Locate the support
Place support close enough to the probe end of 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 to restrain the long sleeve.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 probe housing assemblies |
| Item NO. | 2915746 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-10-10 |
Bently Nevada 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 are 31000 proximity probe housing assemblies that position an approved 3300 XL 8 mm probe through a machine case. Their 16.5 in stainless-steel sleeve carries the probe toward the measurement point while the PPS housing keeps the probe connection outside the machine.
Cable-entry hardware separates the two 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 configurations. The E01 arrangement provides one conduit fitting and closes the other two openings, whereas E02 provides two fittings and closes one opening; the probe, lead, sleeve reach, and mounting thread remain unchanged.
Because the unsupported reach of 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 exceeds 12 in, the sleeve requires an additional support near the probe. That support controls resonance at the internal end while the external enclosure preserves access to the connector and gap-adjustment hardware.
| Technical Item | 31000-28-10-00-165-01-02 | 31000-28-10-00-165-02-02 |
|---|---|---|
| Brand | Bently Nevada | |
| Product Family | 31000 | |
| Product Type | Proximity probe housing assembly | |
| Mounting Standard | English | |
| Probe | 3300 XL 8 mm; multiple approvals | |
| Probe Cable Length | 1.0 m (39 in) | |
| Standoff Adapter | None | |
| Probe Penetration | 16.5 in | |
| Fitting Quantity | One | Two |
| Unused-Hole Plugs | Two | One |
| Fitting Thread | 3/4-14 NPT | |
| Mounting Thread | 3/4-14 NPT | |
| Housing Material | Conductive glass-reinforced PPS | |
| Sleeve Material | AISI 304 stainless steel | |
| Mechanical Rating | Type 4X; IP66 | |
| Probe Temperature Range | -51 to 177 deg C | |
| Additional Sleeve Support | Required near the probe | |
| Typical Weight | 1.2 kg (2.6 lb) | |
| Retaining-Nut Torque | 29.4 N-m (260 in-lb) | |
| Explosion-Proof Housing | No | |
The 16.5 in sleeve in 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 crosses the published length threshold for extra support near the probe.
Place support close enough to the probe end of 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 to restrain the long sleeve.
Support for 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 must not prevent the ±0.5 in penetration adjustment.
After supporting 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02, set the probe gap before the housing is closed.
The E field separates the external cable-entry hardware of 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 without changing probe reach.
The first 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 model provides one 3/4-14 NPT fitting and seals two unused openings.
The second 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 model provides two fittings and one plug.
Both 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 models retain the same approved 8 mm probe and 1.0 m lead.
The required number of housing cable entries decides between 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02. E01 has one fitting and E02 has two; their probe and sleeve reach are otherwise shared.
The 16.5 in penetration of 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 exceeds the 12 in threshold. Support near the probe limits sleeve resonance without replacing correct gap adjustment.
The supplied 3/4-14 NPT fitting arrangement on 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 supports the documented hardline conduit or metal-tubing entry. Confirm whether one or two entries are required before selecting E01 or E02.
For 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02, record the full external housing catalog number before installation. The long sleeve can place the probe cable label inside the assembly where it is not easy to read later.
No. C00 in 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02 removes the external standoff, while D165 still specifies the 16.5 in penetration dimension. Treat the two fields separately.
After adjusting 31000-28-10-00-165-01-02 / 31000-28-10-00-165-02-02, reconnect the probe cable, tighten the retainer and retaining nut, and secure the cover and all unused-hole plugs. The cable entries must match the selected E01 or E02 package.
Moore Automation combines model-level enquiry handling with coordinated packing and international shipment communication, keeping the exact requested suffix connected to the order record.
Send the complete model, quantity, and destination for a precise quotation.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found