Remove power
De-energize the rack and every externally supplied field circuit before removing a faceplate or module.
Series Six Output and Motion Hardware
GE Fanuc IC600BF908 / IC600BF914 / IC600BF915 Series Six Modules
A combined reference for a 24 Vdc source output, a six-point reed-relay output and a Type 1 single-axis positioning module.
IC600BF90824 Vdc source output module
IC600BF914Reed-relay output module
IC600BF915Type 1 axis positioning module
Product Description
IC600BF908, IC600BF914 and IC600BF915 are Series Six rack modules, but they do not provide interchangeable functions. IC600BF908 is an eight-point 24 Vdc source output used to switch dc field loads. IC600BF914 is a six-point Form C mercury-wetted reed-relay output for separately fused ac or dc circuits. IC600BF915 is an intelligent Type 1 Axis Positioning Module that closes a single-axis motion loop with resolver feedback.
The two output modules translate CPU output-table states into field switching. IC600BF908 is selected where sourcing semiconductor outputs match the load circuit. IC600BF914 instead provides isolated relay contacts with per-circuit normally-open or normally-closed selection and optional RC suppression for low-level instrumentation service.
IC600BF915 exchanges commands and return data through 32 consecutive inputs and outputs. It is programmed and monitored from the Workmaster environment and coordinates resolver-based position or velocity control with the Series Six application. Its power, addressing, feedback and servo connections therefore require a different commissioning record from either discrete output module.
Technical Specifications
| Specification | IC600BF908 | IC600BF914 | IC600BF915 |
|---|---|---|---|
| Brand | GE Fanuc | ||
| Product Type | 24 Vdc source output module | Reed-relay output module | Type 1 axis positioning module |
| Country | United States | ||
| System Family | Series Six / Series Six Plus | ||
| Primary Function | Switches dc field loads from 24 Vdc source outputs | Switches isolated ac or dc loads through Form C contacts | Single-axis position or velocity control with resolver feedback |
| Channels / Points | 8 outputs in two isolated groups of four | 6 relay outputs | 1 controlled axis; 32 consecutive input and 32 output references |
| Field Interface | 24 Vdc source circuits | 250 Vac/dc, 100 VA maximum contact service | Resolver feedback and servo/stepper axis interface |
| Circuit Features | Solid-state sourcing outputs | Per-output fuse and coil LED; NO/NC selection | Setup, move, discrete and special command exchange |
| Isolation | Grouped field-output isolation | 750 V maximum field-to-controller isolation | Intelligent motion interface in a CPU or high-capacity I/O rack |
| +5 V Load | 7 units | 13 units | 23 units |
| +12 V Load | No listed load | No listed load | 7 units |
| -12 V Load | No listed load | No listed load | 3 units |
| Installation Basis | Match source-output wiring and group commons | Choose contact state and RC protection per circuit | Set motion parameters and verify resolver direction before automatic operation |
Product Functions
IC600BF908 sources 24 Vdc to eight field outputs arranged as two isolated groups, making it suitable for compatible dc solenoids, indicators and interface loads.
IC600BF914 updates six Form C relay outputs during the Series Six I/O scan. Each output is individually fused and has a coil-status indicator.
IC600BF915 performs single-axis motion control with resolver feedback and passes setup, move, discrete and status data through allocated input/output references.
Adjacent catalog numbers do not imply substitution: the three modules differ in wiring, field energy, rack load and commissioning method.
Installation and Rack Planning
Record configuration
Capture slot, I/O references, output commons, relay jumpers, or IC600BF915 motion parameters as applicable.
Match the function
Reconnect IC600BF908 source circuits, IC600BF914 relay contacts, or IC600BF915 resolver/axis signals only to the same documented function.
Commission safely
Test outputs with loads controlled and prove resolver direction, limits and command response before returning an IC600BF915 axis to production.
Product FAQ
Can IC600BF908 replace IC600BF914 or IC600BF915?
No. IC600BF908 is a 24 Vdc source output, IC600BF914 is a reed-relay output and IC600BF915 is an intelligent motion module.
What should be recorded before removing IC600BF914?
Record each field conductor, the selected normally-open or normally-closed state, the RC-protection jumper choice and the fuse condition for all six circuits.
Why does IC600BF915 reserve consecutive I/O references?
Commands, setup data, move data and return status are exchanged between CPU logic and the positioning module through 32 inputs and 32 outputs.
What feedback type identifies IC600BF915?
IC600BF915 is the Type 1 Axis Positioning Module for resolver feedback. The Type 2 module uses a different catalog number and encoder feedback.
How should IC600BF908 be tested after replacement?
With a controlled load condition, verify the two group commons, command each mapped point and confirm that every output sources the expected 24 Vdc circuit.
Moore Automation
Industrial Parts Supply Scope
Moore Automation works with control-system components ranging from I/O and communication boards to processors, power supplies, drives and operator panels. This broad scope supports maintenance enquiries that include equipment from more than one automation platform.
Available service commitments include fast delivery, a one-year warranty and a stated 12-hour online response window.
Recommended Products
Bosch 054344-106
Indramat 1.1-050-300W0
Eaton 500-POW
Siemens 6DP1210-7AA
ABB 3DDE300412
Honeywell UDC2000
Emerson 00027
Omron 61F-GP
Mitsubishi A2NCPU
Schneider Electric 54440
Phoenix Contact 2810913
Bosch 3842528806
Indramat 1.1-050-300W1
Eaton 278756
Siemens IPC427D
ABB 3DDE300415
Honeywell 620-0010
Emerson 00028
Omron 3G2A3-OC221
Schneider Electric LRD08
Phoenix Contact 2719234
Bosch 25-TD
Indramat 01-00
Eaton N3-630
Siemens 6AV4012-0AA20-0AB0
ABB M6010H
Honeywell 04230-A-1001
Emerson MP25A4R
Omron G3PA-420B
Schneider Electric 15336
Phoenix Contact 2701506
Bosch 1070075973-105
Indramat 1.1-150-300-W1-220
Eaton M-12-10
Siemens 530-1BE00-7HX1
ABB 500-11
Honeywell 2108B2001N
Emerson A6210
Omron WLCA2
Schneider Electric 15963
Phoenix Contact 3211933
Bosch 047839-406
Indramat 90B0ND4C110B1WJ518LS0
Eaton ZB12-10
Siemens 10031EB422AB4-Z
ABB SB9336E
Honeywell 942-M3A-2D-1G1-220S
Emerson GB833487
Omron MY4NJ
Schneider Electric 31172
Phoenix Contact 2784146
Bosch 047839-313
Indramat 1.2-100-300-W1
Eaton ER-31
Siemens 317-2FK14-0AB0
ABB PM861
Honeywell 620-3090
Omron 3G3RX-A4185-E1F
Schneider Electric 111020058
Phoenix Contact 1201044
No related record found