Product Overview

Meggitt Vibro-Meter XMVS16 600-003 is the VM600 extended monitoring module for vibration. It processes the dynamic measurement set used for high-performance machinery-vibration monitoring and analysis within the VM600 system.

The XMVS16 600-003 processing module works with an associated XIO16T input/output module. The pair acquires dynamic and tachometer signals, performs the configured monitoring calculations and presents the resulting data through the VM600 rack interfaces.

For XMVS16 600-003, the VM600 raw-bus capability is not available on this designation. Dynamic vibration signals therefore follow the associated XIO16T connection into the processing module and the configured VibroSight monitoring path.

VM600 input/output card technical illustration

Technical Specifications

Technical item	Specification
Brand	Meggitt Vibro-Meter
Product type	Extended monitoring module for vibration
Product family	VM600 XMVS16 + XIO16T
Ordering number	600-003
Official designation	XMVS16
Application package	Vibration monitoring
Associated module	XIO16T
Dynamic acquisition	Extended vibration channels
Tachometer relation	Associated tachometer inputs
Raw bus	Not supported on XMVS16
Processing path	VM600 rack and VibroSight
Signal source	Associated XIO16T field connections
Module format	VM600 plug-in module
System role	Extended condition monitoring
Dynamic channels	16 independent
A/D converter	24 bit
Maximum sampling	98 kHz
Dynamic voltage	−30 to +30 V; input impedance ≥200 kΩ
Dynamic current	−25 to +25 mA; 100 Ω resistor
Tachometer channels	4 independent
Speed range	1 to 100,000 RPM
Speed resolution	5 ns
Accuracy	1% FSD at 0–55°C; 2% FSD at 0–65°C
Tachometer input	Channels 1/2 voltage and current; channels 3/4 voltage

Product Functions: Vibration Processing

XMVS16 600-003 processes the dynamic signals delivered by the associated XIO16T for extended vibration monitoring.

Dynamic inputs

The associated XIO16T presents the vibration signals to the processing module.

Condition calculations

XMVS16 performs the configured monitoring calculations for the vibration channels.

Monitoring output

The processed results move through the VM600 rack and configured VibroSight path.

Operating Characteristics: Raw-Bus Boundary

XMVS16 600-003 has a defined raw-bus boundary that changes how dynamic signals are routed through the module pair.

No raw bus

The XMVS16 designation does not support sharing dynamic signals through the VM600 raw bus.

XIO16T wiring

All dynamic vibration inputs are wired to the associated XIO16T connectors.

Rack delivery

The processed channel data continues through the VM600 rack interface.

Frequently Asked Questions

Why is 600-003 identified as XMVS16 rather than XMV16?

The official VM600 ordering information identifies 600-003 as XMVS16. The supplied label XMV16 600-003 is therefore corrected on this page to the complete designation XMVS16 600-003.

Which module supplies the field signals to XMVS16 600-003?

The associated XIO16T module supplies the dynamic and tachometer signal connections for XMVS16 600-003. The processing module does not replace the XIO16T field connector.

Can XMVS16 600-003 share dynamic signals over the VM600 raw bus?

No. The XMVS16 designation does not support the VM600 raw bus for sharing dynamic vibration signals. The dynamic inputs must be wired to the associated XIO16T connectors.

What does XMVS16 600-003 send to VibroSight?

XMVS16 600-003 sends processed vibration-monitoring data through the VM600 rack and its configured communication path to the VibroSight monitoring environment.

How should a technician trace a missing vibration channel on XMVS16 600-003?

Start at the associated XIO16T connector, follow the channel into the XMVS16 processing path and then verify the rack-side data route. This distinguishes field wiring from processing or communication issues.

Is 600-003 the same record as an XMV16 600-003 card?

No. The ordering record uses the official designation XMVS16 600-003. The corrected name should be retained in the model field and in the rack documentation.

Shipping Services

Moore Automation

https://www.mvme.cn/

Moore Automation records the submitted model and quantity with the destination information used for shipment communication.

Packing recordThe logistics note remains tied to the requested industrial part rather than to a shortened product-family label.

Destination recordThe logistics note remains tied to the requested industrial part rather than to a shortened product-family label.

Shipment handoffThe logistics note remains tied to the requested industrial part rather than to a shortened product-family label.

Product Name	Meggitt Vibro-Meter XMVS16 600-003 \| VM600 extended monitoring module for vibration
Item NO.	2919903
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	VIBRO METER
Brand	OTHER PRODUCTS
Creation Time	2026-10-15

Meggitt Vibro-Meter XMVS16 600-003 | VM600 extended monitoring module for vibration Item NO.: 2919903

Meggitt Vibro-Meter XMVS16 600-003 | VM600 extended monitoring module for vibration