Gap-to-output relationship
Bently Nevada 330173-00-05-10-02-00 operates over a 2.0 mm (80 mil) linear range. With the target gap set near 1.27 mm (50 mils), the probe response is passed to the Proximitor Sensor for conditioning and monitoring.
Bently Nevada · 3300 5 mm Transducer SystemMoore Automation · Technical Record
Legacy 3300 Measurement Hardware
Bently Nevada 330173-00-05-10-02-00
| 3300 5 mm M8 × 1 Proximity Probe
Complete model · 330173-00-05-10-02-00
01
Product Description
Bently Nevada 330173-00-05-10-02-00 is a 3300 5 mm eddy-current proximity probe with an M8 × 1 threaded case and no armor. It is the sensing element in a 3300 5 mm Transducer System, where the probe converts the distance to a conductive machine target into the electrical response used for static position and dynamic vibration measurement.
In the matched signal path, Bently Nevada 330173-00-05-10-02-00 works with a 3300 XL extension cable and a compatible Proximitor Sensor. A change in probe-to-target gap changes the conditioned output; the probe itself is not a monitor, so the cable, Proximitor and monitor must remain part of the same calibrated system length.
The five suffix groups on Bently Nevada 330173-00-05-10-02-00 retain the supplied configuration: 00 selects a 0.0 mm unthreaded length, 05 selects a 50 mm case length, 10 selects a 1.0 m total length, 02 selects the standard miniature coaxial ClickLoc connector, and the final 00 indicates that an agency approval option is not required. The M8 × 1, unarmored construction is the fixed base execution identified by 330173.
02
Technical Specifications
- Brand
- Bently Nevada
- Complete model
- 330173-00-05-10-02-00
- Product type
- 3300 5 mm proximity probe
- System family
- 3300 5 mm Transducer System
- Base probe number
- 330173
- Thread execution
- M8 × 1 thread
- Armor execution
- Without armor
- AA unthreaded length
- 00 = 0.0 mm
- BB overall case length
- 05 = 50 mm
- CC total length
- 10 = 1.0 m (3.3 ft)
- DD connector option
- 02 = miniature coaxial ClickLoc connector, standard cable
- EE approval option
- 00 = agency approval not required
- Probe tip diameter
- 5.2 mm
- Linear range
- 2.0 mm (80 mils)
- Recommended gap
- 1.27 mm (50 mils)
- Scale factor
- 7.87 V/mm (200 mV/mil), ±6.5%
- Probe power path
- −17.5 to −26 Vdc system supply; 12 mA maximum
- Operating temperature
- Probe: −35 to +177 °C
- Cable construction
- 75 Ω triaxial FEP cable
- Field wiring
- 3-conductor shielded triad, 0.2–1.5 mm²; up to 305 m to monitor
- Target material used for specifications
- AISI 4140 steel
- Connector interface
- Miniature male coaxial ClickLoc, 7.23 mm maximum outside diameter
03
Measurement Performance
Bently Nevada 330173-00-05-10-02-00 turns a controlled conductive target gap into a proportional measurement signal. The performance values below describe the probe inside the complete 3300 5 mm transducer path, not a standalone monitor output.
Scale and accuracy
The nominal scale for the 3300 5 mm system is 7.87 V/mm (200 mV/mil) with a ±6.5% tolerance. That scale links the physical gap change at Bently Nevada 330173-00-05-10-02-00 to the voltage change presented by the matched electronics.
Temperature and target
The probe operating range is −35 to +177 °C, and the stated electrical values use an AISI 4140 steel target. The target material and the installed gap therefore remain part of the measurement setup for Bently Nevada 330173-00-05-10-02-00.
04
System Integration
The installation path for Bently Nevada 330173-00-05-10-02-00 has three defined stages: the probe at the machine, the extension cable between field and cabinet, and the Proximitor Sensor that supplies excitation and conditions the signal.
Probe and target
The M8 × 1 case of Bently Nevada 330173-00-05-10-02-00 is mounted so the 5.2 mm probe tip faces the conductive target with the specified gap. The mechanical mount must hold that relationship while the shaft or target moves.
Cable and connector
The 1.0 m probe assembly uses the standard miniature coaxial ClickLoc connector identified by DD 02. The cable path is a 75 Ω triaxial FEP construction, and any field wiring must preserve shielding and the total calibrated electrical length for Bently Nevada 330173-00-05-10-02-00.
Proximitor and monitor
The compatible Proximitor Sensor receives the probe and extension-cable signal, provides the negative supply path and outputs the conditioned displacement or vibration signal to the monitoring system. Bently Nevada 330173-00-05-10-02-00 is therefore ordered and installed as one matched transducer-system component.
05
Frequently Asked Questions
What is Bently Nevada 330173-00-05-10-02-00?
Bently Nevada 330173-00-05-10-02-00 is a 3300 5 mm M8 × 1 proximity probe with a 50 mm case, 1.0 m total length, standard ClickLoc connector and no armor.
What does 330173 mean in Bently Nevada 330173-00-05-10-02-00?
In Bently Nevada 330173-00-05-10-02-00, 330173 identifies the 3300 5 mm metric probe with an M8 × 1 thread and without armor.
What does 00-05-10-02-00 mean on Bently Nevada 330173-00-05-10-02-00?
For Bently Nevada 330173-00-05-10-02-00, the suffix selects 0.0 mm unthreaded length, 50 mm case length, 1.0 m total length, standard ClickLoc connector and no agency approval option.
Which sensor works with Bently Nevada 330173-00-05-10-02-00?
Bently Nevada 330173-00-05-10-02-00 belongs in the 3300 5 mm transducer path with a compatible Proximitor Sensor and the matching extension-cable arrangement.
What gap is used for Bently Nevada 330173-00-05-10-02-00?
The stated reference gap for Bently Nevada 330173-00-05-10-02-00 is 1.27 mm (50 mils) against an AISI 4140 steel target; the installed gap must follow the complete system setup.
What temperature range applies to Bently Nevada 330173-00-05-10-02-00?
The probe temperature range for Bently Nevada 330173-00-05-10-02-00 is −35 to +177 °C. The cable and Proximitor ratings must also be checked for the installed transducer system.
06
Company Profile
Moore Automation
Moore Automation supports industrial automation enquiries with complete manufacturer and model records, clear quotation communication and coordinated export supply.
For 330173-00-05-10-02-00, the product identity, technical configuration and order quantity remain together so the requested Bently Nevada record is easy to review.
The complete 330173-00-05-10-02-00 string stays visible during quotation.
Industrial control, monitoring and instrumentation records can be reviewed together.
Quantity, packing and dispatch details stay linked to the enquiry.
07
No related record found