Wide cable temperature range
The ETR extension cable is rated from -52 to +260°C for operation and storage.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330190-080-00-05 8 m ETR Extension Cable |
| Item NO. | 2911780 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-09-29 |
Between the probe lead and the Proximitor Sensor, Bently Nevada 330190-080-00-05 supplies the 8.0 m extension section of a 3300 XL 8 mm extended-temperature-range transducer system. It preserves the triaxial probe signal across the high-temperature cable run so the Proximitor Sensor can convert target-gap changes into the output used by the monitoring channel.
PFA insulation allows 330190-080-00-05 to operate from -52 to +260°C along the extension-cable section. The 00 option is the standard, non-armored construction and the 05 option carries the listed approvals; during selection, its 8.0 m length must be added to the probe length so that the sum equals the total electrical length of the connected Proximitor Sensor.
| Technical Item | 330190-080-00-05 |
|---|---|
| Brand | Bently Nevada |
| Product Type | Extended-temperature-range extension cable |
| System | 3300 XL 8 mm Proximity Transducer System |
| Cable Family | 330190 ETR |
| Ordered Length | 8.0 m (26.2 ft) |
| Cable Option | Standard cable; no external armor |
| Insulation | PFA |
| Signal Construction | Triaxial proximity-transducer cable |
| Operating and Storage Temperature | -52 to +260°C (-62 to +500°F) |
| Agency Option | CSA, ATEX and IECEx approvals |
| Length Rule | Probe length + extension length = Proximitor system length |
| System Scale Factor | 7.87 V/mm (200 mV/mil) nominal |
| System Frequency Response | 0 to 10 kHz, +0/-3 dB |
| System Linear Range | 2 mm (80 mils) |
Bently Nevada 330190-080-00-05 is selected where the extension-cable portion of the 8 mm measurement chain is exposed to elevated temperature.
The ETR extension cable is rated from -52 to +260°C for operation and storage.
The 080 code contributes 8.0 m to the total transducer-system length.
The cable remains part of the calibrated 8 mm probe, extension and Proximitor combination.
The construction choices in 330190-080-00-05 separate electrical insulation, mechanical armor and approval fields.
PFA supports the elevated-temperature cable segment while maintaining the triaxial conductor geometry.
Option 00 omits the separate armor layer supplied by cable option 01.
Suffix 05 identifies the CSA, ATEX and IECEx approval selection for this cable.
The extension contributes 8.0 m. A 1.0 m compatible ETR probe completes a 9.0 m electrical length.
No. The 00 cable option is the standard construction; option 01 is the armored version.
No. It is the triaxial extension between the probe and Proximitor Sensor, not the three-conductor field wiring between the Proximitor output and monitor.
The ETR extension-cable range is -52 to +260°C. The Proximitor Sensor has its own lower temperature limit and is not assigned the cable rating.
It selects the CSA, ATEX and IECEx approval option. It does not change the 8.0 m cable length or the standard cable option.
Moore Automation reviews the complete code before quotation and keeps the requested option fields visible in the sales record. Enquiries receive coordinated part-number checks, quantity confirmation and delivery follow-up.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found