Bently Nevada · Orbit 60 system coordination

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 | Orbit 60 System Interface Module Variants

Name: Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 | Orbit 60 System Interface Module
Brand: Bently Nevada
SKU: 2926048
Price: 1 USD
Availability: InStock

Three Ethernet portsFour system contactsTwo approval variants

Product file60R/SIM01System Interface Module00 = None · 02 = Multi

Product Information

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 identifies two Orbit 60 System Interface Module executions that coordinate configuration, system-level controls, status indications, and communication between Orbit Studio and the chassis. Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 uses one slot adjacent to the power-input position and provides the common system interface rather than a sensor measurement channel.

Through three copper Ethernet ports, four system contacts, and a protection-fault relay, Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 connects engineering access with Trip Multiply, Alarm Inhibit, Reset, and Configuration Lock functions. Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 also applies signed-firmware, certificate-identity, and user-role controls to the configuration path.

The functional difference inside Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 is the approval field: 60R/SIM01-00-0 has no hazardous-area certification, while 60R/SIM01-02-0 carries the Multi approval execution. Both Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 variants retain the 0 no-SIL field because the SIM does not itself perform the sensor-protection measurement function.

Technical Data

Technical Item	60R/SIM01-00-0	60R/SIM01-02-0
Brand	Bently Nevada
Product Name	Orbit 60 System Interface Module
Country	United States
System Family	Orbit 60 Series
Base Ordering Code	60R/SIM01 = System Interface Module
Hazardous-Area Approval	00 = No hazardous-area certification	02 = Multi (CSA, ATEX, IECEx)
SIL Level	0 = No SIL
Chassis Occupancy	One slot adjacent to the Power Input Module
Ethernet Ports	3 copper RJ45 ports
Ethernet Rates	1000 / 100 / 10 Base-T
Maximum Copper Length	100 m per Ethernet run
System Contacts	4 — Trip Multiply, Alarm Inhibit, Reset, Configuration Lock
Protection Fault Relay	Solid-state SPDT; 1 to 125 Vdc; 0.01 to 125 mA; 250 V isolation
Typical / Maximum Power	7.6 W / 10.9 W
Configuration Security	Run/Program key, signed firmware, certificate identity, roles and rights
Status Indications	OK, LINK, ATTN, INHB, FAULT

System Coordination and Security

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 is the controlled entry point for Orbit Studio configuration and system-level commands, with physical and software controls around that access.

01 · Configure

Orbit Studio transfer

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 receives the prepared chassis configuration and distributes the relevant settings to installed modules.

02 · Lock

Run and Program control

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 uses its configuration-lock contact or key position to permit changes in Program mode and block them in Run mode.

03 · Protect

Trusted update path

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 applies signed firmware, certificate identity, and assigned user roles to configuration and update activity.

Contacts, Relays, and Ethernet Connectivity

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 exposes system-wide contacts, a protection-fault relay, and three Ethernet ports so the chassis can exchange commands, state, and engineering traffic.

Four system contacts

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 accepts Reset, Alarm Inhibit, Trip Multiply, and Configuration Lock at the system boundary.

Protection fault relay

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 changes the external relay state when the protection path is not operating normally.

Three independent Ethernet ports

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 provides copper Ethernet access for configuration and supported system communications over runs up to 100 m.

Product Questions

How should a buyer choose between the two Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 variants?

Choose inside Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 by the required hazardous-area approval: 60R/SIM01-00-0 has no hazardous-area certification, while 60R/SIM01-02-0 carries the Multi approval execution. Keep the selected complete Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 on the enquiry rather than shortening it to the shared base code.

Why can Orbit Studio see the network but fail to change the configuration through Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0?

For Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0, check whether the SIM is in Run or Program mode and whether the Configuration Lock contact is active. Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 can maintain Ethernet communication while deliberately blocking configuration changes.

What should be checked when a Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 Ethernet link is intermittent?

For Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0, verify the RJ45 connection, selected network path, port speed negotiation, and that the copper run does not exceed 100 m. The LINK indication on Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 confirms internal communication, so separate internal-module status from the external Ethernet problem.

Why can alarms disappear after wiring a contact to Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0?

The System Alarm Inhibit contact on Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 suppresses configured alarming functions while active. Confirm the SAI contact state and the INHB indication on Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 before treating the missing alarms as a processor or sensor failure.

How should a protection-fault indication from Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 be investigated?

A fault state on Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 means one or more protection functions are not operational. Use the FAULT indication and system events from Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 to locate the affected module or configuration instead of replacing the SIM solely because its relay changed state.

Can Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 be replaced without retaining the existing configuration?

A replacement Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 must receive the intended Orbit 60 configuration before normal service. Preserve the configuration record and use Orbit Studio to send or retrieve the correct file for the selected Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 approval variant.

Moore Automation Advantages

MOORE AUTOMATION

https://www.mvme.cn/

Moore Automation combines broad industrial-automation product coverage with organised handling of suffixes, customer files and logistics instructions. Product, document and communication records follow one consistent enquiry trail.

Brand coverageMultiple automation manufacturers

Suffix trackingOption fields kept distinct

Document continuityFiles linked to the enquiry

Logistics optionsInstructions recorded by request

www.mvme.cn

Product Recommendations

Sales Enquiries

Discuss 60R/SIM01-00-0 / 60R/SIM01-02-0Send the required quantity and destination for a model-specific enquiry.

ManagerLeonia

Emailsales@mvme.cn

WhatsApp+86 180 3017 5807

Product Name	Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 \| Orbit 60 System Interface Module
Item NO.	2926048
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	BENTLY NEVADA
Brand	Bently Nevada
Creation Time	2026-10-22

Bently Nevada 60R/SIM01-00-0 / 60R/SIM01-02-0 | Orbit 60 System Interface Module Item NO.: 2926048