Name: Siemens 6ES7292-1AG30-0XA0 / 6ES7292-1AH30-0XA0 | SIMATIC S7-1200 Tin-Plated I/O Terminal Block Spare Parts
Brand: SIEMENS
SKU: 2927246
Price: 1 USD
Availability: InStock

Product Information

Siemens 6ES7292-1AG30-0XA0 and Siemens 6ES7292-1AH30-0XA0 are tin-plated S7-1200 terminal-block spare parts. They preserve the removable field-wiring interface when a terminal block must be replaced without changing the attached I/O electronics.

The order numbers identify different terminal-block arrangements: Siemens 6ES7292-1AG30-0XA0 is the 7-pole version, while Siemens 6ES7292-1AH30-0XA0 is the output-side terminal block supplied as four units with eight screws each. The installed module determines which variant is correct.

For replacement work, Siemens 6ES7292-1AG30-0XA0 or Siemens 6ES7292-1AH30-0XA0 is selected from the exact module connector position. Terminal numbering, conductor order and screw fit are checked before the field circuit is re-energized.

Black and white 3D line drawing exterior view of Siemens 6ES7292-1AG30-0XA0 / 6ES7292-1AH30-0XA0

Product Specifications

Technical item6ES7292-1AG30-0XA06ES7292-1AH30-0XA0

Brand: Siemens
Model: 6ES7292-1AG30-0XA0; 6ES7292-1AH30-0XA0
Product Name: 7-pole tin-plated terminal block; Output-side tin-plated terminal block
Country: Germany
Material / Finish: Tin-plated terminal block
Pole / Screw Arrangement: 7-pole; 4 blocks; 8 screws each
Part Type: S7-1200 spare terminal part
Use: Module field wiring; CPU/module output-side wiring
Selection Basis: Installed connector position
Order Identity: 1AG30; 1AH30

Installation Highlights

Installation sequence

Replacement of Siemens 6ES7292-1AG30-0XA0 or Siemens 6ES7292-1AH30-0XA0 follows a wire-preservation sequence. The objective is to change the removable block without changing conductor identity, terminal order or the connected I/O function.

1 · Isolate and record

Remove CPU and field power, photograph the complete block and label every conductor by terminal number. Confirm the absence of voltage before loosening a screw or withdrawing the block.

2 · Match and transfer

Verify the exact order number, connector position, keying and terminal arrangement. Transfer one conductor at a time to the corresponding position and tighten it without trapping insulation or damaging the strand.

3 · Verify before restart

Inspect seating, screw retention and strain relief, then perform continuity checks with power off. Re-energize only after the terminal map is confirmed and prove the first input or output state individually.

Compatibility and Interoperability

Compatibility boundary

Siemens 6ES7292-1AG30-0XA0 and Siemens 6ES7292-1AH30-0XA0 are passive connection parts whose compatibility is determined by the installed S7-1200 connector geometry and terminal assignment, not by a similar external appearance.

Connector fit

The keyed block must seat fully in the exact module position without force. A block from another pole or screw arrangement is not interchangeable merely because its width looks similar.

Field-wire map

Terminal numbering and conductor order belong to the module's input or output assignment. The replacement preserves that map; it does not reassign addresses or convert an input connector into an output connector.

Commissioning check

Continuity, polarity and the first live channel are checked against the project before service resumes. This confirms that the passive block, connected I/O electronics and field wiring still operate as one path.

Questions & Answers

Why does Siemens 6ES7292-1AG30-0XA0 have a different pole count from 6ES7292-1AH30-0XA0?

The two Siemens terminal-block order numbers identify different connector arrangements. Siemens 6ES7292-1AG30-0XA0 is the 7-pole version, while Siemens 6ES7292-1AH30-0XA0 is the output-side block arrangement.

Can Siemens 6ES7292-1AH30-0XA0 be fitted to any S7-1200 module?

No. Siemens 6ES7292-1AH30-0XA0 is selected by the exact output-side connector position and supplied screw arrangement. Match the block to the installed module before moving conductors.

What is the safest way to replace Siemens 6ES7292-1AG30-0XA0?

Power down the relevant station, label every conductor, confirm the 7-pole Siemens 6ES7292-1AG30-0XA0 order number and verify continuity before reapplying field power.

Why can a visually similar terminal block cause an I/O fault?

A similar-looking block may have a different pole sequence or keying. Using the exact Siemens 6ES7292-1AG30-0XA0 or Siemens 6ES7292-1AH30-0XA0 preserves the module's intended terminal map.

Does Siemens 6ES7292-1AH30-0XA0 change the I/O program?

The terminal block is a connection spare and does not add I/O logic. The Siemens 6ES7292-1AH30-0XA0 replacement still requires the physical wire order and module connector to match the existing project.

What should be checked after replacing Siemens 6ES7292-1AG30-0XA0 or 6ES7292-1AH30-0XA0?

Check terminal retention, conductor order, continuity and the first live input or output state. Keep the exact Siemens order number with the maintenance record so the next replacement uses the same connector variant.

Brand Supply Scope

Moore Automation

https://www.mvme.cn

Moore Automation covers Siemens terminal parts, signal boards, CPUs and I/O together with ABB, Rockwell Automation, Schneider Electric, Mitsubishi, Omron, GE and other automation brands.

The supply record keeps the exact spare-part model, installed module position, quantity and destination in one enquiry so passive connector parts are not confused with active I/O hardware.

Terminal partsTin-plated blocks and connector spares

PLC familiesSiemens S7-1200 and S7-1500

Brand coverageABB, Rockwell, Schneider and more

Part traceabilityExact model and position retained

Contact Information

Contact Moore Automation

ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Siemens 6ES7292-1AG30-0XA0 / 6ES7292-1AH30-0XA0 | SIMATIC S7-1200 Tin-Plated I/O Terminal Block Spare Parts Item NO.: 2927246

Siemens 6ES7292-1AG30-0XA0 / 6ES7292-1AH30-0XA0 | SIMATIC S7-1200 Tin-Plated I/O Terminal Block Spare Parts