Home>GE>Emerson / GE Fanuc IC200BEM103 / IC200BEM104 VersaMax Network Communication Modules

Emerson / GE Fanuc IC200BEM103 / IC200BEM104 VersaMax Network Communication Modules Item NO.: 2907225

Write a Review

US$ 1.00

Quantity: Stock ( 28 )

Request Price & AvailabilitySend the part number and quantity. Our team will confirm stock, condition, lead time and the best quotation.

MOQ: 1 piece
International shipping
1-year warranty on eligible items
Fast response during business hours

Product Name	Emerson / GE Fanuc IC200BEM103 / IC200BEM104 VersaMax Network Communication Modules
Item NO.	2907225
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	GE
Brand	GE
Creation Time	2026-09-10

Emerson · GE Fanuc VersaMax

Emerson / GE Fanuc IC200BEM103 / IC200BEM104 VersaMax Network Communication Modules

Product Overview

The IC200BEM103 and IC200BEM104 are Emerson VersaMax network communication modules (formerly GE Fanuc). The IC200BEM103 is a DeviceNet Network Control Module that can be configured to operate as a master, as a slave, or as both simultaneously, exchanging up to 512 bytes of input and 512 bytes of output data with other devices on the DeviceNet network.

The IC200BEM104 is an AS-Interface Network Master Module that conforms to the AS-Interface Specification for the master AS-Interface protocol. It connects a VersaMax PLC or I/O station NIU to an Actuator-Sensor network, supporting communications with up to 31 slave devices and exchanging up to 4 bits of input data and 4 bits of output data per slave address.

Both modules operate on the VersaMax platform and allow the CPU to read and write network data as though it were conventional bit- and word-type I/O data. Configuration is performed through GE Proficy Machine Edition software, the same platform used for programming VersaMax CPUs.

Specifications

Parameter	IC200BEM103	IC200BEM104
Brand	Emerson / GE Fanuc
Series	VersaMax
Type	DeviceNet Network Control Module	AS-Interface Network Master Module
Country	United States
Protocol	DeviceNet	AS-Interface (AS-i)
Operating Mode	Master, Slave, or both simultaneously	Master
Max Slave Devices	40 devices	31 standard slaves + 1 diagnostic
Data Exchange	512 bytes input / 512 bytes output	4 bits input / 4 bits output per slave
Data Rate	125 / 250 / 500 Kbaud	167 kbit/s (fixed)
Network Voltage	24 VDC	30 VDC (via AS-i cable)
Power Consumption	140 mA @ 5V DC backplane	140 mA @ 5V DC backplane
Connector Type	5-pin open style	5-pin open terminal
Status LEDs	OK, MOD, NET	Slave status, voltage, short circuit, address conflict
Operating Temperature	0° to 60° Celsius
Mounting	DIN-Rail or panel mount
Certifications	UL, CE, CSA

Network Communication Features

IC200BEM103 DeviceNet Features

Configurable as master, slave, or both simultaneously
Operates as Group 2 Only Client (master)
Group 2 Only or UCMM-capable Server (slave)
Exchanges 512 bytes input and 512 bytes output
Supports 125/250/500 Kbaud data rates
Duplicate address detection

IC200BEM104 AS-i Features

Conforms to AS-Interface Specification V2.11
Supports up to 31 standard slaves + 1 diagnostic
4 bits input / 4 bits output per slave address
167 kbit/s fixed baud rate
Channel-level diagnostics with LED indicators
Auto address assignment and online replacement

Configuration & Installation

The IC200BEM103 is configured through GE Proficy Machine Edition software. The module uses a 5-pin open-style connector for DeviceNet network connection. For best performance, use shielded pair cable with a center drain wire. The module supports different data rates of 125, 250, and 500 Kbaud.

The IC200BEM104 connects to the AS-Interface network through a 5-pin open terminal. The AS-i flat cable simultaneously carries 30 VDC power and 167 kbit/s signal, reducing wiring by up to 50% and cabinet space by 30%. The module supports auto address assignment and online replacement, allowing slave devices to be replaced within 10 seconds in case of failure.

Both modules mount directly onto VersaMax carriers and communicate with the CPU through the backplane. The VersaMax PLC CPU can read and write network data as conventional bit- and word-type I/O data, simplifying programming and integration.

FAQ

What is the difference between IC200BEM103 and IC200BEM104?

The IC200BEM103 is a DeviceNet Network Control Module that can operate as master, slave, or both simultaneously, exchanging up to 512 bytes of input/output data. The IC200BEM104 is an AS-Interface Network Master Module that connects to Actuator-Sensor networks, supporting up to 31 slave devices with 4 bits input/output per slave.

What data rates does the IC200BEM103 support?

The IC200BEM103 supports DeviceNet communication at 125 Kbaud, 250 Kbaud, and 500 Kbaud. The maximum trunk line length varies by baud rate: 500m at 125 Kbps, 250m at 250 Kbps, and 100m at 500 Kbps.

How many slave devices can the IC200BEM104 support?

The IC200BEM104 supports up to 31 standard AS-Interface slave devices plus 1 diagnostic slave (32 addresses total). Each slave exchanges 4 bits of input data and 4 bits of output data per cycle.

What software is required to configure the IC200BEM103 or IC200BEM104?

Both modules are configured through GE Proficy Machine Edition software, the same platform used for programming VersaMax CPUs and managing I/O configurations.

What are the power requirements for the IC200BEM103 and IC200BEM104?

Both modules consume 140 mA from the 5V DC backplane. The IC200BEM103 also uses 24 VDC for DeviceNet network power, while the IC200BEM104 uses 30 VDC supplied via the AS-i cable for the Actuator-Sensor network.

About Moore Automation

Moore Automation helps industrial facilities source Emerson VersaMax network communication modules and legacy GE Fanuc automation components for control system maintenance and expansion. We understand the importance of matching exact catalog numbers when replacing network modules or adding communication capabilities to existing VersaMax racks.

Specialized in Emerson / GE Fanuc VersaMax modules
Support for discontinued DeviceNet and AS-i module sourcing
Fast response for critical control system needs
Cross-reference assistance for revision compatibility

Recommended Products

Emerson IC200BEM103

Emerson IC200BEM104

Emerson IC200BEM002

Emerson IC200BEM102

Emerson IC200CHS003

Emerson IC200CHS005

Emerson IC200ALG261

Emerson IC200ALG321

Emerson IC200PWR001

Emerson IC200PWR002

Emerson IC200MDL640

Emerson IC200MDL650

Emerson IC200CPU001

Emerson IC200CPU005

Emerson IC200GBI001

Emerson IC200ETM001

Emerson IC693CPU374

Emerson IC694MDL645

Emerson IC695CPE330

Emerson IC697CPX935

Pilz PNOZ X6 24VDC

Pilz PNOZ S30 C 24-240VACDC

Pilz PZE X4 24VDC 4N/O

Pilz PNOZ X10.1

Pilz PNOZ 1 24VDC 3S 1O

SICK WT34-B410

SICK WT34-R220

SICK WTB12-3P2431

SICK WL12-3P2431

SICK WT150-P460

SICK WL12G-3B2531

SICK WTB26I-24161120A00

SICK WTF12-3P2441

SICK WTB16P-24161120A00

SICK WT24-2R210

SICK WL11-2P2430

SICK WT36-P710

SICK WLL12-B5281

SICK WL12-2N430

SICK WT27L-2F430

Festo DPA-63-10

Festo MSQB20H2

Festo MSQB30H3

Festo ADN-12-10-A-P-A

Festo DSN-20-40-PPV

Festo ADVU-25-32-P-A

Festo ADVU-20-50-P-A

Festo DSNU-25-10-PPV-A

Festo DSNU-16-50-P-A

Festo DSNU-12-10-P-A

Festo ADVU-40-2-A-P-A

Festo ADVU-25-50-P-A

Festo DSN-20-40-P-A

Festo DSNU-32-50-PPV-S2

Festo DSNU-16-40-PPV-A-S2

Festo ADN-20-70-A-P-A

Festo ADN-20-80-A-P-A

Festo ADN-12-60-I-P-A

Festo ADVU-32-80-A-P-A

Festo ADV-20-15-A

Contact Us

Manager

Leonia

sales@mvme.cn

+8618030175807

No related record found