Name: Bently Nevada 330104-00-05-10-11-05 3300 XL 8 mm M10x1 Armored FluidLoc Proximity Probe
Brand: Bently Nevada
SKU: 2931752
Price: 1 USD
Availability: InStock

Product Introduction

Bently Nevada 330104-00-05-10-11-05 is a 3300 XL 8 mm armored proximity probe with an M10x1 thread, a 50 mm case and a 1.0 m FluidLoc integral cable. It forms the non-contact sensing end of the transducer system and works with the matched extension cable and Proximitor Sensor to produce a gap-dependent voltage.

The metric body of Bently Nevada 330104-00-05-10-11-05 uses a 0 mm unthreaded length, so the M10x1 thread begins immediately behind the probe tip. Stainless-steel armor surrounds the lead, and the protected connector completes the 1.0 m probe-side assembly.

FluidLoc construction in Bently Nevada 330104-00-05-10-11-05 creates a barrier within the cable path to limit liquid migration after probe-tip damage. The probe still retains the 2.0 mm linear range, 7.87 V/mm scale factor and 1.27 mm recommended gap of the 3300 XL 8 mm measurement system.

Official 3300 XL extension cable connector-protector dimensional drawing for protected cable configurations

Specification Details

Specification	330104-00-05-10-11-05
Brand	Bently Nevada
Product Name	3300 XL 8 mm M10x1 Armored FluidLoc Proximity Probe
Country	Not specified
Thread	M10x1
Unthreaded length	0 mm
Case length	50 mm
Total length	1.0 m
Cable option	FluidLoc
Connector	Protector fitted
Approval	05 — multiple approvals
Nominal linear range	2.0 mm
Average scale factor	7.87 V/mm
Recommended gap	1.27 mm
System family	3300 XL 8 mm

Protection

The FluidLoc cable, armor and connector protector of Bently Nevada 330104-00-05-10-11-05 address different physical paths around the probe assembly.

FluidLoc barrier

The internal FluidLoc construction limits migration through the cable after the sensing tip is damaged. Its function is specific to the cable path rather than to the external mounting thread.

Armored lead

Stainless-steel armor surrounds the 1.0 m integral lead and protects it from external mechanical contact. The armor remains outside the internal signal conductors and FluidLoc barrier.

Protected connector

The `11` cable option includes a connector protector at the end of the FluidLoc lead. This feature defines the termination envelope and keeps the exact cable option visible in the complete order record.

Certifications and Standards

The metric construction and multiple-approval field of Bently Nevada 330104-00-05-10-11-05 define its supplied mechanical and certification configuration.

Flush-start thread geometry

A zero unthreaded length lets the M10x1 mounting engagement begin at the sensing-end transition, while the 50 mm case establishes reach through a metric bracket. Those dimensions define the installed geometry independently of the FluidLoc cable option.

Multiple approvals

The final `05` field identifies the multiple-approval option assigned to this complete configuration. The approval identity applies to the full probe record, including its FluidLoc cable option.

System calibration

The 2.0 mm range and 7.87 V/mm scale factor belong to the matched 3300 XL 8 mm transducer system. Mechanical certification and electrical calibration remain separate aspects of the same supplied probe.

Product Questions

What does FluidLoc protect against when working with Bently Nevada 330104-00-05-10-11-05?

It limits migration through the probe cable after tip damage; it is not a substitute for correcting the process-fluid source. This boundary applies to Bently Nevada 330104-00-05-10-11-05.

Bently Nevada 330104-00-05-10-11-05 troubleshooting: how should M10x1 fit be checked?

On Bently Nevada 330104-00-05-10-11-05, verify the metric port and locknut before insertion and reject cross-threading or adapter shortcuts.

Bently Nevada 330104-00-05-10-11-05: Which system length applies?

Bently Nevada 330104-00-05-10-11-05 requires this check: Retain the 1.0 m record and match the extension and Proximitor Sensor accordingly.

Why is the connector protector part of the identity on Bently Nevada 330104-00-05-10-11-05?

For Bently Nevada 330104-00-05-10-11-05, the `11` option includes the protected FluidLoc arrangement and affects clearance and receiving inspection.

When Bently Nevada 330104-00-05-10-11-05 is involved, how should multiple approvals be retained?

The correct approach for Bently Nevada 330104-00-05-10-11-05: Keep the `05` field and supporting certificates with the exact model through replacement.

For Bently Nevada 330104-00-05-10-11-05, what should happen if oil appears at the connector?

With Bently Nevada 330104-00-05-10-11-05, isolate the channel, inspect the probe-tip and cable path, correct the mechanical leak and test the complete system before reuse.

Order Traceability

Moore Automation

https://www.mvme.cn/

Moore Automation keeps the requested catalog identity connected to the commercial and logistics record throughout an industrial component order.

This traceability is especially useful for suffix-heavy products, where a shortened family name can hide differences in thread, cable, connector or approval configuration.

Catalog-to-order linkage

Suffix preservation

Commercial record continuity

Receiving traceability

Product Name	Bently Nevada 330104-00-05-10-11-05 3300 XL 8 mm M10x1 Armored FluidLoc Proximity Probe
Item NO.	2931752
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-11-11

Bently Nevada 330104-00-05-10-11-05 3300 XL 8 mm M10x1 Armored FluidLoc Proximity Probe Item NO.: 2931752

Bently Nevada 330104-00-05-10-11-05 3300 XL 8 mm M10x1 Armored FluidLoc Proximity Probe

Product Introduction

Specification Details