Common threaded entry
Both 330101-00-47-05-02-05 / 330101-00-50-05-02-00 enter a 3/8-24 UNF mounting thread and start with zero unthreaded length.
Bently Nevada 330101-00-47-05-02-05 / 330101-00-50-05-02-00 proximity probes
Model Overview
Bently Nevada 330101-00-47-05-02-05 / 330101-00-50-05-02-00 are standard-mount proximity probes in the 3300 XL 8 mm Proximity Transducer System. Each probe places an 8 mm sensing tip opposite a conductive target, where a change in target distance produces the response used by the complete system for position or vibration measurement.
The shared 3/8-24 UNF mounting thread lets 330101-00-47-05-02-05 / 330101-00-50-05-02-00 use the same threaded entry, but their 4.7 in and 5.0 in case lengths place the cable transition at different distances from the mounting surface. This case-length difference changes the mechanical reach while the sensing-tip size and attached lead length remain common.
From the probe tip, 330101-00-47-05-02-05 / 330101-00-50-05-02-00 carry the target response through the attached triaxial lead to a miniature ClickLoc connector. The matching extension cable and Proximitor Sensor continue that path and convert the probe response into the electrical output used by the monitoring channel.
Technical Specifications
| Technical Item | 330101-00-47-05-02-05 | 330101-00-50-05-02-00 |
|---|---|---|
| Brand | Bently Nevada | |
| Product Type | 3300 XL 8 mm proximity probe | |
| Product System | 3300 XL 8 mm Proximity Transducer System | |
| Mounting Form | Standard mount | |
| Probe Armor | Without armor | |
| Case Thread | 3/8-24 UNF | |
| Unthreaded Length | 0.0 in | |
| Overall Case Length | 4.7 in | 5.0 in |
| Total Probe Length | 0.5 m (1.6 ft) | |
| Cable Construction | Standard cable | |
| Connector | Miniature coaxial ClickLoc | |
| Connector Protector | Not included | |
| Agency Approval | 05 - multiple approvals | 00 - not required |
| Probe Tip Diameter | 8.0 mm (0.31 in) | |
| Cable Impedance | 75 ohm triaxial | |
| Cable Insulation | FEP | |
| Maximum Cable Outside Diameter | 3.68 mm (0.145 in) | |
| System Linear Range | 2 mm (80 mils) | |
| System Scale Factor | 7.87 V/mm (200 mV/mil) | |
Key Features — Case-Length Comparison
The two configurations in 330101-00-47-05-02-05 / 330101-00-50-05-02-00 share the same sensing family but place the wrench flats and connector transition at different case lengths.
Different body reach
The 4.7 in and 5.0 in cases of 330101-00-47-05-02-05 / 330101-00-50-05-02-00 change where the cable leaves the threaded body.
Separate approval suffixes
The final 05 and 00 suffixes keep the approval identity of 330101-00-47-05-02-05 / 330101-00-50-05-02-00 distinct during ordering.
Performance Characteristics — Half-Metre Probe Path
Signal behavior for 330101-00-47-05-02-05 / 330101-00-50-05-02-00 depends on the complete 0.5 m probe path and its matched sensor arrangement.
Target gap input
Movement at the 8 mm tip of 330101-00-47-05-02-05 / 330101-00-50-05-02-00 changes the electrical response without contact.
Triaxial transfer
The attached 75 Ω cable on 330101-00-47-05-02-05 / 330101-00-50-05-02-00 carries that response to the ClickLoc interface.
Matched conversion
A corresponding Proximitor Sensor converts the response from 330101-00-47-05-02-05 / 330101-00-50-05-02-00 into the measurement output.
Common Product Questions
Which field measurement separates 330101-00-47-05-02-05 / 330101-00-50-05-02-00 before ordering?
Measure the required overall case length for 330101-00-47-05-02-05 / 330101-00-50-05-02-00: 4.7 in belongs to the first code and 5.0 in to the second. Do not rely on thread size because both use 3/8-24 UNF.
Why should the approval suffix of 330101-00-47-05-02-05 / 330101-00-50-05-02-00 stay visible on a quotation?
The first member of 330101-00-47-05-02-05 / 330101-00-50-05-02-00 carries approval code 05, while the second ends in 00. Removing the final suffix hides a compliance difference even though the sensing family is shared.
Can 330101-00-47-05-02-05 / 330101-00-50-05-02-00 be forced into an M10 mounting hole?
No. 330101-00-47-05-02-05 / 330101-00-50-05-02-00 use 3/8-24 UNF threads, not M10 × 1. A forced installation can damage both the probe body and the machine thread.
What should be checked when 330101-00-47-05-02-05 / 330101-00-50-05-02-00 show an unstable signal after cable movement?
Check the attached lead, ClickLoc engagement, and bend immediately behind the case on 330101-00-47-05-02-05 / 330101-00-50-05-02-00. Then confirm that target gap and probe mounting did not move before changing monitor settings.
Do 330101-00-47-05-02-05 / 330101-00-50-05-02-00 include connector protectors?
No. The cable option 02 in 330101-00-47-05-02-05 / 330101-00-50-05-02-00 specifies standard cable without a connector protector. If protection is required, the exact ordering suffix must identify it.
Why is a complete calibrated chain required for 330101-00-47-05-02-05 / 330101-00-50-05-02-00?
The probe, cable length, and Proximitor Sensor for 330101-00-47-05-02-05 / 330101-00-50-05-02-00 act as one transducer system. Mixing an unmatched cable or sensor changes the electrical relationship used to convert gap into output voltage.
Customer Support
MOORE AUTOMATION
https://www.mvme.cn/Moore Automation keeps one contact attached to the enquiry so clarification about model suffixes, requested quantity, destination, and quotation status remains in a single communication path.
Single contactOne manager follows the enquiry.
Suffix reviewComplete ordering fields are retained.
www.mvme.cn
Product Recommendations
Siemens6ES7151-1AA00-0AB0
GEIC695PSA040L
HoneywellCC-TFB412
Mitsubishi ElectricFR-F840-01800-2-60
OmronC500-RT002
Schneider ElectricTSXDEY32D2K
Rockwell Automation1756-L55M13
YaskawaCIMR-XCAEB0P7
BeckhoffBK2000
WAGO750-154
SEW-EURODRIVEMDX61B0008-5A3-4-0T
ABBACS355-03E-02A4-2
Siemens6FX2001-7KF10
GEIC693CMM311N
HoneywellCC-TAON01
Mitsubishi ElectricFX3S-10MR/DS
OmronC500-OC221
Schneider Electric140NOM21200
Rockwell Automation1771-WC
YaskawaSGDL-08AP
BeckhoffEL9011
WAGO750-515
SEW-EURODRIVEMC07B0015-5A3-4-00
ABBACS355-03E-03A5-2
Siemens6ES7132-6BH01-0BA0
GEIC200UEX636-C
HoneywellDC-TDOD51
Mitsubishi ElectricAJ65SBTB1-16D
OmronC200H-OC224
Schneider ElectricTM215-28BSPT
Rockwell Automation1771-IBN
YaskawaSGDS-01F31AY500
BeckhoffBK3520
WAGO750-1415
SEW-EURODRIVEMDX61B0005-5A3-4-0T
ABBACS355-03E-08A8-4+B063
Siemens6EP1437-2BA20
GEIC693PWR321Y
HoneywellCC-IP0101
Mitsubishi ElectricFX808328.5R
OmronCJ1W-ID232
Schneider ElectricTM2DDI8DT
Rockwell Automation1746-NI4
YaskawaSGDM-05DN
BeckhoffEL9100
WAGO750-506
SEW-EURODRIVEMDX61B0220-503-4-00
ABBACS355-03E-17A6A
Siemens6ES7277-0AA22-0XA0
GEIC693MDL655J
HoneywellTC-IDD321
Mitsubishi ElectricFR-A024-0.2KP
OmronCJ1W-IC101
Schneider ElectricTSX1
Rockwell Automation1756-L7SP
YaskawaCIMR-EB4A0
BeckhoffEL082010054111A0000
WAGO750-0972
SEW-EURODRIVEMDX61B0110-5A3-4-0T/L
ABBACS380-040S-032A
Sales Contact
Send the complete model, quantity, and destination for a precise quotation.
No related record found