Machine-case interface
The 3/4-14 NPT outer sleeve threads into the machine case and establishes the fixed mounting reference for both complete codes.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 31000 Proximity Probe Housing Assemblies |
| Item NO. | 2940230 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-17 |
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 identifies two 31000 proximity probe housing assemblies built around the 3300 XL 8 mm probe option. Each assembly places the probe sleeve inside a sealed field housing so the probe gap can be set at the machine case while the cable connection remains enclosed.
In Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02, both records use a 1.0 m probe cable, no standoff adapter and a 3/4-14 NPT mounting thread. The first assembly provides 18.5 in of probe penetration with two conduit fittings and one plug; the second provides 19.0 in with one conduit fitting and two plugs.
The installation path for Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 runs from the machine-case thread through the outer sleeve and retaining nut to the probe sleeve. After the gap is adjusted, the housing is positioned over the sleeve, the retainer locks the assembly, and the probe cable is reconnected inside the enclosure.
| Specification | 31000-28-10-00-185-02-02 | 31000-28-10-00-190-01-02 |
|---|---|---|
| Brand | Bently Nevada | Bently Nevada |
| Product type | Proximity probe housing assembly | Proximity probe housing assembly |
| Base series | 31000 | 31000 |
| Probe option | 28 · 3300 XL 8 mm | 28 · 3300 XL 8 mm |
| Probe cable | 10 · 1.0 m | 10 · 1.0 m |
| Standoff adapter | 00 · none | 00 · none |
| Probe penetration | 185 · 18.5 in | 190 · 19.0 in |
| Fitting option | 02 · two fittings, one plug | 01 · one fitting, two plugs |
| Mounting thread | 02 · 3/4-14 NPT | 02 · 3/4-14 NPT |
| Enclosure rating | NEMA 4X / IP66 | NEMA 4X / IP66 |
| Temperature range | -51 to +177 °C | -51 to +177 °C |
| Housing material | Glass-reinforced PPS with conductive fibers | Glass-reinforced PPS with conductive fibers |
| Sleeve material | AISI 304 stainless steel | AISI 304 stainless steel |
| Typical assembly weight | 1.2 kg | 1.2 kg |
| Retaining-nut torque | 29.4 N·m | 29.4 N·m |
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 uses the same six-step mechanical path with two different penetration lengths.
The 3/4-14 NPT outer sleeve threads into the machine case and establishes the fixed mounting reference for both complete codes.
The probe passes through the adjustable sleeve; the locknut holds the selected gap while the cable exits into the housing.
The retainer, retaining nut and captive-screw cover keep the sleeve and cable connection associated with the IP66 housing.
The last two option fields in Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 coordinate the enclosure openings with the long probe sleeve outside the box; they do not describe two unrelated accessories.
31000-28-10-00-185-02-02 leaves two fitted cable or conduit paths available, while its remaining opening is sealed so the field wiring can approach the housing from the planned directions.
31000-28-10-00-190-01-02 provides one fitted entry and closes the other two openings; the plugs preserve the enclosure boundary where no cable route is used.
The 18.5 in and 19.0 in sleeves extend the sensing point well below the housing. Additional support stabilizes that mechanical reach without changing the probe gap set inside the sleeve.
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 differs in both probe penetration and fitting arrangement. Match 18.5 in with option 02 fittings, or 19.0 in with option 01 fittings; do not select from the 31000 family name alone.
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 uses the probe sleeve, locknut, outer sleeve and retaining nut as one mechanical chain. The probe gap is set before the housing is closed, and the locking parts retain that position.
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 has 18.5 in and 19.0 in penetration values. Both exceed the 12 in threshold for added sleeve support, so the long stainless-steel sleeve cannot be left unsupported.
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 should remain tied to its ordered fitting option. The 185 record is option 02 and the 190 record is option 01; changing the entry arrangement changes the supplied assembly.
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 carries the housing enclosure rating, but the housing is not a pressure vessel. NEMA 4X / IP66 sealing does not mean that the housing can contain internal or external process pressure.
Bently Nevada 31000-28-10-00-185-02-02 / 31000-28-10-00-190-01-02 should be written with every segment, including 185 or 190 and 01 or 02. Those segments identify the penetration and cable-entry hardware that separate the two assemblies.
https://www.mvme.cn
Moore Automation handles industrial automation enquiries using the complete manufacturer, part number, revision and quantity as the working record. Product identity and available documentation are kept together before commercial details are prepared.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found