303 stainless body
The enclosure carries the cover, conduit openings and retainer that hold the internal cable connection.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 24701-28-05-30-020-04-02 24701 Stainless Steel Proximity Probe Housing Assembly |
| Item NO. | 2943266 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 24701-28-05-30-020-04-02 is a stainless-steel proximity probe housing assembly configured for a 3300 XL 8 mm probe with multiple approvals. The 303 stainless housing contains the cable connection, the 304 stainless sleeve positions the probe through the machine case, and the mounting adaptor fixes the complete assembly at the measurement location.
The geometry of 24701-28-05-30-020-04-02 combines a 0.5 m probe cable, 3.0 in standoff and 2.0 in penetration. Conduit option 04 supplies one 3/4-14 NPT plug without a cable fitting, while mounting option 02 retains the 3/4-14 NPT machine-case adaptor.
The sleeve in 24701-28-05-30-020-04-02 is adjusted relative to the outer housing before the probe gap is finalized. The stainless assembly is rated Type 4X/IP66 and has a typical mass of 1.8 kg; its 5.0 in combined standoff and penetration is below the support threshold applied to sleeve lengths above 12 in.
| Attribute | 24701-28-05-30-020-04-02 |
|---|---|
| Brand | Bently Nevada |
| Product name | 24701 stainless proximity probe housing |
| Probe option | 28, 3300 XL 8 mm with multiple approvals |
| Probe cable length | 0.5 m |
| Standoff length | 3.0 in |
| Penetration length | 2.0 in |
| Conduit selection | One 3/4-14 NPT plug only |
| Mounting thread | 3/4-14 NPT |
| Housing body | 303 stainless steel |
| Probe sleeve | 304 stainless steel |
| Ingress protection | Type 4X / IP66 |
| Typical mass | 1.8 kg |
| Combined coded length | 5.0 in |
The housing protects the connection while the sleeve establishes the probe’s axial position.
The enclosure carries the cover, conduit openings and retainer that hold the internal cable connection.
The sleeve passes through the mounting adaptor and supports the probe on the path toward the target.
After the probe gap and sleeve depth are set, the retaining hardware fixes the sleeve before the cover is closed.
Unlike configurations supplied with a cable fitting, this code closes the selected opening with a plug.
Option 04 provides one 3/4-14 NPT plug only, so an outgoing cable fitting is not part of that option.
The probe cable still returns into the housing; its termination is kept within the sealed enclosure.
The final 02 field still supplies a 3/4-14 NPT machine-case adaptor and must not be confused with the conduit opening.
No. Conduit option 04 on 24701-28-05-30-020-04-02 supplies one 3/4-14 NPT plug only.
Its coded standoff plus penetration is 5.0 in, so 24701-28-05-30-020-04-02 is below the above-12-in support threshold.
24701-28-05-30-020-04-02 has a 3.0 in standoff and a 2.0 in penetration.
The probe is adjusted within the stainless sleeve of 24701-28-05-30-020-04-02 before the retainer and cover secure the final arrangement.
24701-28-05-30-020-04-02 uses a 303 stainless-steel housing body and a 304 stainless-steel probe sleeve.
The 28 field configures 24701-28-05-30-020-04-02 with a 3300 XL 8 mm probe using the multiple-approval option.
Moore Automation Limited handles enquiries for current, rare and obsolete automation components by preserving the exact requested code. The team can coordinate available commercial information and shipment options without treating a visually similar or same-series item as an automatic substitute.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found