Selection boundary
Electronic fusing responds to short-circuit current.
GE Fanuc 115 VAC
GE Fanuc IC660BBD100 Genius 115 VAC Grouped I/O Block
Eight-circuit 115 VAC block configurable as inputs, outputs or a mixed I/O group.
01Model Profile
IC660BBD100 is the earlier version of the Genius eight-circuit grouped 115 VAC I/O block. Each point can be assigned as an input or output, allowing an eight-input, eight-output or mixed configuration within one block.
Input circuits support selectable filtering and tristate open-wire supervision when the required monitoring resistor is used. Output circuits include electronic protection for short circuit, overload and overtemperature conditions.
The later IC660BBD101 is documented as backward compatible and may replace IC660BBD100. The older BBD100 uses a different internal input capacitor and may require added resistance with loads below 50 mA.
Circuits8 configurable I/O
Nominal voltage115 VAC
Supply range93-132 VAC, 47-63 Hz
Output current2 A RMS per circuit
02Technical Data
Circuits8 configurable I/O
Nominal voltage115 VAC
Supply range93-132 VAC, 47-63 Hz
Output current2 A RMS per circuit
Block current15 A maximum at 35 °C
Input filter10-100 ms selectable
Block isolation1500 V
Dimensions224.4 × 88.9 × 100.0 mm
Weight1.8 kg
Documented successorIC660BBD101
03Circuit Mode Assignment
- Configure all points as inputs, all as outputs, or any mixed combination.
- A mixed block exchanges one input byte and one output byte each bus scan.
- Output feedback returns the actual point state to the controller.
04Protection and Small Loads
Configuration point
Optional no-load and overload supervision protect output wiring and devices.
Installation check
BBD100 installations with loads below 50 mA may require added resistance.
05Replacement
Documented relationship
IC660BBD101 is the documented backward-compatible replacement.
06FAQ
How does IC660BBD100 implement its Circuit Mode Assignment function?
Configure all points as inputs, all as outputs, or any mixed combination.
Why must Protection and Small Loads be reviewed for IC660BBD100?
Electronic fusing responds to short-circuit current.
Which Grouped I/O circuit modes arrangement applies to IC660BBD100?
Eight identical 115 VAC circuits may be assigned as inputs or outputs.
Which Circuits and Nominal voltage values define the Grouped I/O circuit modes configuration IC660BBD100?
Circuits: 8 configurable I/O; Nominal voltage: 115 VAC.
Before commissioning IC660BBD100, which Circuit Mode Assignment check matters most?
A mixed block exchanges one input byte and one output byte each bus scan.
Which replacement relationship is documented for IC660BBD100 when reviewing Circuit Mode Assignment?
IC660BBD101 is the documented backward-compatible replacement.
No related record found