Target gap
The 8 mm PPS tip faces the conductive target and converts gap change into the high-frequency response used by the transducer system.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330101-00-81-10-02-05 3300 XL 8 mm Standard-Mount Probe |
| Item NO. | 2940232 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-17 |
Bently Nevada 330101-00-81-10-02-05 is a 3300 XL 8 mm standard-mount proximity probe with a 3/8-24 UNF case and no cable armor. Within a complete transducer system, the probe senses the distance to the conductive target and carries that response through its integral cable to the extension cable and Proximitor sensor.
The code for Bently Nevada 330101-00-81-10-02-05 specifies 0.0 in unthreaded length, 8.1 in overall case length and 1.0 m total probe length. The long threaded case sets the mechanical reach, while the 25.4 mm minimum cable bend radius protects the triaxial cable path after it leaves the probe body.
At the connection boundary, Bently Nevada 330101-00-81-10-02-05 uses the miniature ClickLoc coaxial connector without a connector protector and carries the multiple-approval option. The connector is finger-tightened; the documented maximum connector torque is 0.565 N·m.
| Specification | 330101-00-81-10-02-05 |
|---|---|
| Brand | Bently Nevada |
| Product type | 3300 XL 8 mm standard-mount probe |
| Mounting thread | 3/8-24 UNF |
| Cable armor | None |
| Unthreaded length | 0.0 in |
| Overall case length | 8.1 in |
| Total probe length | 1.0 m |
| Connector | Miniature ClickLoc coaxial |
| Connector protector | Not supplied |
| Agency option | Multiple approvals |
| Probe tip diameter | 8.0 mm |
| Probe tip material | PPS |
| Case material | AISI 303 / 304 stainless steel |
| Minimum cable bend radius | 25.4 mm |
| Standard temperature range | -51 to +177 °C |
Bently Nevada 330101-00-81-10-02-05 is the sensing end of a probe, cable and Proximitor measurement path.
The 8 mm PPS tip faces the conductive target and converts gap change into the high-frequency response used by the transducer system.
The integral 75 Ω triaxial FEP cable carries the probe response while maintaining the required system impedance.
The ClickLoc connection joins the probe lead to the extension cable that completes the specified system length to the Proximitor.
Mechanical reach and cable handling are separate parts of the Bently Nevada 330101-00-81-10-02-05 code.
The 8.1 in case provides the insertion reach while the 0.0 in option leaves no unthreaded section at the tip end.
The 1.0 m total probe length includes the lead from the case to the connector; bends must stay at or above the minimum radius.
Gold-plated ClickLoc contacts form the coaxial joint and are secured by finger tightening rather than high connector torque.
Bently Nevada 330101-00-81-10-02-05 uses 81 for an 8.1 in overall case length. It defines mechanical reach and should not be read as cable length.
Bently Nevada 330101-00-81-10-02-05 uses option 10 for the probe total length from the probe body through its integral cable to the connector.
Bently Nevada 330101-00-81-10-02-05 is the 330101 standard-mount construction without armor. The cable must be routed and supported for that unarmored configuration.
Bently Nevada 330101-00-81-10-02-05 uses a ClickLoc coaxial connector intended for finger tightening, with 0.565 N·m as the documented maximum torque.
Bently Nevada 330101-00-81-10-02-05 has a 25.4 mm minimum cable bend radius. The route should preserve that radius rather than turning immediately against the case.
Bently Nevada 330101-00-81-10-02-05 uses option 05 for the multiple-approval version. The complete suffix must remain on the enquiry and label comparison.
https://www.mvme.cn
Moore Automation provides enquiry coordination for industrial automation parts, including part-number review, document matching and order-detail confirmation. The service record keeps the requested model, quantity and destination visible through the discussion.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found