO.: 2931754

Bently Nevada 16710-28 3-Conductor Armored Accelerometer Cable

Product Information

Product Specifications