Coaxial input from probe system
The probe and selected extension cable form the high-frequency sensing circuit connected to the Proximitor.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330180-X1-05 Mod:145004-59 / 330180-X1-05 Mod:145004-87 3300 XL 5 mm/8 mm Proximitor Sensors |
| Item NO. | 2943271 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 330180-X1-05 Mod:145004-59 and 330180-X1-05 Mod:145004-87 are 3300 XL Proximitor Sensors for 5 mm and 8 mm proximity transducer systems. Each sensor energizes the matched probe circuit, receives the response through the probe and extension cable, and converts target gap into the DC output used by the connected monitoring channel.
The two units share the 330180 family and -05 multiple-approval option, but 330180-X1-05 Mod:145004-59 and 330180-X1-05 Mod:145004-87 carry different controlled modification strings. X1 is not one of the standard system-length and mounting choices published in the ordering table, so neither X1 nor the MOD number is expanded into an unsupported configuration claim.
With the correct probe and cable combination, 330180-X1-05 Mod:145004-59 and 330180-X1-05 Mod:145004-87 participate in the 5 mm/8 mm system’s 7.87 V/mm nominal scale and 2.0 mm linear range. The Proximitor output travels on shielded field wiring; the coaxial probe circuit ends at the Proximitor rather than continuing directly to the monitor.
| Attribute | 330180-X1-05 Mod:145004-59 | 330180-X1-05 Mod:145004-87 |
|---|---|---|
| Brand | Bently Nevada | |
| Product name | 3300 XL 5 mm/8 mm Proximitor Sensor | |
| Base part number | 330180 | |
| System family | 3300 XL 5 mm and 8 mm | |
| System-length / mounting field | X1 — verify from label | X1 — verify from label |
| Agency option | 05, multiple approvals | |
| Modification identity | Mod:145004-59 | Mod:145004-87 |
| System linear range | 2.0 mm | |
| System scale factor | 7.87 V/mm | |
| Recommended system gap | 1.27 mm | |
| Supply requirement | -17.5 to -26 V DC | |
| Field wiring | 3-conductor shielded triad | |
| Maximum field-wiring length | 305 m | |
The Proximitor is the conversion boundary between a coaxial sensing circuit and the field signal.
The probe and selected extension cable form the high-frequency sensing circuit connected to the Proximitor.
Oscillation, demodulation and linearization turn the target-dependent response into the 7.87 V/mm nominal output.
Power, common and output use field terminals and three-conductor shielded wiring rather than a continuation of the coaxial cable.
The standard 330180 function is documented, while X1 and each MOD suffix remain exact label-controlled fields.
This modification stays paired with its own model label and must be recorded separately in photos and commercial documents.
The -87 unit is not collapsed into the -59 record even though both begin with 330180-X1-05.
Probe type, extension length and Proximitor configuration must be verified as a complete 5 mm or 8 mm chain before connection.
330180-X1-05 Mod:145004-59 and 330180-X1-05 Mod:145004-87 use three-conductor shielded field wiring from the Proximitor terminals to the monitor, within the published length limit.
The controlled MOD suffix differs, so each exact 330180-X1-05 model must remain on its own record.
Option 05 orders multiple approvals for 330180-X1-05 Mod:145004-59 and 330180-X1-05 Mod:145004-87, but verify the actual markings on each label before installation.
330180-X1-05 Mod:145004-59 and 330180-X1-05 Mod:145004-87 serve matched 3300 XL 5 mm or 8 mm probe systems; verify the complete probe, extension cable and Proximitor combination.
A correctly matched 5 mm/8 mm system containing 330180-X1-05 Mod:145004-59 or 330180-X1-05 Mod:145004-87 uses the nominal 7.87 V/mm scale factor.
No. X1 is not a standard published choice; use the unit label or controlled drawing for 330180-X1-05 Mod:145004-59 or 330180-X1-05 Mod:145004-87.
Moore Automation Limited can keep product labels, requested manuals and commercial documents associated with the exact enquiry item. Where a custom or modification code is present, the team records it without replacing it with a shorter family name.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found