Name: Bently Nevada 330901-10-60-70-02-05 | 3300 XL NSv Proximity Probe
Brand: Bently Nevada
SKU: 2925428
Price: 1 USD
Availability: InStock

Product Information

Bently Nevada 330901-10-60-70-02-05 is a complete 3300 XL NSv proximity probe order string for non-contact vibration and position measurement. The narrow-side probe family is used where the available machine space requires the NSv probe geometry and its matching 3300 XL NSv Proximitor sensor.

The complete suffix on Bently Nevada 330901-10-60-70-02-05 identifies the supplied probe execution, including the mechanical and electrical options selected for the installation. The probe does not produce a usable monitor signal by itself; it forms a matched probe, cable and Proximitor chain.

At the machine, Bently Nevada 330901-10-60-70-02-05 is positioned against a conductive target with a controlled gap. The Proximitor sensor supplies the probe excitation, conditions the returned signal and passes the displacement or vibration output to the monitoring system.

Official technical diagram for 330901-10-60-70-02-05

Technical Data

Technical Item	Value
Model	330901-10-60-70-02-05
Brand	Bently Nevada
Product origin	USA
Signal family	Eddy-current proximity measurement
System family	3300 XL / 3300 system
Connector family	Miniature coaxial ClickLoc where applicable
Product type	3300 XL NSv proximity probe
Case configuration	Complete suffix-controlled order string
Probe family	3300 XL NSv narrow-side system
Cable / connector	Configured by the complete suffix
Typical linear range	2.0 mm (80 mil) for 3300 XL 8 mm systems
Nominal scale factor	7.87 V/mm (200 mV/mil) for 3300 XL 8 mm systems
Typical frequency response	0 to 10 kHz, +0/−3 dB typical for 3300 XL 8 mm systems
Probe target	Conductive target; published values use AISI 4140 steel
Mounting requirement	Rigid bracket or housing with controlled probe gap
Operating temperature	Depends on the selected Bently Nevada family and exact suffix
Electrical path	Probe / cable / Proximitor sensor matched as a complete system
A — unthreaded length 10	10 = 1.0 in unthreaded length; the value remains at least 0.7 in below the case length
B — case length 60	60 = 6.0 in overall case length
C — total length 70	70 = 7.0 m (23.0 ft) total probe length
D — connector/cable 02	02 = miniature coaxial ClickLoc connector with standard cable and no connector-protector option
E — approvals 05	05 = multiple approvals
Target material	Conductive machine target; gap is set in the matched NSv linear range
Probe case material	AISI 304 stainless steel; probe cable is 75 ohm coaxial FEP-insulated cable
Environmental boundary	Follow the selected NSv probe, cable and Proximitor temperature limits

Product Functions

Bently Nevada 330901-10-60-70-02-05 senses target motion without touching the shaft and transfers the result into the 3300 XL NSv signal chain.

Non-contact sensing

The probe coil responds to the changing gap between the probe tip and conductive target without mechanical contact.

Matched transducer path

The probe, selected cable execution and NSv Proximitor sensor operate as one electrical length.

Position and vibration output

Static gap appears as the dc operating level while shaft motion is carried as the changing component of the conditioned output.

Installation Highlights

The installation of Bently Nevada 330901-10-60-70-02-05 is governed by the complete suffix and the mechanical clearance available around the narrow-side probe.

Suffix verification

The full 330901-10-60-70-02-05 string must remain on the label and enquiry so the supplied execution is not confused with another NSv option.

Probe-to-target gap

Set the probe gap inside the linear region of the matched 3300 XL NSv system before relying on the monitor output.

Cable routing

Keep the cable route supported and clear of sharp edges, heat sources and moving machine parts.

Product Questions

What does Bently Nevada 330901-10-60-70-02-05 identify?

Bently Nevada 330901-10-60-70-02-05 identifies a complete 3300 XL NSv proximity probe execution, not only a generic probe family.

Which electronics work with Bently Nevada 330901-10-60-70-02-05?

Bently Nevada 330901-10-60-70-02-05 belongs to the matched 3300 XL NSv probe, cable and Proximitor sensor chain.

How is the gap set for Bently Nevada 330901-10-60-70-02-05?

Bently Nevada 330901-10-60-70-02-05 is positioned against the conductive target and adjusted inside the linear range of its matched NSv system.

Can Bently Nevada 330901-10-60-70-02-05 be wired with an arbitrary cable?

No. Bently Nevada 330901-10-60-70-02-05 is part of a calibrated electrical length, so cable execution and sensor matching must be checked together.

What should be checked if Bently Nevada 330901-10-60-70-02-05 has unstable output?

Bently Nevada 330901-10-60-70-02-05: Check the probe gap, cable connection, target condition and the matching NSv Proximitor sensor before changing monitor settings.

Why must the complete Bently Nevada 330901-10-60-70-02-05 suffix be retained?

Bently Nevada 330901-10-60-70-02-05: The complete suffix distinguishes the mechanical, cable and approval execution selected for the installed NSv probe.

Our Services

Moore Automation

https://www.mvme.cn/

Moore Automation supports narrow-space measurement records with complete model checking for probe geometry, cable execution and approvals.

Bently Nevada 330901-10-60-70-02-05 stays tied to its 3300 XL NSv configuration during the enquiry process.

NSv model checkThe complete narrow-side probe string remains visible.

Configuration reviewProbe, cable and Proximitor details are kept together.

Supply coordinationAvailability and dispatch information follow the exact record.

www.mvme.cn

Product Name	Bently Nevada 330901-10-60-70-02-05 \| 3300 XL NSv Proximity Probe
Item NO.	2925428
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-10-20

Bently Nevada 330901-10-60-70-02-05 | 3300 XL NSv Proximity Probe Item NO.: 2925428

Bently Nevada 330901-10-60-70-02-05 | 3300 XL NSv Proximity Probe