Standoff outside the case
The 1.5 in standoff keeps the enclosure away from the machine surface and provides the external portion of the sleeve stack.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 21000-28-05-15-082-01-02 21000 Aluminum Proximity Probe Housing Assembly |
| Item NO. | 2943262 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 21000-28-05-15-082-01-02 is an aluminum-body proximity probe housing assembly for a 3300 XL 8 mm probe with multiple approvals. It provides the machine-case mounting point, guides the probe through a 304 stainless-steel sleeve and contains the internal connector before the signal cable leaves through the selected conduit fitting.
The length fields of 21000-28-05-15-082-01-02 identify a 0.5 m probe cable, 1.5 in standoff and 8.2 in penetration. Conduit option 01 adds one 3/4-14 NPT explosion-proof fitting and one plug, and mounting option 02 provides the 3/4-14 NPT thread used to enter the machine case.
During installation, 21000-28-05-15-082-01-02 holds the outer sleeve in the case while the probe sleeve is adjusted independently to establish the target gap. The enclosure is rated Type 4X/IP66; if the chosen total sleeve length exceeds 12 in, mechanical support is required rather than relying on the housing alone.
| Attribute | 21000-28-05-15-082-01-02 |
|---|---|
| Brand | Bently Nevada |
| Product name | 21000 aluminum proximity probe housing |
| Probe option | 28, 3300 XL 8 mm with multiple approvals |
| Probe cable length | 0.5 m |
| Standoff length | 1.5 in |
| Penetration length | 8.2 in |
| Conduit selection | One 3/4-14 NPT explosion-proof fitting and one plug |
| Mounting thread | 3/4-14 NPT |
| Housing body | Aluminum |
| Probe sleeve | 304 stainless steel |
| Ingress protection | Type 4X / IP66 |
| Typical mass | 1.1 kg |
| Sleeve support rule | Required above 12 in combined length |
The two dimensions sit on opposite sides of the mounting boundary and should not be added as one generic depth value.
The 1.5 in standoff keeps the enclosure away from the machine surface and provides the external portion of the sleeve stack.
The 8.2 in penetration carries the sleeve inside the machine case toward the monitored surface.
The combined length remains below the 12 in support threshold for this code, but any changed sleeve geometry must be rechecked.
The probe connection is made inside the sealed body before the outgoing cable enters the conduit system.
The 0.5 m probe lead is routed back into the aluminum body and connected without changing the adjusted probe depth.
The 01 option assigns one explosion-proof fitting to the cable exit and one plug to the unused threaded opening.
After the internal route is checked, the housing cover closes the Type 4X/IP66 boundary around the connector.
Mounting option 02 gives 21000-28-05-15-082-01-02 a 3/4-14 NPT machine-case connection.
The 28 field sets 21000-28-05-15-082-01-02 for a 3300 XL 8 mm probe with multiple approvals.
21000-28-05-15-082-01-02 has a 1.5 in standoff and an 8.2 in penetration.
The 1.5 in standoff plus 8.2 in penetration of 21000-28-05-15-082-01-02 totals 9.7 in, below the 12 in threshold.
The body of 21000-28-05-15-082-01-02 is aluminum; its adjustable probe sleeve is 304 stainless steel.
The probe cable connects inside 21000-28-05-15-082-01-02 and the outgoing route uses the selected 3/4-14 NPT explosion-proof fitting.
Moore Automation Limited coordinates international deliveries with commercial documents, secure packing information and carrier updates linked to the correct enquiry line. Exact manufacturer and model records remain visible from quotation through dispatch communication.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found