Small probe at the machine
The 1/4-28 UNF body positions the 5 mm sensing face where a larger case would not fit.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330171-00-28-10-02-05 3300 5 mm 1/4-28 UNF Proximity Probe |
| Item NO. | 2943274 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 330171-00-28-10-02-05 is an unarmored 1/4-28 UNF proximity probe in the 3300 5 mm transducer system. Its smaller probe body senses target movement where installation space is limited, the integral lead joins the 3300 XL extension cable, and the 3300 XL Proximitor Sensor converts the probe response into the voltage used by the monitor.
The mechanical code of 330171-00-28-10-02-05 specifies a 0.0 in unthreaded section, 2.8 in case and 1.0 m total probe length. Option 02 provides the standard miniature coaxial ClickLoc without a connector protector, while the final 05 selects multiple approvals.
In the complete system, 330171-00-28-10-02-05 participates in the published 2.0 mm linear range from approximately 0.25 to 2.3 mm. The 1.27 mm recommended gap places the target inside that range, and the nominal 7.87 V/mm scale factor applies to the matched probe, extension cable and Proximitor combination rather than to the probe alone.
| Attribute | 330171-00-28-10-02-05 |
|---|---|
| Brand | Bently Nevada |
| Product name | 3300 5 mm proximity probe |
| Probe base | 330171, 1/4-28 UNF without armor |
| Unthreaded length | 0.0 in |
| Overall case length | 2.8 in |
| Total length | 1.0 m |
| Connector | Miniature coaxial ClickLoc, standard cable |
| Connector protector | Not included in option 02 |
| System linear range | 2.0 mm, approximately 0.25 to 2.3 mm |
| Recommended gap | 1.27 mm |
| System scale factor | 7.87 V/mm |
| Field wiring limit | 305 m |
| Agency option | 05, multiple approvals |
The 5 mm probe reduces the mounting envelope but does not operate as an isolated sensor.
The 1/4-28 UNF body positions the 5 mm sensing face where a larger case would not fit.
The probe’s 1 m lead connects to a selected XL extension cable so the total circuit matches the Proximitor Sensor.
The matching electronics excite and linearize the probe response before field wiring carries the signal to the monitor.
The mechanical starting gap and electrical scale are checked together after the exact chain is assembled.
The 1.27 mm recommendation is inside the approximately 0.25–2.3 mm linear region and leaves movement allowance on both sides.
The 7.87 V/mm nominal factor includes the behavior of the matched probe, extension cable and Proximitor, not only the tip.
The 305 m field-wiring allowance applies from the Proximitor output toward the monitor, not to the coaxial probe cable.
Match 330171-00-28-10-02-05 to the correct XL extension cable and 5 mm/8 mm Proximitor Sensor for the calibrated total length.
Option 02 on 330171-00-28-10-02-05 provides the standard ClickLoc without a connector protector.
The smaller 330171-00-28-10-02-05 probe body supports installations with limited mechanical space while retaining the standard 3300 XL signal chain.
The final 05 in 330171-00-28-10-02-05 selects multiple approvals; verify the exact label for the markings supplied.
The recommended gap for the matched 5 mm system containing 330171-00-28-10-02-05 is 1.27 mm.
330171-00-28-10-02-05 has a 0.0 in unthreaded length and a 2.8 in overall case.
Moore Automation Limited reviews the complete manufacturer code before commercial processing. Type-plate photos, quantities and requested documentation can be grouped under the same enquiry while each exact model retains its own traceable line.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found