Probe-to-target gap
The 8 mm tip faces the machine surface and changes the electrical response as the target gap changes.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 21504-036-068-10-02 7200 Series 8 mm Standard-Mount Probe |
| Item NO. | 2940233 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-17 |
Bently Nevada 21504-036-068-10-02 is an 8 mm standard-mount proximity probe from the 7200 Series 5 mm and 8 mm transducer system. Its 3/8-24 case has no lead armor, and the probe forms the sensing end of the probe, extension-cable and Proximitor measurement chain.
The mechanical options in Bently Nevada 21504-036-068-10-02 specify 3.6 in of unthreaded length and 6.8 in of overall case length. The unthreaded section defines the smooth tip-end reach, while the complete case length controls the distance available through the mounting structure.
For signal connection, Bently Nevada 21504-036-068-10-02 uses a 1.0 m total probe length and a miniature male coaxial connector. The probe and the selected extension cable must combine with the matching Proximitor as one calibrated 7200 system rather than being interpreted as independent cable parts.
| Specification | 21504-036-068-10-02 |
|---|---|
| Brand | Bently Nevada |
| Series | 7200 proximity transducer system |
| Product type | 8 mm standard-mount probe |
| Base part number | 21504 |
| Tip diameter | 8 mm |
| Configuration | Standard mount |
| Case thread | 3/8-24 |
| Lead armor | No |
| Unthreaded length | 3.6 in |
| Overall case length | 6.8 in |
| Total probe length | 1.0 m |
| Connector | Miniature male coaxial |
| Nominal linear range | 80 mil / 2.0 mm |
| Nominal scale factor | 200 mV/mil / 8 V/mm |
| System elements | Probe, extension cable and Proximitor |
Bently Nevada 21504-036-068-10-02 supplies the probe portion of the 7200 transducer system.
The 8 mm tip faces the machine surface and changes the electrical response as the target gap changes.
The 1.0 m probe lead terminates in a miniature male coaxial connector for the matched extension cable.
The extension cable completes the required system length to the Proximitor, which converts the probe response into the measurement voltage.
Bently Nevada 21504-036-068-10-02 combines two mechanical lengths with a separate electrical lead; reading them together shows where the probe can be clamped and where cable routing begins.
The 3.6 in smooth section extends from the sensing tip to the threaded portion. It determines how far the tip can pass beyond the mounting thread before the 3/8-24 case is secured.
The 6.8 in overall case length includes the smooth and threaded body, so it defines the complete rigid reach rather than an additional length added after the 3.6 in section.
Beyond the case, the unarmored 1.0 m lead carries the signal to the miniature coaxial connector. Mechanical support and routing therefore change at the case-to-cable transition, not at the sensing tip.
Bently Nevada 21504-036-068-10-02 uses 036 for 3.6 in unthreaded length and 068 for 6.8 in overall case length; the two fields describe different portions of the probe body.
Bently Nevada 21504-036-068-10-02 ends in the option 02 miniature male coaxial connector. Check the extension-cable connector and 7200 system pairing instead of forcing a mechanically different joint.
Bently Nevada 21504-036-068-10-02 is the unarmored 21504 construction. Route and support its cable as an unarmored lead rather than relying on a stainless-steel armor layer that is not present.
Bently Nevada 21504-036-068-10-02 is specified as part of a calibrated probe, extension-cable and Proximitor system. The 1.0 m probe lead alone is not the full measurement chain.
Bently Nevada 21504-036-068-10-02 uses the 21504 standard 3/8-24 case thread, distinct from the metric 8 mm probe variants in the same 7200 table.
Bently Nevada 21504-036-068-10-02 reaches the nominal 200 mV/mil scale and 80 mil range only as the matched 7200 probe, extension-cable and Proximitor system. Verify the complete chain and total system length before changing monitor scaling.
https://www.mvme.cn
Moore Automation structures each request around the information needed to identify the product correctly. Clear model photographs, nameplate details and revision marks can be attached to the same enquiry when a family contains several closely related options.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found