Name: Bently Nevada 330904-00-05-05-01-05 3300 XL NSv M8x1 Armored Proximity Probe
Brand: Bently Nevada
SKU: 2931711
Price: 1 USD
Availability: InStock

Product Summary

Bently Nevada 330904-00-05-05-01-05 is a 3300 XL NSv armored proximity probe with an M8x1 thread, a 50 mm case and a 0.5 m integral cable. It forms the sensing end of the compact NSv system and converts distance to a conductive target into a conditioned voltage through the matched NSv Proximitor Sensor.

The 0 mm unthreaded length of Bently Nevada 330904-00-05-05-01-05 places the threaded section directly behind the probe tip, while the armor protects the short integral lead up to the protected connector. The case, cable and connector arrangement fits locations where the larger 8 mm probe envelope is not suitable.

The NSv response of Bently Nevada 330904-00-05-05-01-05 uses a 1.5 mm linear range, a 7.87 V/mm scale factor and a 1.0 mm recommended gap. A 13 mm target diameter is recommended, and the system retains defined spacing requirements when more than one probe operates around the same small shaft.

Official 3300 XL NSv standard probe dimensions for metric armored configurations

Technical Details

Specification	330904-00-05-05-01-05
Brand	Bently Nevada
Product Name	3300 XL NSv M8x1 Armored Proximity Probe
Country	Not specified
Thread	M8x1
Unthreaded length	0 mm
Case length	50 mm
Integral cable	0.5 m
Connector option	Protector fitted
Approval option	05 — multiple approvals
Nominal linear range	1.5 mm
Average scale factor	7.87 V/mm
Recommended gap	1.0 mm
Recommended target diameter	13 mm
System family	3300 XL NSv

Key Features

The compact mechanical form and NSv measurement response of Bently Nevada 330904-00-05-05-01-05 are designed around small targets, short case geometry and a protected armored lead.

Metric probe body

The M8x1 thread and 50 mm case define the metric mounting envelope. With 0 mm unthreaded length, the thread begins directly behind the sensing tip.

Protected armored lead

Stainless-steel armor surrounds the 0.5 m integral cable and the `01` option adds a connector protector. Together they define the cable-side dimensions and termination arrangement.

Compact linear range

The NSv system provides a 1.5 mm calibrated range with a 7.87 V/mm scale factor. Its recommended 1.0 mm gap positions the target within that compact measurement span.

Interoperability

The probe, connector, extension cable and NSv Proximitor Sensor associated with Bently Nevada 330904-00-05-05-01-05 operate as a matched system and are distinct from 3300 XL 8 mm components.

NSv component family

The electrical calibration belongs to the NSv probe and NSv Proximitor Sensor combination. Similar connector appearance does not transfer the 8 mm system calibration to this probe.

Target-size relationship

The recommended target diameter is 13 mm because target size affects the field seen by the compact probe tip. Smaller targets require the specific NSv target guidance rather than 8 mm probe assumptions.

Multiple-probe spacing

Axial and radial probe arrangements use separate spacing dimensions to limit cross-talk. Those clearances belong to the physical layout around the shaft, not to an electronic setting.

Customer Questions

When Bently Nevada 330904-00-05-05-01-05 is involved, how can an imperial-port mix-up be prevented?

The correct approach for Bently Nevada 330904-00-05-05-01-05: Verify M8x1 threads with the machine drawing and receiving label before the probe is offered to the bracket.

For Bently Nevada 330904-00-05-05-01-05, what should be inspected at the armor transition?

With Bently Nevada 330904-00-05-05-01-05, look for pulled fittings, crushing and tight bends that can transfer vibration or damage the integral cable.

Why should the connector protector remain documented when working with Bently Nevada 330904-00-05-05-01-05?

The `01` field identifies the protected connector arrangement and affects required installation clearance. This boundary applies to Bently Nevada 330904-00-05-05-01-05.

Bently Nevada 330904-00-05-05-01-05 troubleshooting: can an 8 mm Proximitor Sensor be reused?

On Bently Nevada 330904-00-05-05-01-05, no; retain a matched NSv probe, extension and Proximitor Sensor chain.

Bently Nevada 330904-00-05-05-01-05: What target and gap checks reduce small-shaft errors?

Bently Nevada 330904-00-05-05-01-05 requires this check: Confirm target diameter, use the 1.0 mm recommended gap and verify the operating point in the linear range.

How should multiple approvals be handled on Bently Nevada 330904-00-05-05-01-05?

For Bently Nevada 330904-00-05-05-01-05, keep the `05` approval record and site certificates with the exact probe identity rather than relying on family appearance.

Quality & Documentation

Moore Automation

https://www.mvme.cn/

Moore Automation treats the manufacturer name, complete model, suffix and visible label details as the foundation of each industrial component enquiry.

Document review helps distinguish products that share a housing or connector while carrying different calibration, approval or mechanical records.

Label-photo review

Suffix and option checks

Document association

Variant separation

Product Name	Bently Nevada 330904-00-05-05-01-05 3300 XL NSv M8x1 Armored Proximity Probe
Item NO.	2931711
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-11-11

Bently Nevada 330904-00-05-05-01-05 3300 XL NSv M8x1 Armored Proximity Probe Item NO.: 2931711

Bently Nevada 330904-00-05-05-01-05 3300 XL NSv M8x1 Armored Proximity Probe

Product Summary

Technical Details