Name: Siemens 6ES7513-1FL02-0AB0 | SIMATIC S7-1500 CPU
Brand: SIEMENS
SKU: 2927244
Price: 1 USD
Availability: InStock

Product Summary

Siemens 6ES7513-1FL02-0AB0 is a SIMATIC S7-1500 CPU 1513-1 PN controller for central automation tasks. It combines the S7-1500 program/data memory model with a PROFINET interface for the local control network.

The work memory of Siemens 6ES7513-1FL02-0AB0 provides 450 KB for program and 1.5 MB for data, while a SIMATIC Memory Card is required for loading the project. Its execution figures are 40 ns for a bit instruction, 48 ns for a word instruction, 64 ns for fixed-point arithmetic and 256 ns for floating-point arithmetic.

For cabinet planning, Siemens 6ES7513-1FL02-0AB0 is a 35 × 147 × 129 mm CPU of about 405 g. The engineering project also reserves the retentive memory and block capacity required by the application instead of treating the CPU as a memory-card-free controller.

Black and white 3D line drawing exterior view of Siemens 6ES7513-1FL02-0AB0

Technical Details

Technical itemSpecification

Brand: Siemens
Model: 6ES7513-1FL02-0AB0
Product Name: SIMATIC S7-1500 CPU 1513-1 PN
Country: Germany
Program Work Memory: 450 KB
Data Work Memory: 1.5 MB
Memory Card: SIMATIC Memory Card required; up to 32 GB
Bit Performance: 40 ns
Word Performance: 48 ns
Fixed-Point Performance: 64 ns
Floating-Point Performance: 256 ns
Blocks: 4,000
Retentive Memory: 128 KB
Dimensions: 35 × 147 × 129 mm
Weight: Approx. 405 g

Configuration and Programming

Configuration workflow

Siemens 6ES7513-1FL02-0AB0 is commissioned as an S7-1500 CPU with its Memory Card, hardware configuration and program/data allocation defined together.

Memory-card project

Load the CPU project through the required SIMATIC Memory Card rather than planning the controller as a stand-alone diskless unit.

Block budget

Keep the application within the 4,000-block and retentive-memory limits used by the project.

Execution planning

Use the bit, word, fixed-point and floating-point timing figures when estimating the program cycle.

Monitoring and Control

Control workflow

The control role of Siemens 6ES7513-1FL02-0AB0 depends on the PROFINET station, retained data and CPU diagnostics being visible to the engineering system.

PROFINET station

Assign the CPU to the correct PROFINET network and device identity before downloading the hardware.

Retained values

Reserve the stated retentive memory for values that must survive the configured restart behavior.

Runtime check

Use CPU diagnostics and cycle information to distinguish a program load issue from a field-device issue.

Customer Questions

Why will Siemens 6ES7513-1FL02-0AB0 not load a project without a Memory Card?

Siemens 6ES7513-1FL02-0AB0 requires a SIMATIC Memory Card for the project. Install the correct card and confirm the hardware configuration before treating the load failure as a CPU fault.

How much program and data work memory does Siemens 6ES7513-1FL02-0AB0 provide?

Siemens 6ES7513-1FL02-0AB0 provides 450 KB of program work memory and 1.5 MB of data work memory. Keep block use and retentive allocation within the project limits.

What causes retained values to disappear on Siemens 6ES7513-1FL02-0AB0?

Check the retentive memory assignment, restart mode and Memory Card project for Siemens 6ES7513-1FL02-0AB0. A value outside the retained area is not preserved simply because it exists in a data block.

Why does a PROFINET device remain unreachable from Siemens 6ES7513-1FL02-0AB0?

Verify the PROFINET device name, IP plan, physical link and downloaded hardware for Siemens 6ES7513-1FL02-0AB0. CPU RUN status alone does not prove the network device identity is correct.

How should the 4,000-block limit of Siemens 6ES7513-1FL02-0AB0 be used?

Count the actual application blocks, libraries and retained structures loaded to Siemens 6ES7513-1FL02-0AB0. Leave engineering margin instead of assuming every block in a test project will fit unchanged.

What is the practical effect of the 256 ns floating-point figure on Siemens 6ES7513-1FL02-0AB0?

The 256 ns figure for Siemens 6ES7513-1FL02-0AB0 helps estimate arithmetic execution time. It does not replace a full cycle-time check that includes communications, I/O updates and program branches.

Company Profile

Moore Automation

https://www.mvme.cn

Moore Automation records exact Siemens CPU models with their quantities, destination and technical requirements, alongside multi-brand automation components.

The same enquiry can cover S7-1500 CPUs, signal modules, communication parts, drives, HMI and monitoring hardware without dropping the model identity.

CPU scopeS7-1200 and S7-1500 controllers

Engineering recordExact order number and memory needs

Multi-brand rangePLC, I/O, HMI and drives

Request continuityQuantity and destination retained

Enquiry Details

Contact Moore Automation

ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Siemens 6ES7513-1FL02-0AB0 | SIMATIC S7-1500 CPU Item NO.: 2927244

Siemens 6ES7513-1FL02-0AB0 | SIMATIC S7-1500 CPU 1513-1 PN