Allen-Bradley · Stratix 5800
Allen-Bradley 1783-MMS10R Stratix 5800 Managed Ethernet Switch
modular Layer 3 managed switch
Product Profile
A modular Layer 3 node serves as the network-control point in a Stratix 5800 architecture, and Allen-Bradley 1783-MMS10R fills that role as the base switch. It combines managed switching, routing capability, copper device connections, and fibre-ready uplink positions in one base platform for an industrial network that needs more than simple edge aggregation.
The model belongs to the Stratix 5800 managed-switch family, where the base unit and any expansion hardware form a defined assembly. Its system position is therefore between field connections and higher-level network paths: it concentrates local Ethernet traffic while giving the project a Layer 3 configuration boundary.
Eight copper Gigabit interfaces support machine or cabinet devices, while two Gigabit SFP positions provide the optical-media side of the architecture. The modular design distinguishes 1783-MMS10R from a fixed unmanaged switch, and the Layer 3 firmware distinguishes it from a Layer 2 base when the system design includes routing.
Technical Specifications
| Specification | 1783-MMS10R |
|---|---|
| Brand | Allen-Bradley |
| Product family | Stratix 5800 managed Ethernet switches |
| Catalog number | 1783-MMS10R Series B |
| Base-port count | 10 |
| Copper ports | 8 x Gigabit RJ45 |
| Fiber positions | 2 x Gigabit SFP |
| Firmware type | Layer 3 |
| Modularity | Modular base; expansion module selected separately |
| Power input, maximum | 12...48 V DC, 4.4 A |
| Power connectors | Pwr A and Pwr B |
| Alarm relay | 30 V DC, 1 A or 48 V DC, 0.5 A |
| Ethernet cabling | Category 5e minimum for RJ45 |
| Mounting | Vertical DIN rail |
| Operating temperature | -40 to 60 °C (-40 to 140 °F) |
| Enclosure type | Open-style |
Expansion and cabinet installation sequence
System focus
Expansion and cabinet installation sequence
If an expansion module is part of the assembly, connect it to 1783-MMS10R before the unit is placed on the DIN rail. The manual specifically separates expansion connection from mounting, which avoids trying to force an assembled module into a rail position with insufficient side clearance.
Reserve access to both Pwr A and Pwr B, the alarm connector and front ports. DIN-rail stop plates are recommended where vibration could cause movement; protective grounding uses at least 4.0 mm² (12 AWG) stranded copper conductor.
- Connect expansion before DIN mounting
- Pwr A and Pwr B remain accessible
- 12 AWG minimum protective ground
Link negotiation and fiber handling
Technical reference
Link negotiation and fiber handling
The eight RJ45 Gigabit ports normally negotiate speed and duplex with the attached equipment. If a connected device does not negotiate, set matching speed and duplex values at both ends; unmatched manual settings can reduce performance or prevent a link.
For the two SFP positions, remove and retain dust plugs, disconnect the fiber LC connector before removing an SFP, and keep optical faces protected. The cabinet plan also needs unrestricted airflow and access for the fiber bend path.
- 8 x Gigabit RJ45
- 2 x Gigabit SFP
- Match manual speed/duplex settings
Frequently Asked Questions
Why does a 1783-MMS10R order need to separate base ports from expansion ports?
1783-MMS10R is a modular base with eight copper 100/1000 ports and two 100/1000 SFP slots. Any expansion module is a separate part of the installed assembly and must not be silently included in the base-port count.
When a plant requires routing, what should be confirmed on 1783-MMS10R?
1783-MMS10R is described with Layer 3 firmware. The routing design should be reviewed against that exact catalog number before configuration begins.
How should an installer approach an expansion module on 1783-MMS10R?
The 1783-MMS10R installation documentation treats connecting an expansion module as a distinct procedure. Mechanical connection and grounding should be completed as part of the cabinet installation before network commissioning.
What fiber-uplink expectation is correct for 1783-MMS10R?
1783-MMS10R provides two 100/1000 SFP slots in addition to its eight copper 100/1000 ports. The SFP positions must be planned as SFP interfaces, not as additional fixed copper outlets.
Can a simple unmanaged-switch setup be assumed for 1783-MMS10R?
No. 1783-MMS10R is an official managed Stratix 5800 base with Layer 3 firmware. Its network preparation should reflect the managed configuration role.
Which cabinet characteristic remains relevant for 1783-MMS10R?
1783-MMS10R is listed as a DIN-rail mounted IP30 device. The enclosure design must provide the protection context appropriate to that IP30 product rating.
Moore Automation
Moore Automation
Catalog-number confirmation
Moore Automation can review a supplied catalog number alongside its stated port and firmware needs. That early check helps a modular base and any expansion hardware remain distinct in the enquiry.
- Original products
- Fast delivery
- 1-year warranty
- 12-hour online response
Related Product List
- B&R 80SD100XD.C0XX-21
- Omron CQM1-OD214
- Mitsubishi Electric MR-J10A1-M
- Allen-Bradley 150-F108NBR
- ABB PMP41-RE13P1C21F1
- Beckhoff BK1250
- HIMA F150-C10E-3-DRT
- SEW-EURODRIVE MC07B0055-5A3-4-00/FSC11B
- B&R SIGA-MCT2
- Omron C200H-TS002
- Mitsubishi Electric FX3G-40MR/ES
- Allen-Bradley 150-F201NBR
- ABB DS50-P1122
- Beckhoff EL1904
- HIMA F300-FM
- SEW-EURODRIVE MC07B0022-2B1-4-00
- B&R 7EX290.50-1
- Omron CJ1W-DRM21
- Mitsubishi Electric GT2103-PMBD
- Allen-Bradley 150-F361NBRD
- ABB DS7-340SX024N0-N
- Beckhoff BKF8/25/260
- HIMA Z58-604-024-2
- SEW-EURODRIVE MDX61B0011-5A3-4-0T
- B&R X20AI2237
- Omron CS1D-PA207R
- Mitsubishi Electric FX3-XTDI80002
- Allen-Bradley 150-F625NBAB
- ABB CIMR-XCACB0P1
- Beckhoff EL6900
- HIMA Z4LA-D1030
- SEW-EURODRIVE MDF60A0022-5A3-4-00
- B&R X20AT6402
- Omron NX-EC0142
- Mitsubishi Electric FX2N-4AD-PT
- Allen-Bradley 150-F108NBRB
- ABB CIMR-J7AZ40P2
- Beckhoff EL7041
- HIMA F300-B5
- SEW-EURODRIVE MDS60A0022-5A3-4-00
- B&R 7CP476.60-1
- Omron CS10-21112116S-1024
- Mitsubishi Electric FX2N-1HC
- Allen-Bradley 150-F201NBRB
- ABB CIMR-JCBA0002BAA
- Beckhoff CX1100-0014
- HIMA F3Z-52008C
- SEW-EURODRIVE MDS60A0300-503-4-00
- B&R 7CP474.60-1
- Omron C200H-AD001
- Mitsubishi Electric FX3G-24MR-DS
- Allen-Bradley 150-F625NBAD
- ABB CIMR-G7C41P5
- Beckhoff EL4004
- HIMA H7CR-B4G
- SEW-EURODRIVE MC07B0030-5A3-4-00
- B&R 8I0IF109.400-2
- Omron CJ1W-CLK23
- Mitsubishi Electric QJ71LP21S-25
- Allen-Bradley 150-F108NBRD
No related record found