FluidLoc cable core
FluidLoc identifies the integral cable construction selected by option 12 and continues the probe circuit to the ClickLoc.
Welcome to Moore Automation Limited
Copy and share this link on social network or send it to your friends
Copy| Product Name | Bently Nevada 330104-00-04-10-12-05 3300 XL 8 mm M10 × 1 Armored FluidLoc Proximity Probe |
| Item NO. | 2943253 |
| Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
| Category | BENTLY NEVADA |
| Brand | Bently Nevada |
| Creation Time | 2026-11-20 |
Bently Nevada 330104-00-04-10-12-05 is an armored M10 × 1 proximity probe in the 3300 XL 8 mm transducer system. Its sensing coil responds to target distance, the armored FluidLoc lead carries that response to the extension-cable interface, and the matched Proximitor Sensor supplies excitation and converts the probe response into the voltage read by the monitor.
The mechanical fields of 330104-00-04-10-12-05 specify 0 mm unthreaded length and a 40 mm case, followed by a 1.0 m total probe length. Option 12 provides FluidLoc cable and a miniature coaxial ClickLoc without a connector protector; the metal armor protects the integral lead, while FluidLoc describes the cable construction inside that route.
In the complete 8 mm measurement chain, 330104-00-04-10-12-05 uses the 2.0 mm published linear range, 1.27 mm recommended gap and 7.87 V/mm nominal scale factor. The final 05 is the multiple-approval order option and leaves the probe geometry and signal scale unchanged.
| Attribute | 330104-00-04-10-12-05 |
|---|---|
| Brand | Bently Nevada |
| Product name | 3300 XL 8 mm armored FluidLoc proximity probe |
| Probe base | 330104, M10 × 1 with armor |
| Unthreaded length | 0 mm |
| Overall case length | 40 mm |
| Total length | 1.0 m |
| Cable option | FluidLoc cable with armor |
| Connector | Miniature coaxial ClickLoc |
| Connector protector | Not included in option 12 |
| System linear range | 2.0 mm |
| Recommended gap | 1.27 mm |
| System scale factor | 7.87 V/mm |
| Field wiring limit | 305 m |
| Agency option | 05, multiple approvals |
The exact code combines two cable attributes that must not be collapsed into one description.
FluidLoc identifies the integral cable construction selected by option 12 and continues the probe circuit to the ClickLoc.
The 330104 base adds mechanical armor around the lead. That armor does not replace the coaxial conductors carrying the probe response.
Option 12 omits a fitted connector protector, so the ClickLoc interface remains a separately managed installation boundary.
The case sets the installed physical reach; the gap then places the target within the calibrated response.
With 00 unthreaded length, the M10 × 1 threaded case is the main reference used to move the sensing tip toward the target.
A 1.27 mm initial gap lies inside the approximately 0.25–2.3 mm system range rather than at either end.
The Proximitor output leaves on shielded field wiring, keeping the machine-side coaxial probe circuit separate from the monitor connection.
Armor on 330104-00-04-10-12-05 mechanically protects the integral lead; the signal still travels through the coaxial cable conductors.
The final 05 orders multiple approvals for 330104-00-04-10-12-05; verify the actual label markings against the site requirement.
They identify 0 mm unthreaded length and a 40 mm overall case on 330104-00-04-10-12-05.
The published recommended gap for the matched 8 mm system containing 330104-00-04-10-12-05 is 1.27 mm.
No. The 12 field on 330104-00-04-10-12-05 selects FluidLoc cable and the ClickLoc connector without a protector.
Complete 330104-00-04-10-12-05 with the 8 mm extension cable and Proximitor Sensor selected for the required calibrated system length.
Moore Automation Limited combines an established automation-parts inventory with enquiry records built around exact product codes. The account manager can coordinate requested model evidence, quotation details and delivery updates while keeping technical identification separate from substitution decisions.
Moore Automation Sales Team
Copyright © 2004–2026 www.mvme.cn. All rights reserved.
Disclaimer: Moore Automation Limited is an independent reseller and is not an authorized distributor or representative of the manufacturers featured on this website. Product names and trademarks belong to their respective owners.
No related record found