- Confirm that the controller is an RX3i CPU running release 2.90 or later. IC695MDL754 is not used with a Series 90-30 PLC CPU.
- Install the module in an available RX3i I/O slot.
- Wire outputs 1–16 and 17–32 as their separate 16-point field groups, connecting each group to its own DC+ and DC− field-power terminals.
GE IC695MDL754 32-Point DC Output Module
12/24 VDC positive-logic outputs, arranged as two isolated 16-point groups for RX3i control architectures.
Product Overview
The GE IC695MDL754 is a 32-point DC discrete output module for the PACSystems RX3i platform. It uses positive-logic output switching and divides the field interface into two isolated groups of 16 outputs.
IC695MDL754 installs in any RX3i I/O slot and is used with an RX3i CPU release 2.90 or later. The module exchanges commanded output states over the RX3i backplane while its field circuits are supplied from an external 12 to 30 VDC source.
Each output point is rated for 0.75 A. The module combines optical field-to-backplane isolation with group-to-group isolation, separating the field wiring from the backplane and the two output groups. It is intended for DC field loads within the published voltage, current, and thermal limits.
Technical Data
BrandGE
Brand headquartersUnited States
ModelIC695MDL754
Product type32-point DC output module
Rated voltage12/24 VDC nominal
Output voltage range10.2 to 30 VDC
Output arrangement32 points; two isolated groups of 16
LogicPositive logic
Output current0.75 A per point
External power+12 to +30 VDC; 12/24 VDC nominal
Backplane consumption300 mA maximum from the 5 V bus
Module ID0x059h
Output voltage drop0.3 VDC maximum
Output leakage0.1 mA maximum
Response time0.5 ms maximum, on and off
Isolation250 VAC continuous; 1500 VAC for 1 minute
Installation
Diagnostics
- If only part of the field wiring is affected, first identify whether the issue is in the 1–16 or 17–32 output group, then check that group’s DC+ and DC− field-power connections.
- For an output that does not respond as commanded, check the associated field load and wiring for a short-circuit condition; IC695MDL754 provides electronic short-circuit protection.
- When the application operates at 30 VDC in a warm enclosure, review the RX3i manual’s published derating curve before increasing the output loading.
Configuration boundary: IC695MDL754 is for an RX3i system and requires an RX3i CPU release 2.90 or later; it is not for use with a Series 90-30 PLC CPU.
Product FAQ
I am replacing a failed IC695MDL754 module. How do I avoid a controller compatibility problem?
Confirm the order code is IC695MDL754 and that the host is an RX3i CPU at release 2.90 or later. IC695MDL754 is not for use with a Series 90-30 PLC CPU.
A group of devices driven by IC695MDL754 is not actuating. Where should I begin?
For IC695MDL754, separate the affected points into the 1–16 or 17–32 group, then verify the corresponding group’s DC+ and DC− field-power connections before investigating individual loads.
An IC695MDL754 output does not follow the controller command after wiring. What should be checked?
For IC695MDL754, review the field-device wiring and load on that output point, then confirm the output belongs to the intended 16-point group. This keeps field-side troubleshooting separate from the RX3i backplane connection.
How should I respond when a shorted field load is suspected on IC695MDL754?
Isolate the field load connected to IC695MDL754 and inspect its cable path and wiring before returning it to service. IC695MDL754 includes electronic short-circuit protection, but the field-side cause still needs to be corrected.
What should I consider before running IC695MDL754 at 30 VDC in a warm cabinet?
For IC695MDL754, use the published RX3i derating curve for the expected ambient temperature and output loading. The manual identifies derating above 42 °C when operating at 30 VDC.
How can I plan a like-for-like IC695MDL754 spare for a critical machine?
Record the full IC695MDL754 model number, the RX3i CPU release, and which field devices are connected to each 16-point output group. This gives maintenance staff the key compatibility and wiring context for replacement planning.
Moore Automation Supply Focus
Moore Automation supplies industrial automation parts for control-system maintenance and replacement planning, including PLC, DCS, HMI, drive, and related automation components.
- Original products
- Fast delivery
- 1-year warranty
- 12-hour online response
Recommended Products
- Siemens 6RB2000-0NB00
- Siemens 6AF7001-0BC
- Allen-Bradley 1734-APB
- Siemens 3RG9010-0AA00
- Siemens 3TB5417-0A
- Siemens 6SN1123-1AA00-0AA0
- Siemens 7KM3220-1BA01-1EA0
- Allen-Bradley 1783-US7T1F
- Siemens 6ES5101-8UC13
- Siemens 6ES5945-7UA23
- Siemens 7TR6200-0/BB
- Siemens 6ES5431-8FA11
- ABB A185-30
- Siemens 6GK7342-5DA03-0XE0
- ABB SSR20 2TLA010051R0000
- ABB SSR10P 2TLA010050R0001
- ABB Bailey INNIS01
- Siemens 6FX2001-2PC50
- Siemens 6XV1830-7BN30-0ZR0
- Siemens 6EV3054-0FC
- Siemens M71291-D1111-B500
- Siemens 3RF2440-1AC55
- Siemens 6SE7090-0XP87-3CR0
- Siemens 6GK1502-3CB00
- Siemens 6GK5907-4PA00
- Siemens 6ES5955-3NA12
- Siemens 3SE5322-0SD21
- Siemens 6FX8002-2DC20-1CK0
- Siemens 6ES7148-4EA00-0AA0
- Siemens 6SE7018-0ES87-2DC0
- Siemens 3RT1054-1NP36
- Siemens 6ES5762-2CS11
- Allen-Bradley 800T-FXT6A5
- Siemens 6ES5460-4UA13
- Siemens 6EP1252-0AA00
- Siemens 3RA1423-8XC21-1BB4
- Siemens 6ES5955-3NC13
- Siemens 3RB3036-2WD0
- Siemens 3RT1044-1BB44
- Siemens 6ES7545-5DA00-0AB0
- ABB DC532 1SAP240100R0001
- Siemens 3RT1135-1BB40
- Allen-Bradley 1756-ENBT
- Siemens 6FQ3182-0A
- GE IC200ALG620-CB
- Allen-Bradley 140U-H6C3-D11
- Allen-Bradley 1756-M02AE/A
- Siemens 3RV2041-4MA10
- Siemens 8GF9318-2
- Siemens 3RV2032-4DA10
- Siemens 3RT2038-1KB40
- Siemens 3VF3211-1BU41-2HB2
- Siemens 3RK1304-0HS00-6AA0
- Siemens 6GT2812-2GB08
- ABB NTFB01
- ABB IMCIS02
- ABB 2TLA042022R3400
- ABB DX571 1TNE968902R2302
- Siemens 6ES7972-0CB35-0XA0
- Allen-Bradley 100-C09ZJ10
No related record found