Bently Nevada 330130-035-00-05 3300 XL 8 mm Standard Extension Cable
3.5 M STANDARD CABLE · 8 MM PROXIMITY SYSTEM · SIGNAL PATH
Product Overview
Product identityBently Nevada 330130-035-00-05 is a 3300 XL 8 mm standard extension cable used between the 3300 XL probe and its Proximitor Sensor. The 035 code identifies the 3.5 m cable length in the complete extension-cable record.
In the measurement chain, Bently Nevada 330130-035-00-05 carries the probe signal across the extension path while the total system length remains the sum of probe, extension cable and Proximitor Sensor requirements. The cable routing and connector termination must remain within the 3300 XL system arrangement.
Bently Nevada 330130-035-00-05 remains a passive cable element: it does not condition the signal or provide a monitor output by itself. Its 3.5 m length, connector family and routing determine the probe-to-Proximitor electrical path and the total system length.
Product Data
Verified data| Technical item | Value |
|---|---|
| Brand | Bently Nevada |
| Product type | 3300 XL 8 mm standard extension cable |
| Model | 330130-035-00-05 |
| Cable length | 3.5 m |
| System | 3300 XL 8 mm proximity transducer system |
| Signal path | Probe to Proximitor Sensor |
| Cable type | Standard extension cable |
| Termination | 3300 XL system connectors |
| Selection boundary | Total probe + extension + sensor length |
| Installation focus | Routing, bend and connector seating |
| Cable assembly role | Passive probe-to-Proximitor interconnect |
| Connector family | 3300 XL ClickLoc connector system |
| Cable retention | 3300 XL CableLoc family supports high pull-strength retention |
| Cable option | Standard cable; FluidLoc is a separate family option |
| Signal conditioning | Performed by the matching Proximitor Sensor, not the cable |
| Total-length rule | Probe + extension + sensor cable length must remain within system limits |
| Environmental boundary | Route and terminate within the 3300 XL installation environment |
System Integration
Product focusBently Nevada 330130-035-00-05 forms the cable section of the 3300 XL probe measurement chain.
The extension cable connects to the 3300 XL probe output. The extension carries the probe output without interpreting it.
The opposite end terminates at the matching Proximitor Sensor path. The opposite connector terminates at the matching Proximitor path.
The 3.5 m extension must be included when checking the total electrical system length. The cable length contributes directly to the total system electrical length.
Bently Nevada 330130-035-00-05 does not amplify or interpret the signal; it preserves the probe-to-Proximitor connection. The passive cable role means conditioning remains in the Proximitor Sensor.
Installation Highlights
Integration focusCable routing for Bently Nevada 330130-035-00-05 affects termination quality and the measured signal path.
Seat both 3300 XL connectors fully before energizing the channel. Both ends belong to the same routed measurement path.
Keep the cable route clear of mechanical pinch points and preserve the specified connector orientation. The cable must remain seated at the probe and Proximitor boundaries.
Verify the combined probe, extension and sensor lengths rather than checking the extension alone. The total length is checked across all three system elements.
Bently Nevada 330130-035-00-05 joins the probe connector and Proximitor connector as one routed cable section. The cable-side boundary ends at the two 3300 XL connectors.
Questions About This Product
Field questionsWhere does Bently Nevada 330130-035-00-05 connect?
Within Bently Nevada 330130-035-00-05, it connects the 3300 XL probe to the matching Proximitor Sensor path. Confirm both connector ends and the channel record before energizing the monitor.
Does the 3.5 m length of Bently Nevada 330130-035-00-05 stand alone?
No. In Bently Nevada 330130-035-00-05, the 3.5 m extension is one part of the total probe system length. Add the probe and sensor cable requirements when checking the complete signal chain.
Can an arbitrary extension cable replace Bently Nevada 330130-035-00-05?
For Bently Nevada 330130-035-00-05, use the exact 3300 XL extension-cable code unless the system record explicitly permits another length. A similar connector does not establish the required electrical length.
What should be checked if Bently Nevada 330130-035-00-05 gives intermittent data?
When diagnosing Bently Nevada 330130-035-00-05, check connector seating, cable routing and the probe-side termination before changing the monitor. A loose extension termination can interrupt the probe signal without a monitor fault.
How should Bently Nevada 330130-035-00-05 be routed near machinery?
For the Bently Nevada 330130-035-00-05 setup, route it so the cable is not pinched or pulled at either connector. Keep the 3.5 m path consistent with the probe location and Proximitor entry point.
What information belongs in the Bently Nevada 330130-035-00-05 channel record?
For the Bently Nevada 330130-035-00-05 record, record the full extension code, cable length, probe model and Proximitor Sensor. This preserves the total measurement-chain configuration.
Shipping Services
Moore AutomationMoore Automation
https://www.mvme.cn/Moore Automation supports exact industrial automation records across control, monitoring, drive and instrumentation categories. Enquiries for Bently Nevada 330130-035-00-05 stay linked to the manufacturer and complete order reference.
Related Products
Mixed-brand selectionContact Information
Send the complete model and requested quantity with your enquiry.
No related record found